Question about Computers & Internet

1 Answer

Display off my computer can't on last few days,then I switch on and restart,I did it last week then it's on. now the hard disc light showing it's working but dis play not working. first dos screen coming then off. my mother bord is GIGA BITE , VGA card is G- FORCE . I disconnect G-FORCE card and fix to the mother board but still same problem

Posted by on

  • Azrul Syahriman
    Azrul Syahriman May 11, 2010

    Is the monitor in stand by mode?

  • Jarish Castañeda
    Jarish Castañeda May 11, 2010

    Have you tried installing your Graphics card to other computers?


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

Boot into safemode. push F8 on startup until safemode option appears. If computer displays windows there, then it's most likley your resolution or your monitor frequenzy set to high/low.
change the resolution in safe mode, and the the frequenzy to 65 then restart your computer in normal mode.

Posted on Dec 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Compaq presario f700 model laptop computer that was working fine until last week now what happens is when I turn it on I get the hp logo on screen long time then it disapears and the screen...


Try to clean the Hard disc connector on your laptop motherboard or Sata controller if you are using sata hard disc. There is loose contact there try to clean it with a piece of paper.

Jul 19, 2011 | Compaq Computers & Internet

1 Answer

I have a IIIWoods timer #59203WV and have trouble programming it to turn on and off exterior lights. Thanks for your response.


Manual:
http://waterheatertimer.org/pdf/Woods-59203.pdf
59203 plug-in timer: your outdoor lights have to plug into side of timer.

If you want a timer to replace outdoor light switch: buy in-wall timer Aube T1032 or Lowes sells Utilitec 0192773.
http://waterheatertimer.org/Programmable.html#Aube
Add a comment for more help with in-wall.

Here are instructions for 59203 plug-in timer:
Plug in the timer until battery is charged.
Unplug timer so you can program easily.
Press R reset button with paper clip to clear.

Set the time of day:
Press and hold clock button
Press hour button until current hour shows
Press minute button until current minute shows
Press day button until current day shows.
Release clock button

Program review:
Write out ON-off schedule showing hours minutes and days
For example: timer turns ON 6:00 pm all days of week.
Timer turns OFF 1:00 am all days of week.
First step: Set program1 ON > hour, minute, and day.
Next step: Set program1 OFF > hour, minute, and day

If needed, go to next step: Set program2 ON > hour, minute, and day
Next: Set program2 OFF > hour, minute, and day

How to program timer for ON at 6:00 pm and OFF at 1:00 am all days of week:
Step 1: Press PROGRAM button until display shows 1 ON (this is program1 ON)
Press hour button until 6 pm shows
Press minute button until :00 shows
Press day button until all days of week show (MO TU WE TH FR SA SU)

Step 2: Press PROGRAM button until display shows 1 OFF (this is program1 OFF)
Press hour button until 1 am shows
Press minute button until :00 shows
Press day button until all days of week show (MO TU WE TH FR SA SU)

If you want to set another program, you will repeat same steps for program2
Press PROGRAM button until display shows 2 ON

If you are done programming, press clock button
Press ON/AUTO/OFF button until AUTO displays


geno_3245_63.jpg

Nov 13, 2010 | Woods INDUSTRIES 83660 OUTDOOR SECURITY...

1 Answer

My Western Digital 520 MB portable hard drive is not showing up on my mac. I see its white light blipping constantly but it is not appearing on my computer. It worked a few times the past few days but it...


Try reformatting the drive. In Mac OSX go to the utilities Folder open up Disk Utility. In left hand window of the page you will see your drive. Highlight it. At top of page click on Erase. In Format drop down window select Mac OS Extended (Journaled). In window below format give your disk a name. At bottom of page click Erase.
After you have erased and reformatted click on First Aid at top of page. In First Aid highlight your disc and click on Repair Disc at bottom right hand of page. after Disc Repair try using it again and see if that works.
If it doesn't work repeat the above steps And if the doesn't work try another disc or go for a long walk and breath deeply.

Aug 30, 2010 | Western Digital My Book Home Edition 500...

1 Answer

Clear pasword and boot block recovery problem


At the bottom of your motherboard there should be a 4 pin stand with a jumper on only two of the pins.Move the jumper to the remaining two pins and reboot.

Oct 11, 2009 | Intel Motherboard

1 Answer

Cannot turn on the numeric keypad, even after pressing NumLock


ya !! you can try more to remove keyboard then again pluged in USB.and restart the system..may be it will wrk.... or u can try more to restore computer system....

Mar 23, 2009 | HP Internet Keyboard

4 Answers

Western Digital hard drive problem


Ok.  I have a WD 500 and I have ran into similar problems.  First, shut your computer down.  Unplug the hard drives USB cable and the power cable.  Wait for about 2 minutes.  Plug the USB cable into the computer, plug the power cord in...wait for 30-45 seconds and then start your computer.  That hopefully should solve your issues.

Mar 01, 2009 | Western Digital My Book Essential Edition...

1 Answer

"cloclwork" restart


Check to see if its over heating. That could cause it. Is there any other errors it displays? And when does it display that error before it restarts or after?

Oct 03, 2008 | Compaq Presario 5000 PC Desktop

1 Answer

A few unreadable disc errors, some freezing, then no picture.


Rats. Sorry to hear that. If your Xbox360 is still under warranty then you can call 1-800-4MY-XBOX and arrange to have it fixed.

This is a common problem and some people even choose to replace the DVD drive to reduce the noise while the console is operating.

Here's a link to help identify what drive you have in your console now: http://llamma.com/xbox360/Xbox_360_DVD_Drive_Comparison.htm

Here's another user's story of how he solved a similar problem:
http://forums.xbox-scene.com/lofiversion/index.php/t533388.html

Here's a place to buy a replacement drive:
http://www.etech4sale.com/Philips_VAD6037_21_Xbox_360_Replacement/VAD6037_21/partinfo-id-213036.html

And lastly here's a tutorial with more details:
http://www.llamma.com/xbox/Repairs/xbox_dvd_repair.htm

Dec 19, 2007 | Microsoft Xbox 360 Console

2 Answers

Text Display Memory


I am facing the same problem! By all means get it repaired. You can find the nearest Pioneer warranty station by calling 800-421-1404. You will need a copy of the purchase receipt when you bring it in for ervice. My story: I got it for a gif last Christmas, and after I had it for a month, it lost it's memory. (title index) So I called up Pioneer corp on the phone and this dude said make sure you don't have it hooked up to a switched AC. and I did, so I corrected that and he said use the remote to shut the unit off, oh by the way the remote sucks...!!!! but the memory is only lasting about three weeks or so. and it takes hours to put the cd's in memory. Anyway, i am on the way to ask for service...

Oct 10, 2005 | Pioneer PD-F1007 301-Disc CD Changer

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...