Question about Power Generators

1 Answer

Need carburetor part # 1481K10 for Tecumseh cast-iron sleeve 10hp

I have a Generac c5032 series(serial #1124620) with Tecumseh engine and need to replace the carb.

Posted by on

  • John McKinney May 11, 2010

    I have tried looking up that part number, and it does not seem to exist. If you can get me the numbers (Model, Spec., and Serial) off of the Tecumseh engine, I can reccomend a couple great places to get your carb at. Thanks.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

You could try a briggs and strtton dealer as they took over generac but think with it being a tecunseh engine you will have a big problem as that side of the company went under a few years back,sorry cant be of more assistance

Posted on Mar 30, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Generac xg10000e won't start


Very annoying is the word. In order for many on todays small engines to pass EPA regulations, the carburetor is set very lean. This makes them very hard to get started and warmed up. Once warm, most will run OK .
Try choking a little 'til it is warmed up and running smoothly. Some have an adjustable main jet that can be opened a little to overcome this problem.
Some are not adjustable and some have a small plastic cap over the adjusting screw. The plastic cap is supposed to be a tamper proof thing.
If you still have trouble take it to the local small engine man. I am sure he has the cure or marbe he can adjust under warranty.
Hope this helps. Robert

May 12, 2012 | Generac 5802 XG10000E XG Series 10000 Watt...

1 Answer

Looking for a drawing that shows a breakdown of the carb on my 10 hp tecumseh engine


this should show you everything you need to see www.lawn-mower-shop.com/carb1.htm

Aug 04, 2011 | Generac 5724 GP Series GP3250 Portable Gas...

1 Answer

I have a Generac 5000 Power Plus 10HP Model 09856-0 Series 401 4891. It works fine but the gas tank petcock leaks. Where can I get a replacement and for reference I'd like to get a parts manual for future...


The original part number your looking for is 78298 (Plastic tank valve). It has been superseded by part number 080270 and it it available here:

http://www.ordertree.com/ARI.aspx?Mfg=36&Model=9856-0%20POWERPLUS,%205,000%20Watt

http://www.ordertree.com/AddtoCart.aspx?&ProductID=78298&ProductQlfr=GEN $5.34

Part Mfg: GENERAC Part Number: GEN 78298 This Part has been superseded arrowdown.gif Part Number: GEN 080270 Price: $5.34

When you do parts searches in the future for your generator use 9856-0 (Powerplus 5000Watt) for the model number.

You can also order the 080270 tank valve here:
http://www.jackssmallengines.com/searchdb2.cfm
If you enter the part number on the search page.
$4.60

Thanks for using FixYa.

Kelly

Jun 10, 2010 | Generac 13,000 Watt / 13,000 Watt Home...

1 Answer

Tecumseh model 100 engine 10hp on a coleman powermate generator it starts ok however after about 3 minutes the engine sputters like it is running out of gas and quits.


check the fuel mixture settings i believe main screw is 1 3/4 turns from closed and the idle screw is set at 1 1/4 turns from closed. These settings are for non OHV models. also check that if you have a fuel filter installed that it is not plugged up.

Sep 27, 2009 | Coleman Power Generators

1 Answer

Governor problem on 9 hp vanguard engine


Go online to Generac and they have parts list and owners manuals online. They will ship you parts.

Jun 25, 2009 | Generac 5724 GP Series GP3250 Portable Gas...

1 Answer

What carb does the powermate 6875 use?


check this web site http://www.powermate.com/productmanuals.php?cat_id=3 you can down load the manual and parts list for your gen.

Mar 24, 2009 | Coleman Powermate Powermate 5000W...

1 Answer

Carb bowl


The first thing I want to say is this.

If you have a chance to dump this Robin/Subaru Genset please do so!

I say this because the Manual docs for these R/S engines and/or Gensets are so poorly written in comparison to say Briggs & Stratton or Honda engines that it's like DAY and NIGHT in comparison.

My personal GENERAC 5500 Genset (that uses a B&S 10HP engine) Users Manual is like a Chilton Auto Manual in comparison to the R/S literature. No offense, but it's the truth!

It would be nice to have the WHOLE engine model # for starters, but seeings it's a 10hp Robin/Subaru it no doubt doesn't even have the TORX head style Carb bolts/studs requiring Torx sockets.

If it does by chance - then I'm not sure what size they normally are, as I don't have the exact model #, so I guess you're on your own there and will have to find a set of Torx sockets first.

If the Float Bowl has no Main Jet external adjustment screw assy at the bottom of the Float Bowl, or retainer bolt/nut, then the Float Bowl is screw threaded on in a CW direction.

You may have to use a rubber sleeve (like a 2" cut piece of rubber inner tubing from an old bike tire) and slip it over the bowl to help unscrew it. A smaller rubber band type wrench will work also, but I would hand tighten it so as not to damage anything.

It shouldn't be tightened on that tight to begin with. Be very careful replacing it and the seal gasket (or sometimes an O-ring) making sure the threads are lined up exactly right otherwise you will cross-thread the Bowl or the Carb Body!!

I can't be any more help then that, as that's all I have to work with here.

Let me know if that does it?

Post a reply here please.

Thx and best regards,

Frank

Sep 03, 2008 | Coleman Powermate Premium Plus 6250W...

Not finding what you are looking for?
Power Generators Logo

Related Topics:

433 people viewed this question

Ask a Question

Usually answered in minutes!

Top Power Generators Experts

John Trevino

Level 3 Expert

1378 Answers

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Power Generator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...