Question about Mitsubishi WD-62525 62" Rear Projection HDTV

1 Answer

WD62525 does not turnon - Lamp light on constant

I have a WD62525 thats about 3 years old. I have a yellow lamp lite thats been on for about 2 weeks but the TV was working. Turned the set off at night, the next morning the set would not come on. I replaced the lamp but the problem still exists. I've reset the set several times with no success. I've unplugged the set overnight and still the same problem when I plugged back it. I do hear the color wheel startup and stay spinning till I power off the unit. I'm suspecting the ballast my be my problem. Is there a way I can test this before ordering the unit?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,617 Answers

Its more likely that the Capacitors on the power pwb have failed You can get the V26 Power board repair kit at the following link which has instructions. That is the most probable fault on your model DLP when the lamp wont light. Heres the link its listed under their repair kit category.
http://servicemanuals.vstore.ca/

Posted on Dec 21, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When turned on the lamp led flashes, the bulb appears to lite up but the picture can take several minutes to come on then the set works fine until shut off. please any ideas ward


Hi,
If lamp has not been replaced in tv in last 2-3 years then it seems time to get it replace.
Lamp replacement procedure is easy and written in user manual of tv.
Thanks.

Jan 05, 2011 | Samsung HL-S5087W DLP TV

1 Answer

I have Mitsubishi WD62525 for the past 5 years. Last week the lamp light came on RED and I replaced it with a newer lamp and the TV still doesn't work. The RED light continues to stay on. Any ideas on what...


check to make sure the lamp cover is pressing the lamp switch in it is at bottom right corner of lamp panel, also make sure lamp is set in properly,another thing to check is the lamp cooling fan panel on right back side,remove and clean filter and replace

Nov 28, 2010 | Mitsubishi WD-62525 62" Rear Projection...

2 Answers

Vizio L32 stopped working.


I have seen this many times. The tv most likely has run its course. It could be the power supply or a lamp. Sounds more like a lamp, as you still have lights on your set. check around and get some prices on a lamp. you can have a local shop install it for you. or just replace the set.

May 03, 2010 | Vizio L32 32 in. LCD HDTV

1 Answer

I have a wd62525 the lamp light was amber, however I changed the lamp about 6 months ago and was told the timer just did not get reset so the lamp was fine. Now I turned on my set and the top of the screen...


Ur tv convergence are dead.U know how to solders?Must replaced 2 STK ICS and some or all it resistors.Tries Webstes Tv repair World.com,Tvrepairkits.com to buy a convergence kit to repair it ur self.The shop will cost U $300-350 for the parts and labors.

Apr 06, 2010 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Mitsubishi Proj. TV,Model VS-50603, S/N 119340, won't turn ''ON'' when pushing TV ''ON'' button or remote. Green ''ON'' light comes on and then immediately off. Whats the problem?


62" mitsuabishi WD62525 had it over 5yrs now, we have been changed lamps three times,(geee lots money!!!)it worked ontill now...
two weeks ago blinking red lamp light was on , i thought lights out again so soon, i order new lamp, i cant turn on TV but blinking green timer light, TV is not working, try reset botton, turn off TV few days.
Please help
Lilly

Dec 06, 2009 | Televison & Video

1 Answer

I have a philips dlp 55pl9773 has one red flashing led on the front when i do a hard reset tv boots up lamps lites led goes from flashing yellow to green for about ten seconds and then back to red flashing...


MY philips tv model number 55PL9773/17 WAS TURNING OFF THE SCREEN AND LEAVING THE AUDIO ON FOR ONE MINUTE. THEN THE YELLOW LIGHT STAYED ON. THEN THE LIGHT TURNED OFF. thEN I TURNED ON WITH THE REMOTE AND THE YELLOW LIGHT TURNED ON AND A FEW SECONDS LATER CHANGED TO THE GREEN LIGHT AND THE TV TURNED ON. AFTER A FEW MINUTES, BETWEEN 10 AND 30 IT DID THE SAME THING. NOW IT IS OFF WITH A BLINKING RED LIGHT PERMANENTLY ON. TO TURN IT OFF I HAVE TO UNPLUG IT FROM THE WALL. I REPLACE THE LAMP A FEW WEEKS AGO AND IT IS FINE.

Dec 01, 2009 | Philips 55PL9773 55" Rear Projection...

1 Answer

TV screen goes black, 43 lites appear and TV shuts off after 2 to 3 hrs of operation. It will restart OK however. 56" set is 4 yrs old, orig lamp in TV


If you have never replaced the lamp it is most likely to be the problem.Most lamps last 2-3 years under normal use.

Nov 22, 2009 | Samsung DLP HL-P5663W 56" TV

1 Answer

Red lamp lite flashes along with power light.......


That is definitely the Light Engine (also referred to as an optical block) Very expensive.

Dec 31, 2008 | Sony KDF-E55A20 55 in. LCD Television

4 Answers

Samsung hl-r5067w 50" DLP no picture


I have a solution for The United States of America! "If We Don't Make It, We Don't Need It".

Personally, I believe if we went back to actually manufacturing things in this country and stopped importing everything, a lot of these problems would STOP!

Think about it America!

Oct 19, 2008 | Samsung DLP HL-P5663W 56" TV

2 Answers

TV doesn't turn on


You really should give make & model number when posting, it helps us immensely, your lamp and possibly the ballast is bad, start with a new lamp first, odds are very good that it will fix your problem, can`t help more without manufacturer and model number, good luck, ps, order the original lamp, generics are junk and a waste of your money.

Nov 27, 2007 | Televison & Video

Not finding what you are looking for?
Mitsubishi WD-62525 62" Rear Projection HDTV Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1229 Answers

The Knight
The Knight

Level 3 Expert

75774 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...