Question about Hitachi FDX Series 43FDX10B 43" Rear Projection Television

1 Answer

Hitachi volume bar always on, remote doesn't work

8 years old. Get picture but volume bar always displayed at 0. Can get it to run up but then runs down. Remote no longer works. Panel buttons don't work except off and channel, input doesnt but effects volume bar which again goes back to zero.

Four hour unplug doesn't change anything.

Posted by on

  • Pennydog Dec 30, 2008

    Exactly the issue. Seems my sons friends gave it a beer to drink. Cleaned up its face nicely but the control panel was completely corroded. Nice call!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 141 Answers

You can start by opening the front panel and check if the control board (with channel ,volume ) is correctly fixed or need to be solded.
the service manual is here in 6 parts and for free...:
http://www.eserviceinfo.com/downloadsm/31328/Hitachi_43FDX10B.html
cheers

Posted on Dec 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

My volume display stays on


Hi,

The Tv needs to be serviced by a technician.Probably there is a problem with the circuits inside.

Apr 12, 2008 | Projection Televisions

2 Answers

Replaced main bulb in front but lamp button on front of tv is still blinking and tv won't show picture


The lamp timer on the Hitachi projector must be reset whenever the lamp has been replaced. The "Lamp" indicator on the display will light red or the "Change the Lamp" message will display when the lamp timer needs to be reset. Hitachi recommends that the lamp timer never be reset without replacing the lamp and to always reset the timer when the lamp is replaced. The message functions of the projector will not function properly if the lamp timer is not correctly reset.

  • Turn the power on. Press the "Reset" button for three seconds until the "Lamp xxxx hr" message appears on the lamp timer on the bottom of the screen.

  • 2

    Press the "Menu" button on the remote control while the lamp timer is displayed.

  • 3

    Press the left arrow button. Select "0" and wait until the timer display clears.


  • If this was helpful a vote on the thumbs up for the free advoce would be greatly appreciated. Thanks

    Apr 04, 2011 | Hitachi 60V500 60" Rear Projection...

    1 Answer

    Have an Hitachi 60sx12b. the sound meter bar stays on. can manually adjust the sound up but will go back down to 0. tv remote or sat. remote doesn't work at all. Please help


    Hi,
    It sounds either volume down button is bad that turns volume down on its own or system control chip got defective and decreasing volume level.
    Press volume down button on tv front and check is it working properly.
    Let me know to find out further info to solve the issue.
    Thanks.

    Jun 05, 2010 | Hitachi Projection Televisions

    1 Answer

    What is the life expectancy of the Hitachi 51F500


    5-10YEARS. THAT TV SOLD FRO 999.00 AT ITS END RUN SO YOU MIGHT WANT TO THINK ABOUT REPLACING IT

    May 21, 2009 | Hitachi 51F500 51" Rear Projection...

    1 Answer

    Mitsubishi ws65711-Volume bar always displays/remote not working


    Just solved my problem. Found out that the down volume button must have been sticking. Tapped on it a number of times and finally the volume bar went off and then the up volume worked fine. Looks like the down volume button on front panel is intermittently getting stuck. This happened last year but went away before I could figure it out. Maybe going to try and blow some compressed air in button socket.

    Jan 25, 2009 | Mitsubishi WS-65711 65" Rear Projection...

    1 Answer

    46 in hitachi projection screen -15 years old-won't turn on


    Good Day;
    If you don't hear the relay click suspect Q003. No power suspect Q912, Q914 & I901. Good Luck, big IRISH.

    Aug 01, 2008 | Hitachi 43UWX10B 43" Rear Projection...

    1 Answer

    HCM4215W 42 in. Rear Projection Television


    When the screen goes blank, hit any remote function that will show up on the screen-like volume bar. If the display is missing as well, then you have a tv problem. If the volume display is there when the tv picture is not, you may require a software upgrade.

    Mar 06, 2008 | Samsung HCM4215W 42" Rear Projection...

    1 Answer

    No picture for 3-4 minutes after start up


    Roger,
    Could be as simple as a software upgrade if the picture looks okay after it come on... What software version are you currently running?
    SOFTWARE VERSION CHECK Step (1) Turn the TV ON. Step (2) Using the TV Remote, Select Antenna C. Step (3) Press the MENU button on the Remote. Step (4) Menu will appear
    mmc-fig_7.gif
    (Figure 1)
    Step (5) Press the Cursor Down button and Highlight SETUP
    mmc-fig_9.gif
    (Figure 2)
    Step (6) Press SELECT on the Remote Control. Setup Menu will appear
    mmc-fig_10.gif
    (Figure 3)
    Step (7) Cursor Down and highlight UPGRADES
    mmc-fig_11.gif
    (Figure 4)
    Step (8) Press the SELECT button on Remote Control. Upgrades Menu will appear
    mmc-fig_8.gif
    (Figure 5)
    Step (9) Read the Software Version
    software-version-check.gif (Figure 6)


    Let me know!
    Bill

    Dec 12, 2007 | Hitachi 53SDX01B 53" Rear Projection...

    Not finding what you are looking for?
    Hitachi FDX Series 43FDX10B 43" Rear Projection Television Logo

    78 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hitachi Projection Televisions Experts

    Jaime Hernandez

    Level 3 Expert

    2267 Answers

    matt martin
    matt martin

    Level 3 Expert

    1191 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17129 Answers

    Are you a Hitachi Projection Television Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...