Question about Belling XOU252 Electric Single Oven

Open Question

Belling Platinum db3 main oven will not heat when fan is on.

The main oven will not heat when fan is on however if I set it to no fan then it heats up. The fan and the grill also works normally. Is there seperate elements for when the fan is being used or do I have a switch problem..

Posted by on

4 Suggested Answers

  • 139 Answers

SOURCE: belling db3 oven

yes its most likely the element they are common in burning out ....because the fans still running,

Posted on Dec 17, 2007

  • 1 Answer

SOURCE: belling synergie. oven

if its flashing auto.
Press and hold the 2 buttons on the left hand - clock and cook time and then press the + button.
This then sets the time to allow manual and takes the auto off.

cheers

will

Posted on Aug 19, 2008

barkencoa
  • 3463 Answers

SOURCE: My Belling oven has no heat, but the fan &

If the fan is working o/k, then there is little doubt that the oven element has failed.
This is quite common with fan assisted ovens.
The element is usually located at the rear of the oven compartment behind a removeable cover.

Posted on Mar 29, 2010

Testimonial: "Thanks "

barkencoa
  • 3463 Answers

SOURCE: fan and grill works, grill actually cooks but oven

Without a doubt this is the element that is faulty.
It is located at the rear of the inner oven compartment behind a removeable cover.

Posted on Mar 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Common faults Belling XOU252


For all Free appliance repair videos visit our VIDEO TUTORIALS
1, If the Belling fan motor in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
To gain access to the BELLING element you will have to remove the back plate from inside the oven. Once removed you will see the fan and element, if you look closely at the element you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.
2, If your BELLING fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your BELLING oven thermostat
4, A quite common and easily overlooked answer is if your BELLING oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.

on Jan 17, 2010 | Belling XOU252 Electric Single Oven

Tip

Common faults on belling cookers


For all Free appliance repair videos visit our VIDEO TUTORIALS 1, If the Belling fan motor in the back of the oven is going round and the temperature light is on (normally little red light), but there is no heat then you will probably need a new oven element, these are generally very easy to fit and readily available from our website these can be tested with a electric meter.
To gain access to the BELLING element you will have to remove the back plate from inside the oven. Once removed you will see the fan and element, if you look closely at the element you will probably see a small hole burnt in it where it has blown. Sometimes however there is no evidence of a fault but the element is open circuit ie: broken inside the element casing, either way it will need replacing. Some elements will are fixed from inside the oven and some are held in place by nuts from the rear of the machine.
2, If your BELLING fan oven is getting warm but takes a very long time to cook or is burning the food more on one side than the other, then you need to check if your oven fan motor is working you will see the blade turning fast if it is ok. if the element is heating but the fan motor is not blowing the heat into the oven then you need To replace the oven fan motor is a little more expensive and a bit more involved.
3. If you have the opposite problem ie: your oven is over heating and burning everything then you will need to replace your BELLING oven thermostat
4, A quite common and easily overlooked answer is if your BELLING oven is not working at all ie: no heat and no fan then the chances are that someone has put the oven timer into AUTO mode, simply put oven back to MANUAL mode and all should be working again.

on Jan 17, 2010 | Belling XOU592 / XOU593 Electric Double...

1 Answer

My Belling oven has no heat, but the fan &


If the fan is working o/k, then there is little doubt that the oven element has failed.
This is quite common with fan assisted ovens.
The element is usually located at the rear of the oven compartment behind a removeable cover.

Mar 29, 2010 | Belling XOU252 Electric Single Oven

1 Answer

Fan oven wont heat up


If fan is workintg, but no heat, then replace oven element.
If no heat or fan, then make sure timer is set on manual and not on auto
Please rate my solution.
Thanks.

Apr 05, 2009 | Belling XOU252 Electric Single Oven

1 Answer

Fan is running fine but main oven does not heat up


It is most likely the element they are very cheap on line ,

Sep 11, 2008 | Belling XOU592 / XOU593 Electric Double...

1 Answer

Belling no heat in main oven


You need a new element buy on line much cheaper,

Jul 23, 2008 | Belling XOU592 / XOU593 Electric Double...

1 Answer

Belling db3 oven


yes its most likely the element they are common in burning out ....because the fans still running,

Dec 17, 2007 | Ovens

Not finding what you are looking for?
Belling XOU252 Electric Single Oven Logo

Related Topics:

97 people viewed this question

Ask a Question

Usually answered in minutes!

Top Belling Ovens Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

bosch5

Level 2 Expert

157 Answers

Chris Hall
Chris Hall

Level 3 Expert

842 Answers

Are you a Belling Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...