Question about Sony KP-46V35 TV
There is no image on the TV, the "stand by" light flashes making a clicking noice. TV sound is working. Any suggestion what the problem could be?
SOURCE: Sony Trinitron kv-32hs500
plug out the tv and let it stand for about 2hrs so that it can reset itself if that does not work take the set to a tech for repairs the problem is in the power supply and related circuits good luck.
Posted on Apr 02, 2007
This can be a symptom of the picture tube starting to fail or a power supply problem. Can you please verify the model number and I'll then be able to give you a few options.
Posted on Nov 11, 2008
have over 10 years experience in electronic tech
I know this isn't what you want to hear, but the problem you've described can't be fixed with troubleshooting. Your TV will have to be repaired. There is a part that has developed a defect and needs to be replaced. If you're still in warranty, the TV will be repaired at no charge to you. The warranty would likely be at least one year from the date of purchase from the manufacturer. If you purchased an extended service plan they will repair the TV at no charge as well.
If the TV is no longer in warranty, it will likely cost a minimum of $150 parts and labor. This is assuming that you only need one circuit board or small part. If the problem is more than one of the circuit boards, the price of repair could go much higher.
I hope I've provided you useful assistance and that this information allows you to make an informed decision as to how to proceed from here. Please be sure to vote on my response. I hope I've earned a good rating from you today.
Please let me know if I can be of further assistance.
Posted on Jul 11, 2009
WARNING- VOLTAGES STORED INSIDE YOUR TV CAN KILL YOU EVEN AFTER ITS BEEN UNPLUGGED FOR DAYS..your problem is in the zero cross detect circuit . youu should take it to a repair facility. -Or replace diode D647 . Or on remote in this order press "display -5- vol down - pwr ." and then you could watch it right now ..kinda
Posted on Oct 01, 2009
Testimonial: "Thanks for the amazingly quick response. This is very helpful information."
In sony tv`s the 4 blink code(sony error codes)usually means that there is a vertical deflection problem.
It is often caused by a faulty vertical output i.c and/or related components. If you feel handy with a soldering iron let me know and i`ll help you with it.
Hope this help Merry Christmas
Posted on Dec 17, 2009
Tips for a great answer:
May 25, 2014 | Sony FD Trinitron WEGA KV-36HS510 36" TV
Aug 19, 2011 | Sony FD Trinitron WEGA KV-34HS420 34" TV
May 29, 2011 | Sony FD Trinitron WEGA KV-13FS100 13" TV
Aug 06, 2010 | Sony FD Trinitron WEGA KV-32FS120 32" TV
Jul 31, 2009 | Sony FD Trinitron WEGA KV-32FS120 32" TV
Nov 29, 2008 | Sony FD Trinitron WEGA KV-34HS420 34" TV
Nov 01, 2008 | Sony FD Trinitron WEGA KV-32FS120 32" TV
Apr 09, 2008 | Sony FD Trinitron KV-28FQ75 28" TV
Oct 27, 2007 | Sony FD Trinitron WEGA KV-36XBR800 36" TV
57 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: