Question about Canon iPF700 InkJet Printer

1 Answer

Printer tells me the the print fixer cover is open and i need to restart. I have done this several time with no luck. Nothing is open. I have a Canon ipf700 large format printer.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 79 Answers

The fixer cover is the dig cyan cover. on the right side there is a sensor tha understand the cover, Check if the sensor is OK you have to loose some screws to see if its ok

Posted on Mar 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

PSC 2210xi All-In-One InkJet Printer: I have a HP 2210 xi all in one printer. it will n...


Try to go to manufactures website and download up to date drivers. Download/install and restart PC and then connect the printer. Good luck!

Apr 28, 2010 | Office Equipment & Supplies

2 Answers

Fuju Xerox C525a not printing right edge


Clean the inside of the printer using the cleaning rod. See page 48 of the user manual.
Open front cover,
Pull out lever on the right side. This opens the access window cover on the right side of the printer.
Inside this access window is the cleaning rod handle. Pull it out and push it back in several times to clean printer.
When done push the rod back in and push the lever on the front right panel back in. Close the front cover and you're done.
Do this every time you replace the black toner.

Jun 29, 2009 | Xerox DocuPrint C525A Laser Printer

1 Answer

My lexmark x1270 will not print from my laptop


it is probably the driver go to the lexmark web site and see if they have the drivers for vista hope this helps regards Jim

Apr 20, 2009 | Lexmark X1270 All-In-One InkJet Printer

2 Answers

"Turn Power Off then on Again" error


Try performing a reset on the device. Unplug the power cable, then hold # and 3 while powering it back up.

Aug 20, 2008 | HP Officejet Pro L7780 All-In-One InkJet...

2 Answers

Printer


just make sure that there's nothing under the cover where it 'snaps' back into place.

no worries, check for up to date printer drivers here

Feb 28, 2008 | Lexmark X3470 All-In-One InkJet Printer

5 Answers

Printer trouble


Hi,

Find this in the web

http://h10025.www1.hp.com/ewfrf/wc/document?cc=hk&docname=c00489814&dlc=en&lc=en&jumpid=reg_R1002_HKEN

Use the instructions below to resolve the issue by restarting the product.
  1. Disconnect the Universal Serial Bus (USB) cable from the back of the product, but leave the product turned on.
  2. Open the cover of the product and remove the print cartridges.
  3. Close the cover and wait for the Insert Ink Cartridges message to display.
  4. Disconnect the power cord from the back of the product and wait for one minute.
  5. Reconnect the power cord. If the product does not automatically turn on, press the Power button.
  6. Open the cover and reinsert the print cartridges.
  7. Close the cover. If prompted, print a calibration page.
  8. Reconnect the USB cable, and try to print a print job from the computer.

Nov 29, 2007 | Office Equipment & Supplies

1 Answer

HP1060 won't print


Have you looked at the front cover to see if the tab there is broken? (this will tell the PC that the front cover is still open) So you'll want to go around the edges of the printer cover to see if there's anything broken and a small hole in which the tab would insert into. If it is the case, and you don't want to spend money on fixing it, then do what I do...Rig up a paper clip and electrical tape to work as the tab, making the printer think that the front cover is always closed.

Mar 26, 2007 | HP LaserJet 1020 Printer

Not finding what you are looking for?
Canon iPF700 InkJet Printer Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

kakima

Level 3 Expert

98608 Answers

old marine
old marine

Level 3 Expert

1566 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...