- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You will only get the calibration page no matter what you try because the printer needs to complete that task before it will let anything else get printed. This cannot be avoided for this model printer! Just follow the instructions as listed on the calibration page (even though you think it may not be needed) and then the printer will act normally!
try to do some print test page using you computer. If your using windows XP you can print a test page under control panel and printer and faxes, Just click the icon of your printer then properties. If the test page printed the test page it means computer is fined
Just check the settings of word document. make sure your printer is selected as default printer
You do not need to connect it to computer to print photos. the printer, place any document on the scanner glass and put papers in the document tray and press copy. if the printer does not work,
Call kodak @ 1800 421 6699 and they will replace the entire printer for you free of cost.The usb cable does not comes with the printer and you need to purchase it additionally
kodak has certain problems with esp-3 printers.
it cannot give u a cash refund
call kodak @ 1800 421 6699 . they will upgrade ur printer and give u a kodak esp-5.
they have been giving esp-5 lately in return for esp-3
open printer access door.remove printhead and cartridges again reseat both of them.. press copy $ cancel for 5 seconds and wait for caliberation sheet to print.. or if u have connected ur desktop, open kodak home center, go 2 maintenance and click on clean printhead. now see if ur documents are printing properly. if not kodak will replace ur printhead.
I can understand your concerns. Just try to copy a document from the printer , by placing it on the scanner glass of the printer and by pressing Copy on the printer.if it copies,that means the printer is working absolutely fine.As far as the printing from computer is concerned,i would recommend you to
Kindly go to control panel-add or remove programs and then remove bonjour,Kodak all in one printer software and microsoft.net framework
Go to start,go to run and type in "services.msc", without the quotes in the open box and press ok.
restart the following services by clicking on stop the service and start the service.
1. background intelligent transfer.
4. remote procedure call locator.
5. printer spooler.
make surethat they are set to automatic not manual.
install the latest version of Kodak software from www.kodak.com/go/downloads
Your issue will be fully resolved.