Question about Sanyo Car Audio & Video

Open Question

Lost the manual for Sanyo FXD RS 50 car cd player

Trying to install it in our new car but unable to get power supply, is there somewhere I can get a manual online at no cost?

Posted by on

5 Suggested Answers

SOURCE: car stereo sanyo fxd mp690

I have not had to use a code when battery disconnected from CD, just had to retune station memories when reconnected.

Posted on Jul 19, 2008

  • 1 Answer

SOURCE: I lost my installation cd

Where can I go online for an installation disk for a e250 sansa player

Posted on Aug 28, 2008

  • 30 Answers

SOURCE: power supply is bad on philips plasma 50 inch tv, it just clicks

nice job... thats the most common problem with all LCD tv's now

Posted on Jul 21, 2009

  • 78 Answers

SOURCE: lost installation cd for sylvania smpk8854b mp3 player

i have all of it on file do you still need it?

Posted on Jul 29, 2009

  • 1274 Answers

SOURCE: Sanyo FXD-MP690R Manual I cant find a manual for

You can get one,even by email,at World car audio schematic diagram and manuals. ...hope this helps you some...

Posted on Mar 02, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Sanyo FXD-MP690R Manual I cant find a manual for this car radio and the only one we have is in spanish

You can get one,even by email,at World car audio schematic diagram and manuals. ...hope this helps you some...

Mar 02, 2010 | Car Audio & Video

1 Answer

Unable to store a radio station. When i switch cd player off and on again stations are lost.

Check power wires for blown fuse. Should have 2 (minimum) and one is main power, other is for memory.

Feb 20, 2010 | Kenwood Car Audio & Video

1 Answer

I need a radio wiring diagram for a 1985 Chevy C10 Silverado. I'm trying to install a brand new cd player and i just need to know where each wire connects. The new cd player conviently has the names on...

the norm is
you will need a volt meter and a 9v battery,
test all wires with meter to find a live with the ign switched off, ths is the live memory feed
the try again with the ign on, this is the switched live
there will be an earth/ground and light feed when you power the lights on.
when you do that to find the speakers
take a pair of remaining wires and place them on the 9v battery, work through the wires til you here a speeaker crakle, then continue till you find all speaker, that will allow you to hook up to a aftermarket unit,
or if you can get to a scrap car of the same year and type, cut the harness out and match up the wires :)

Dec 26, 2009 | Car Audio & Video

1 Answer

Need to know how to set and hold radio stations on a fxd 615 sanyo car radio. will not come on when ignition turned on. when turned on and set channels will not hold

depending on what system you have, all that needs to be done is to select station required and then press and hold a preset button 1-6 for around 2 to 3 seconds and that should store that station

Jun 13, 2009 | Sanyo Car Audio & Video

1 Answer

Gauges dont work after new cd player install

you will have to go to the gm garage and ask for the wiring diagram to match the wires up. but the way to fix it the right way is to go to the junk yard and cut the harness out of a car and splice the wires back together then go to wall mart or best buy to get the right wiring adapter then you can match them colors up to your new radios wires and plug into your car

Mar 09, 2009 | Buck Oldsmobile Intrigue 1999 Radio...

1 Answer

Cd wont eject

You are absolutely right about bose! And GM Delco as well. Try this. I've had 50/50 results. Need 2 peole. One at the nattery, the other at the cd player. Turn the key on, radio will power up. with the radi powered up,disconnect the negative battery cable from veicle. Wait a few minutes. Now this step might be cumbersome. While holding stereo in your hand, push the eject button and HOLD while the other person re-connects the negative power cable back up. Ths will do a reset on the stereo and you may get lucky!

Don't put anymore cd' in it. Your only other option if you want that CD bad enough is to disassemble the case of the stereo and manually move the mechanism to eject it. Hope this helps

Larry T
Winona Lake, IN

Jan 27, 2009 | Car Audio & Video

1 Answer

Installed a cd player into car and now having porblems

It sounds like you have the red or yellow wire hooked up to your illumination or dimmer. check those two first. Yellow is constant 12V and red is accessory (switched) 12V.

Jan 03, 2009 | Car Audio & Video

1 Answer

Unlock JVC 421 ipod player car C.D player

Yes you do and the dealer should be able to give it to you ,I would urge you to go get your manual back from Halfords !

Dec 06, 2008 | Car Audio & Video

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo Car Audio & Video Experts


Level 3 Expert

66902 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

xxxxxx xxx

Level 3 Expert

4748 Answers

Are you a Sanyo Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides