Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 80 series 110 washer making loud noise during final spin

Kenmore top loader washer has been making a loud rumbling noise as the spin cycle concludes. All else is normal--machine still works.

Posted by on

  • Anonymous Dec 29, 2008

    I have a Kenmore 80 series washer. Durring the spin cycle the drum flops around and beats on the sides and sounds like its going to come apart. How do I fix it.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 242 Answers

Make sure all springs are still in their place tilt the machine back and look under it and you can see them. 2nd all legs must be level as well as the floor.

Posted on Dec 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer makes rumbling noise during spin cycle


You have to take the whole drum out and IT IS YOUR BEARING(s). Order all four of them

Oct 22, 2014 | Washing Machines

2 Answers

Loud clanking noise during spin cycle. Will not


If it is a front loader, then remove the rear panel, remove the belt, and soin drum by hand, if it feels rough, or is noisy and rumbling, then the main drum bearings have failed.
This is a major repair.

Feb 01, 2010 | Whirlpool LHW0050PQ Front Load Washer

1 Answer

Kenmore TL Washer Just Hums


try to wash by 1/2 load the same cycle maybe the problem come from overload laundary

Jun 06, 2009 | Washing Machines

1 Answer

Loud noise coming from bottom of washer during spin cycle


If it is a ge kenmore it sounds like your tub bearing is dry and needs to be replaced.The reason i say ge kenmore is because they fall under differant companys depending on witch year you bought it

May 07, 2009 | Whirlpool Inglis IP4400 Washer

1 Answer

Model 110 washer will not go into a final high speed spin.


hi, i would suggest the timer/programmer is faultyas it is ok on the other cycles, the noises you have described may have caused some damage,

Feb 10, 2009 | Washing Machines

1 Answer

I have a Kenmore series 80 washer that is making a loud clunking


check the motor coupler between the gearcase and motor for wear. If it is cracked or broken it will need to be replaced

Jan 04, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore series 80 washer makes loud knocking noise during spin cy


Unless your front loader is set firmly on concrete and leveled to perfection, the force of a heavy wash load spinning in excess of 1000rpm will create a bit of vibration and noise.A firm footing is your best defense against to much movement.
Also due to the earlier movements during the spin cycle, the shocks that are used to dampen the spin cycle might have been broken or damaged.
If the problem persists inspite of proper levelling, please do check for the shocks or might have them replaced them for good.

Dec 14, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore series 80 washer makes loud knocking noise during spin cycle


Most washer tubs are suspended by heavy rubber O-rings. These do fail with age so that the tub is not being held centered anymore. I suspect one of them has failed or come off during a severely unbalanced load.

Dec 14, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

1,039 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...