Why does my camera says card proyected when i take pictures

Just use your front facing camera or download a mirror app from I store

There are several possible causes for this.

1a) The pictures are in a folder unknown to the camera. This could be due to the folder name, or its position in the folder structure.

1b) The pictures have filenames that do not correspond to the camera's naming scheme.

2a) The pictures were taken by a different camera. Many cameras will not display pictures that were taken by a different camera.

2b) The pictures have been edited on a computer. Many cameras will not display altered pictures.

Unless you have very strong reasons for keeping some pictures on the card, you should have the camera format the card after you download the pictures to a computer. Formatting wipes out all information on the card, preparing it afresh for further use. Failure to format the card periodically can lead to future problems.

If you need to keep some pictures on the card, format the card in the camera, then use a card reader to put the pictures back onto the card.

There are several possible causes for this.

1a) The pictures are in a folder unknown to the camera. This could be due to the folder name, or its position in the folder structure.

1b) The pictures have filenames that do not correspond to the camera's naming scheme.

2a) The pictures were taken by a different camera. Many cameras will not display pictures that were taken by a different camera.

2b) The pictures have been edited on a computer. Many cameras will not display altered pictures.

Unless you have very strong reasons for keeping some pictures on the card, you should have the camera format the card after you download the pictures to a computer. Formatting wipes out all information on the card, preparing it afresh for further use. Failure to format the card periodically can lead to future problems.

If you need to keep some pictures on the card, format the card in the camera, then use a card reader to put the pictures back onto the card.

possible bad picture tube ,

cameras : My Camera Freezes When I Turn It On Or Take A Picture

P, td, li {font-family: arial, u; font-size:9pt; margin-top:0px;margin-bottom:0px; word-spacing:1px;} If you camera freezes when you power it on or when you try to take a picture, you may have a defective memory card. To test your camera and the memory card, follow these steps:

1. Power off your camera.
2. Remove the battery from your camera. If you have a memory card inside the camera, remove that as well.
3. Clean out any dust or debris inside the battery compartment, and then re-insert the battery into your camera.
4. Power your camera on without the memory card installed.
5. Take a picture.
• If your camera takes a picture, re-install the memory card, and then go to Step 6.
• If it does not take a picture, your camera requires service. To set up service, click the Create Online Service Request button below.

1. Format the memory card in the camera, and then take another picture.
Important: Formatting erases all pictures and other data from the card. If you have pictures on the memory card you want to keep, download those pictures to your computer before you format the memory card.

• If your camera does not take a picture with the formatted memory card installed, replace the memory card.
• If the issue still persists after you’ve installed a new memory card, your camera requires service. To set up service, click the Create Online Service Request button below

Hi, you might be experimenting a Dmd problem ,this is how it works:http://electronics.howstuffworks.com/dlp1.htm God bless you!

100 % YOU PROYECTION LAMP BROKE OR NEEDS TO BE RESET

HOW OLD IS THE TV ?? IF IS OLDER THAN FIVE YEARS THE PROYECTION BULBS MAY NEED TO BE REFILLED AND CLEANED BY A PROFESSIONAL TECH

You can add memory to your camera by purchasing an xd memory card.
Compatible cards
xD-Picture Card (16MB – 1GB)
There are two ways to record the pictures you take with this camera.
Recording pictures to the internal memory
• Pictures are recorded to the internal memory, and when the number of storable still
pictures reaches 0, you must connect the camera to a computer to download the
pictures, and then erase the pictures from the internal memory.
Using an xD-Picture Card (optional)
• Pictures are recorded to the card when inserted in the camera. When the card is
full, you download the pictures to a computer, and then either erase the pictures
from the card or use a new card.
• Pictures are not recorded to the internal memory when a card is inserted in the
camera. Pictures in the internal memory can be copied to the card using the
[BACKUP] function.
g“BACKUP Copying pictures in the internal memory to the card” (P.25)
“The card” (P.60)
Number of storable still pictures and recording length of movies
Still pictures
Movie
• If you use a non-Olympus card or a card used for another application, such as for
a computer, the message [CARD ERROR] is displayed. To use this card with this
camera, use the [FORMAT] function to format the card.
g“MEMORY FORMAT (FORMAT) Formatting the internal memory/card” (P.24)
Additional shooting tips and information
Increasing the number of pictures that can be taken
IMAGE QUALITY Image size
Number of storable still pictures
Internal memory Card (128 MB)
SHQ 2816 × 2112 2 25
HQ 2816 × 2112 6 76
SQ1 2048 × 1536 8 108
SQ2 640 × 480 60 726
IMAGE QUALITY Image size
Remaining recording time
Internal memory Card (128 MB)
HQ 320 × 240 (15 frames/sec.) 32 sec. 6 min. 37 sec.
SQ 160 × 120 (15 frames/sec.) 2 min. 8 sec. 26 min. 28 sec.

If, in a dark room you can't even see the screen lit up, you have probably lost your high voltage driving the picture tubes and if the set is over 10 years old, I'm pretty certain that the parts will be no longer available -- that is one of my pet peeves about Mitsubishi. If you can see a grayish screen, then maybe there's a chance it could be repaired by a competent and dedicated technican.