Question about Sector Men's 270 Chronograph Alarm Black Dial Watch
I have sector 450, and i dont know how to use chrono alrm
SOURCE: SECTOR 450 TIME ABJUST
when looking at the face of the watch, the "dial" to the bottom-right is actually a screw-in, screw-out dial, it is not a push dial. Unscrew it until it is freed from the screw AND THEN pull it out two clicks, adjust time as needed...
Posted on Oct 22, 2008
Congrats on your purchace!! If you go to www.citizenwatch.com , click on which country you are in then click on the Find a watch link. After breaking down the category (eg. mens) they will show you a picture of many models. Click on your model to get more info...on that page should come up the link for Technical Info...click on that and on the right hand side is another menu saying "setting instructions" ....I personally like the interactive setting instructions. It leads you step by step through whatever you need to do and if you arent sure you can pause or re go over the step again.
Hope this helps.
Posted on Mar 14, 2009
SOURCE: Sector adv 1000 setting alarm
key for setting time can be pulled fully (to set time) or shortly (only 0.5-1 mm) for setting alarm. then you should turn it and watch how it moves (automatic, without your turning). when it comes to desired time just push key in. the watch will automatically rewind to present time and it will re-start running.
Posted on Apr 13, 2009
As there is no manual downloads possible for SECTOR watches, the only solution is to contact SECTOR directly. Of course you can browse all the internet, but I'm quite sure direct contact will save you nerves, time and money.
Here is the link:
Posted on Jul 22, 2009
Tips for a great answer:
Nov 28, 2010 | Watches
Aug 09, 2010 | Sector 550 Series Chronograph R3253993035...
Mar 27, 2010 | Watches
Jul 22, 2009 | Sector Watches
Jan 05, 2009 | Bulova Watch
Apr 21, 2008 | Sector 450 2653450035 Wrist Watch
211 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: