Question about Husqvarna Chain Saw 20" Bar

1 Answer

What is the fuel mixture (ratio) for a Husquavara Mdl 455 Chain Saw

Posted by on

  • Actuator Dec 21, 2008

    how do I set high and low mixture on Homelite 330

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

50 to1

Posted on Dec 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel mix


The oil ratio is 50:1
Here is the website: http://homeguides.sfgate.com/oil-fuel-mixture-farm-tough-husqvarna-chainsaw-83933.html What Is the Oil Fuel Mixture for Farm Tough Husqvarna Chainsaw

Aug 19, 2014 | Husqvarna Chain Saw Handle Models 362 365...

1 Answer

What is the gas / oil ratio mixture for husqvarna 455 rancher model ?


50:1 that's 2.6 ounces of 2-stroke oil (preferably with fuel stabilizer) to one gallon of gas. I recommend using 89 octane gasoline for all small engines. It has little or no ethanol in it, as opposed to the 10% typical in 87 or 86 octane fuel. This will prevent a lot of fuel issues, especially if you are not using the tool daily or at least weekly.

Aug 02, 2014 | Husqvarna "965030298 - 455 Rancher, 20""""...

1 Answer

What is the correct fuel/oil mixture for an older Eager ****** 16 inch chain saw?


It really depends on the model number of your Eager Beav er unit. Anything within the last 6 years is 50 to 1 older models can be anywhere from 25 to 1, to 32 - 1 up to 40 - 1. t all depends on the model number.

The usual fuel mixture is 40 - 1 or 3.2 oz. per gallon.

Your chain saw would have to be pre-1995 to use a mixture greater than 40-1. If your chain saw is other than that then use a 32 - 1 ratio. 4.oz per gal.

This is a great fuel mixture calculator:
http://www.csgnetwork.com/oilfuelcalc.html

If you know your model number you can use this page to get an owners / operators manual:
http://www.mccullochpower.com/node7877.aspx

Jun 16, 2011 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

1 Answer

What is the oil mixture for husqvarna chain model 235


50:1 fuel to oil ratio is correct for this saw. Be sure to use modern synthetic saw oil, not a petroleum product like outboard motor oil. Premix the fuel and oil in it's own can, and shake thoroughly just before filling the saw each time. With these modern fuel/oil ratios, serious engine damage can occur if not thoroughly mixed each time. Hope this helps!

Sep 05, 2010 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

2 Answers

Fuel mixture for MAC 3200 CHAIN SAW


Mix the oil to gas at a ratio of 50:1.The oil bottle will tell you how much oil and gas you need to get to that mixture.

May 11, 2010 | McCulloch 16 Inch Gas Chain Saw MCC1635AK

1 Answer

, No.455 Rancher, 20" Gas - Powered Chainsaw: What is the oil mixture ratio for the Rancher 455...


50: 1; You can download an OM here:
HusqvarnaUSA.com
http://www.husqvarna.com/us/homeowner/support/download-manuals/
Enter the 3 digit model number (no XPs, Es, just the numbers)
Serial number decode – useful when downloading IPLs and Manuals
06 1500198
06 = year produced – 2006 (single digit before 2000; please contact Husqvarna for single digit clarification http://www.husqvarna.com/us/homeowner/support/customer-support/)
15 = week produced – March
00198 = 198th unit Husky produced that week

Oil Mix Ratio:
The following ratios have been recommended for the last 10-15 years and is what Husky suggests for your saw..
Dolmar, Echo, Efco, Homelite, Husqvarna, Jonsered, Makita, Oleo-Mac, Red Max, Ryobi, Shindaiwa, Solo, Spear & Jackson, Stihl & Tanaka; all recommend 50:1.
1 gallon of premium fuel to 2.6 ounces of quality 2-cycle oil.
4 liters of premium fuel to 80 milliliters of quality 2-cycle oil.
McCulloch, Poulan & Wen; recommend 40:1.
1 gallon of premium fuel to 3.2 ounces of quality 2-cycle oil.
4 liters of premium fuel to 100 milliliters of quality 2-cycle oil.
Chinese chainsaws recommend 25:1.

If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.

May 10, 2010 | Husqvarna , No.455 Rancher, 20" Gas -...

2 Answers

My 455 starts good and idles fine but wont go wide open it boogs down and misses


Here are a few things to consider :
- fresh fuel ratio 40:1
-new spark plug
-choke not sticking
-air fuel mixture correct
-bar and chain oil tank full, oil getting on chain
-bar sprocket in good shape getting lubed.
Please let me know what you find.

Feb 11, 2010 | Husqvarna , No.455 Rancher, 20" Gas -...

1 Answer

Fuel Mixture Husqvarna 455 Rancher Chain Saw


Page 17 of your Operator's Manual says 50:1.


Fuel/Oil Mixture
  1. Use a quality 2 cycle oil and mix it to the OIL supplier's recommended ratio. Today I use Stihl 2 cycle oil mixed @ 50:1 in a Pioneer that I purchased new in 1980. There are no gouges or scratches on the piston or cylinder and I have no carbon build up on the piston top. The manual (on stone tablets) recommends 24:1. Over the years the mixture has leaned from 24:1 (Saw Recommendation) to 28:1 (Lawn boy mower recommendation) to 32:1 (Oil provider 8oz/2gal - used for many years) and finally the last 5 (±) years 50:1 (Stihl 2.6oz/1gal)
  2. Most gas in the US of A contains ethanol; not good with chainsaws. Mix what you expect to use within a few months. Anything over 6 months old use up in a 4 cycle engine. HTH
    Lou

Sep 25, 2009 | Husqvarna Craftsman 36cc, 16 In. Gas Chain...

Not finding what you are looking for?
Husqvarna Chain Saw 20" Bar Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Chainsaws Experts

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

375 Answers

Phil Walker
Phil Walker

Level 3 Expert

602 Answers

Are you a Husqvarna Chainsaw Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...