Question about LG 42PX5D 42 in. Plasma HDTV

Open Question

Cant find Mfg codes for 42" Viore Plasma for Verizon FIOS remotes

I have had the 42' Viore Plasma for 2 years and have never been able to find codes for other remotes.

Posted by on

  • Anonymous Jan 06, 2009

    We have the 32 inch Viore HD TV and can't find a code either.

×

6 Suggested Answers

  • 1 Answer

SOURCE: Code for Verizon FIOS remote Control

i have a konika television set and i can not get it to turn on or off with the verizon remote. I went through the booklet and it said to press the >> unitl the television set went off but, I pressed it until the end of the list and it never shut off. what can i do?

Posted on Apr 05, 2008

  • 51 Answers

SOURCE: Cracked Plasma screen

yes a plasma panel can be replaced but the cost on the panel is about 70% of the total sets price( not economical) and i dont think any manufacture or extended warranty will cover a repair like that its concider as a physical or cosmetic damage (sorry)

Posted on Jul 10, 2008

  • 1 Answer

SOURCE: Need code to operate Dynex Flatscreen TV on Verizon Fios

The code is 0490

Posted on Aug 03, 2008

  • 1 Answer

SOURCE: LG 42PB4D 42" Plasma TV

thanks, 11265 worked for me too

Posted on Feb 16, 2009

  • 1 Answer

SOURCE: Verizon FIOS remote buttons all work except

I had the same problem with a Sony Trinitron KV-32FS320 32" TV. I reset the remote to factory default.

  • Press and hold STB
  • While holding STB, press OK
  • Release both keys, wait for device keys to blink twice
  • Press 9-0-0. The STB key will blink three times
Then I reprogrammed the TV control.
  • Turn your television on
  • Press STB to enter Set Top Box mode
  • Press and hold TV
  • While holding TV, press OK
  • Release both keys, wait for device keys to blink twice
  • Press 1-1-2-7. This is one of the Sony TV codes
After this, the volume + and - worked to control the TV.
  • Program any other devices, such as DVD using procedure similar to above.
I hope this works for you.

Posted on Jun 29, 2009

  • 458 Answers

SOURCE: loud pop

If there was a loud pop then it would appaer a fuse has probably blown either on power supply especially if there is no indicator light showing. If you are getting the red stand by light then possibly a different fuse on the sustain board has blown. You would need to remove the rear cover & check any of the fuses. Most likely if they have blown something more serious has occured to cause & replacing the fuse will result in it blowing straight away.

Posted on Jul 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Viore 42" plasma tv has


The tv was working fine until this morning, then the picture went out but the sound is still working.
TV is only 3 years old, no real electrical problems

Jan 29, 2011 | Toymax Viore 42 in. Plasma TV

1 Answer

Rc65 directv remote can't sinc up with viore 37" lcd tv. remote codes listed online and with directv won't work


The maker of Viore is Akia. Try these codes:
Akai: 0057, 0087, 0699, 0729, 0839, 3002, 3182, 3219, 3247, 3248
Code 3219 worked for me and I have Verizon Fios.

Aug 14, 2010 | Flat Panel Televisions

2 Answers

Need Viore code for ATT-U-Verse remote.


I tried every code suggested for my Viore with Uverse and nothing worked. Finally decided to reset the remote to factory settings using code 900 as described in the instructions from ATT uverse. The remote now works on my Viore tv and all I did was reset the remote to factory settings.

May 17, 2010 | Toymax Viore 42 in. Plasma TV

1 Answer

Remote code


Contact them here:

Parts & Accessories
(remotes, cords, manuals, service parts etc.)
ico_mail.gif
accessories@viore.com

Oct 17, 2009 | Toymax Viore 42 in. Plasma TV

3 Answers

Have 40 inch Proscan TV. Am trying to program my Verizon (FIOS Service) Remote to recognize the TV. None of the numbers furnished by Verizon work. Proscan gave me some weird numbers that do not work...


You mostly have to go through all the numbers to find one that works. Sometimes, with an off brand TV I have the best plasma i've ever owned right now. It's not a fancy brand name and the remote ( Comcast ) wont work for it. The comcast guy said that it would not work with my TV. Hope ite helps. You may not be able to pair the two at all.

Jul 17, 2009 | Proscan 42LA30H 42 in. LCD Television

3 Answers

Cablevision remote won't work viore tv


I was able to program my viore tv by trying the code search:
1. Press the tv and sel buttons until the IO button turns red.
2. Press channel up or down until the tv turns off and the press the tv button to lock in the code.
Ps: Be pattient when searching for the code, it might take a while. HOPE THIS HELPS!!!!!!!!!!!!!!!!

Mar 09, 2009 | Toymax Viore 42 in. Plasma TV

2 Answers

Need code to program dish remote


the dish network code is in the cd that comes with the TV.

Jan 18, 2009 | LG 42LG70 42 in. LCD HDTV

3 Answers

Vx37l stopped working with FiOS remote


I read in another forum where Vizio sometimes uses Vidtech codes. I got 0205 to work on my new Vizio V037L with my Verizon FiOS remote (Phillips RC144).

Oct 02, 2008 | Vizio VX37L Television

2 Answers

Verizon remote won't work


I am a Verizon tech and the remotes we use work for Vizio sets just fine. If for some reason the remote wont work and he tried 3 different ones then it has to be your set. I set FIOS up all day and have no trouble with those TVs

Mar 09, 2008 | Vizio P2 42 in. HD-Ready Plasma Television

Not finding what you are looking for?
LG 42PX5D 42 in. Plasma HDTV Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Flat Panel Televisions Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

The Knight
The Knight

Level 3 Expert

68323 Answers

Are you a LG Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...