Question about Televison & Video

1 Answer

I have a denon 1720 dvd player. When you press the power button it comes on for 3 seconds then the power button turns back red and powers off. If you press the eject button within the 3 seconds the tray opens and the power button stays green. As soon as you close the tray the power agin goes to red. Can you help? thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Same equql problem....?????

Can you help?



i have a denon 1720 dvd player. When you press the power button it comes on for 3 seconds then the power button turns back red and powers off. If you press the eject button within the 3 seconds the tray opens and the power button stays green. As soon as you close the tray the power agin goes to red. i have a denon 1720 dvd player. When you press the power button it comes on for 3 seconds then the power button turns back red and powers off. If you press the eject button within the 3 seconds the tray opens and the power button stays green. As soon as you close the tray the power agin goes to red. Can you help? thanks thanks

Posted on Jul 26, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Manual dvd denon1720


You may download the manual from Denon DVD 1720 Manual DVD Video Player HiFi Engine

You need to register, but it's free.

Dec 27, 2016 | Denon DVD-1720

1 Answer

I have dish network and an apex 1225 dvd player. i do not have a remote for the dvd player. i do however have a dish network platinum remote control. i am in need of the code to link this remote control to...


Try the steps below these processes are called a power scans, there is a different type for any equipment needed. This should take 5-6 minutes per item to program.

For DVD/VCR's:
1.) Press and hold the correct VCR/DVD button (about six seconds) until all mode button backlights come on, then release.
2.) Press 222 pound (#) then record three times.
3.) With the desired equipment on, press and hold the VCR/DVD button until all mode button backlights illuminate (about 3 seconds), then release.
4.) Press and release the Power button.
5.) Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
6.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.

For TV's:
POWER SCAN
1.) Hold down the clear "TV" button on the remote for four seconds, then press 500 pound ( #)
2.) Hold down the clear "TV" button on the remote for four seconds, press the big power button once.
3.) Press the channel up button once per second until the TV turns off then press pound (#).

For any other equipment:
Power Scan AUX
1.) With the desired equipment on, press and hold the correct AUX button until all mode button backlights illuminate (about 3 seconds), then release.
2.) press 0 for a TV, press 1 for a VCR/DVD, press 2 for any other device, then press *.
Press and release the large red Power button.
3.) Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
With any of these methods verify the code works by trying several different functions for that equipment.

Daniel Busa
DISH Network
Customer Service

Mar 20, 2011 | Apex Digital AD-1225 DVD Player

1 Answer

How do i program my GPX D1816 dvd to dish network remote control? thank you.


Currently we do not have any codes listed for that brand of DVD player. I would like to suggest a method called a power scan the steps are below:

1.) Press and hold the correct VCR button (about six seconds) until all mode button backlights come on, then release.
2.) Press 222 pound (#) then record three times.
3.) With the desired equipment on, press and hold the VCR/DVD button until all mode button backlights illuminate (about 3 seconds), then release.
4.) Press and release the Power button.
5.) Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
6.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
To verify the code works try several different functions for that equipment.

Daniel Busa
DISH Network Customer Service

Feb 27, 2011 | GPX D1816 DVD Player

1 Answer

Im trying to program my remote so all my compents will work on one remote but dish network doesn't have the code for my polaroid vhs/dvd player. The model no is dvc 2010. If anyone has the code please post...


Try these steps for progamming the remote, if this doesn't help there is a compatibility issue.

  1. With the desired equipment on, press and hold the correct Mode button until all mode button backlights illuminate (about 3 seconds), then release.
  2. For AUX mode Power Scan ONLY: press 0 for a TV, press 1 for a VCR/DVD, press 2 for any other device, then press *.
  3. Press and release the Power button.
  4. Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will power off.
  5. Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times.
  6. To verify the code works try several different functions for that equipment.

Daniel Busa
DISH Network Customer Service

Jan 18, 2011 | Polaroid 1720-7 Remote Control

1 Answer

Codes to use dish network remote on cyberhome dvd player


Power scan instructions:

Step 1:
Press and hold the TV mode button until all mode button back lights illuminate,then release.

Step 2:
Press and release the Power button.

Step 3:
Press the Up button once a second while pointing the remote at the desiredequipment. If the code for the equipment comes up, the equipment will poweroff.

Step 4:
Press the pound (#) button. If the code entered is valid for the remote, themode light flashes three times.

After doing the power scan please remember to put the remote back into SATmode. Thanks so much for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

Sep 01, 2010 | Cyberhome CH-DVD 300 DVD Player

2 Answers

I got a denon 2930 when i press eject all that happens is draw doesnot open and it says demo mode


At the player stop condition, press 2 buttons for DVD operations (play and skip fwd) until until "INITIALIZE" appears and disappears in the FL

Dec 04, 2009 | Denon DVD 2930 DVD Player

1 Answer

Denon DVD 910 won't power up. Light goes off then on.


Possibly a power supply problem, not enough power.

Could be these:

- dried up filter capacitors (electrolytic) - these include: main filter capacitor (the biggest one),
any final filter capacitors at each voltage output section, also at the oscillator end.
Check for any blown up, leaked or (partially) shorted capacitors.

- burnt out components (resistors, diodes).
Replace these (assuming you can still determine the proper value or type).

- poor solder contacts.
Remove the old solder and resolder the pins.

Dried, leaked or blown up capacitors may cause the power supply to crash down (or cycle with very low power output).
Burnt out components may act as a short circuit line, a change in conductivity (resistance) or as an infinite resistance (open contacts).
Poor solder contacts (so called "cold contacts") originate from bad soldering (at the factory), being further loosened by component overheating and tensile stresses (moving your equipement from place to place causes the circuit board to bend a little bit each time, and this, in turn loosens the solder contacts even further, causeing more overheating which may melt the solder, and so on).
You can tell a poor solder contact from a good one: bad ones will have a circular crack in the solder around the pin - try moving the pin a bit with a pair of tweezers - if it moves, there's your bad contact (you'll need a good light source and possibly a magnifying lens to spot these).

hopefuly you can get closer to a solution using these hints.

regards

3rq8 (Triarcuate)

Jul 14, 2009 | Denon DVD-910 DVD Player

1 Answer

Unlock Deno 2910


Hi,

Initially, pls try:
  • Verify that the tray is empty/no disc in the player;
  • Shut down/off with the front panel On/Off button and not the standby;
  • Press and hold the Open/Close, Play and Skip Reverse (I<<) buttons;
  • Maintain pressing on the above buttons and Power-ON the player with the On/Off button, (again while still holding the above buttons till the "Denon 2910" disappears from the display);
  • pls wait till LOADING completes and the front panel would display 0:00:00;
  • Using the remote control, enter 7, 3, 1, 9, 4, 6, 2, & 8;
  • The Denon 2910 will go into standby mode. Soon as it is on standby, pls press the Standby button on the front panel;
  • Pls verify region free update by pressing the Stop and Skip Forward (>>I) buttons on the front panel. The display would show “Region_Ax” The x would be the former region number that the Denon 2910 is locked into;
  • Should it not work ouot as expected, pls redo all the above steps.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.

Nov 10, 2008 | Denon DVD-2910 DVD Player

1 Answer

DVD Player S99


just use yelloew out and red white for sound left right those red whites are into tv input on back 1 or 2 yellow in yellw for video red in red for right sound white for left sound then turn on dvd player use tvs remote select input 1 or 2 thats it hit play

Mar 13, 2008 | Amphion Mediaworks S99 DVD Player

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

350 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72670 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...