Question about Pioneer Audio & Video Receivers

Open Question

Pioneer PL 112D turntable running slow - Pioneer Audio & Video Receivers

Posted by on

3 Suggested Answers

  • 45 Answers

SOURCE: Pioneer turntable Pl-560 and Pioneer Receiver VSX-D409

No phono inputs?? You will need a phono to line level preamp to use aux input.

Posted on Nov 05, 2007

  • 105 Answers

SOURCE: motor for pioneer Pl 120 turntable

Start with eBay, craigslist.org, perhaps local Goodwill store. It might be easier to just by another turntable that is not in fantastic shape but has a working motor...then swap.

Posted on Mar 28, 2008

  • 2 Answers

SOURCE: Pioneer PL-300 Turntable plays records

No, I have a PL-300 and its directly driven by a DC motor. I have taken mine apart to clean once before and noticed some potentiometers on the bottom. (There are holes on the bottom of the plastic casing for easy access using a small flathead screwdriver) Those might be to adjust speed. They could also be for tone though... It might also be that the electronic quartz-based speed controller is broken. With these old things its never easy to tell whats wrong.

Posted on Jun 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I don't know what needle is needed for my pioneer turntable PL-X88Z?


You just need to look at the cartridge and look for the make and model number. Once you have that you can search Google for it and the stylus will also show up.

Sep 26, 2013 | Pioneer Audio & Video Receivers

1 Answer

I would like to set up my old Pioneer PL-514 turntable and my Pioneer SX-550 sterio reciever to listen to some old LPs. I seem to have lost the instructions and connection diagrams. Could you please...


http://www.vinylengine.com/library/pioneer/pl-514.shtml
http://www.hifiengine.com/manuals/pioneer/sx-550.shtml
The upper link is for the turntable, the lower is for the receiver. they want you to create an account tu dowlnload so just create an account with them. In my expierience turntables had hook upeads out the back(wires connected) that would hook to phono in on receiver and speakers would hook to receiver via speaker wires(may not be included) by pos and neg. The speaker wire usually either has a rib or a line or writing on on leg so you can identify which wire you would want to be pos or neg.

Mar 10, 2011 | Pioneer Audio & Video Receivers

1 Answer

I have a Pioneer PL-S50 turntable that I want to connect


hi you need a Phono Input Attenuator Line Adapter
the above link is for one on ebay but they are also available through radio shack



Jan 06, 2010 | Denon AVR-689 Receiver

2 Answers

My record player works but makes an aweful noise like the turntable in rubbing up against somethin


If it is a loud hum besure there is a ground wire connected to the back of the receiver from the turntable.

Apr 24, 2009 | Audio & Video Receivers

1 Answer

Pioneer PL-670 record rejects continually


Are the record size tabs sticking up through the turntable platter cover? They sense the size of the record being played and adjust the run out distance for either 45 or 33 rpm records.

Jan 04, 2009 | Audio & Video Receivers

1 Answer

My pioneer turntable pl 233 not been used for years. Despite new belt, keeps slowing on playback. Does it need motor lubricant?


Hello, You need to remove the platter\ remove the old bearing grease\ re-lube platter bearing with new 30w motor oil. Good luck

Dec 10, 2008 | Audio & Video Receivers

2 Answers

Pioneer pl 50 turntable it is turning too fast ,there is no adjustment.Is there a solution


I brought my turntable in a repair shop. Don`t know if it will be fixed. If not ,I will use your technical support. thank you Alain

Oct 14, 2008 | Pioneer Audio & Video Receivers

3 Answers

Motor for pioneer Pl 120 turntable


There are only three possibilities:
1) Find a scrap unit somewhere and salvage the motor.
2) Find an old Pioneer dealer that still has old stock lying around.
3) Get lucky and find one on Ebay.

Dan

Mar 28, 2008 | Audio & Video Receivers

2 Answers

Pioneer turntable Pl-560 and Pioneer Receiver VSX-D409


No phono inputs?? You will need a phono to line level preamp to use aux input.

Nov 03, 2007 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Audio & Video Receivers Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Pioneer Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...