Question about Garden

1 Answer

Ariens 926LE snowblower won't engage forward or backwards. Running fine

Posted by on

  • Anonymous Mar 22, 2014

    machine is 19 years old

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 70 Answers

First thing I would check is to make sure the traction drive belt didn't fall off or break. To do this remove the plastic shroud between the engine and the snow chute. The traction belt is the one closest to the engine.If it isn't broke Make sure it is on the upper and lower pulleys.

Posted on Dec 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1966 ariens snowblower will not stop moving forward when handle clutch disengaged


Hi, you may need a new clutch cable as cables stretch through use .

Jan 15, 2016 | Ariens Garden

1 Answer

Fix ariens snowblower 520 dies when engaging the auger lever


Your front end is jammed. Its either frozen or there is a rock or something jamming it up. Before you start engine reach down chute and turn back impeller that throws the snow out of blower. Should turn freely. when its free its fixed. You will probably need a new belt.

Feb 17, 2014 | Garden

1 Answer

Ariens snowblower impeller not throwing snow


Sounds like you have a broken or partially broken shear pin in the auger.Check along the auger[machine off]and see if there is what looks like a bolt anywhere along the auger shaft.If there is [and there will be] remove and inspect it and you will see why the auger is not working.Next time,never clean out a chute or auger while the engine is running,people loose limbs this way.

Feb 13, 2010 | Ariens 34 In. Zoom Series Riding Mower

1 Answer

Not sure, but i think the electronic clutch is not engaging when i push the control levers forward or backwards. the engine and the mower deck both run, but the mower will not move


The electric clutch is to power the blades/mower deck. There is a belt that drives the hydrostatic pumps to power the wheels. Make sure the Parking brake is OFF. Could be a belt, spring, idler pulley.

Nov 19, 2009 | Ariens 34 In. Zoom Series Riding Mower

1 Answer

How do I change ariens snowblower belts


on some blowers you have to remove the front auger sya in order to change the belt. it a pain. look down from the top to see if you have room to slid the belts throw, if not remove the front auger

Oct 12, 2009 | Ariens Garden

1 Answer

Need manual


my ariens mower won't go forwards or backwards

Feb 04, 2009 | Ariens Garden

3 Answers

Ariens Snowblower won't engage into drive


I had the same problem with my 5HP Dual stage (C950-520240) Canadian model and found that the arm connected to the traction cable (part #85449 "Shaft Traction Clutch") which forces the friction disk up to the rubber friction wheel had a cracked weld and had bent, preventing positive contact with the rubber friction wheel. The drive wheels would turn if you lifted the back of the machine off the ground, but would not work if under load. First I replaced the belt and rubber friction wheel, but no go. I had to basically disassemble the whole drive assembly to find the problem, very frustrating because you could not see the crack in the arm from head on. I had the cracked and bent arm straightened and welded, all is OK now. enb54.jpg

Dec 05, 2008 | Ariens 34 In. Zoom Series Riding Mower

Not finding what you are looking for?
Garden Logo

Related Topics:

678 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

EugenesDIYDen
EugenesDIYDen

Level 3 Expert

479 Answers

Dennis Key
Dennis Key

Level 3 Expert

2458 Answers

john h

Level 3 Expert

7409 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...