My printer is connected to router in network but my computer cannot see it. my printer is a transfer from my store to the house can you please help me? thank you

Hi, you have to set up your printer as a device that can be communicated in your LAN by the two PCs.

To set up your printer properly in the LAN, you need to assign a fixed IP to this printer such that whenever it is switch on again, both PC still communicate to this printer without changing the new IP assigned to this printer.

You need to set up this fixed IP properly in your DLink router. For guidance please check this in your user manual of the Dlink. Please let me know any problem you may have again in future.

Click Start, All Programs, HP, HP Deskjet, Connect a new printer. Choose Network Printer, then connect the USB. It will transfer the wireless settings. Unplug USB. Viola! Wireless works.

From your description, you appeared to have to have set up the printer correctly to print over your internet.
Can you see the remote computer from the main computer and the remote computer from the main computer?
Are both computers in the same workgroup or network name?

You may want to check your installation against my instruction on setting up a shared printer.
Please click on this link and follow my instruction on setting up a shared printer in a network :-
http://www.fixya.com/support/r3668797-setting_up_shared_network_printer

please do not assign dynamic IP on the network printer. give a static IP on it base on your network config. and also, please do assign all you computers on the network with static IP's so that every time they boot there will be no IP conflict or problem on the network connection.

Move the wireless printer as close as possible to the wireless router, and see if it works better.

you can connect it ...connect one computer with LPT cable and another with usb cable ... first make sure that printer heaving lpt port or not .....

Instead, talk to a Mac-guru, in a computer-store that specializes in Apple computers.

Hi,
U can give the sharing to one of the folders in the PC1 and search the file in the PC2 so that u can transfer the files with the help of network connections

or

The other method is the u can use the PC mover software and transfer the files from one system to other.You can download the s/w from the below link

http://www.freedownloadscenter.com/Utilities/Automation_Utilities/PCmover_Download.html

Regards,
Ayyasam

hi there,

Because printers and networks vary, the best instructions for setting up and networking your printer should be in its users manual. Also, your network-ready printer may have come with installation software that can help you share the printer over the network.

There are three main steps you need to take when networking a printer, including the following: Enable the File And Printer Sharing setting, Make the printer available to all users, and Direct PCs to the printer.

For detailed instructions on sharing printers at home, please refer to the "Get Your House In Order" article in the "See Also:" section below.

For detailed instructions on sharing printers in a small business, please refer to the "Select & Share The Right Printer For Your Small Business"

hello
modems,routers (switches,hubs) are all used for connecting a network together these are not used for storing files
just used in transfer of data , sorry


July
rate me please