Question about Apple iPod nano 2nd Generation MP3 Player

2 Answers

Forgot screen unlock code black apple ipod model no a1136 My ipod is locked and i forgot the code

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

For those forgetful people

all right guys i have a solution for this but it will require some work first:

  • Mount the nano (plug it in)
  • Navigate to X:\iPod_Control\Device\ (where X is the drive letter of the iPod)
  • Find the file called "_locked" and open it with Notepad or TextEdit
now u should get some thing like : Vôáijåö\féúPbíþT~ñâHzõæLvùê@rýîD as the text but its not that con fusing to show here are two diffrent codes

Vôáijåö\féúPbíþT~ñâHzõæLvùê@rýîD
the same!
]óãhjåö\féúPbíþT~ñâHzõæLvùê@rýîD
so in fact the part that matters is the first 4.... and its a 4 digit code!!

soooo i have made a guide line.. for u to match up your code with

0000
^ðàk
1111
_ñáj

2222
\òâi

3333
]óãh

4444
Zôäo

5555
[õån

6666
Xöæm

7777
Y×çl

8888
Vøèc

9999
Wùéb
now how does this help ?? well i set my code as 1234 and this is what the first 4 digits were: _òão

if u look at the first one and compare to the guide it shows that the first digit is 1 the second 2 the third 3 and the last is 4! taaa daaaa!!!!

Rock on people hope this helps!!!!

~Thimolas the awesome :P

oppps!! forgot to mention that eagle btc helped me find the folder...... the little bit at the begining was from

http://forums.ilounge.com/showthread.php?s=&threadid=118446&highlight=combination+lock

Posted on Mar 11, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 146 Answers

Apple support gives these 2 solutions:

Connect your iPod to the primary computer you use it with (the first one iPod synced with), and open iTunes. When you disconnect iPod from the computer, it will no longer be locked.

If you can't unlock iPod using either the code or connecting it to the computer you use to manage its songs. . . you can restore your iPod to factory settings using iPod Updater. Please note that this will erase all data on your iPod. Afterwards, you can add your music and data back to your iPod.

Cheers

Posted on Jan 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want to download certain songs to my new Ipod shuffle. I do not want to download everthing Is there a way to choose which songs you want to put on your ipod?


The only songs you can download have to come from the iTunes store. Set up an account with a credit card, and you can order single songs, albums or videos, plus some free content. Some albums are sold as whole albums, but that is not the norm.

If you have music on your computer, you can download iTunes to it, and try and drag tracks by having the iTunes window open to your iPod, and the other pane open to your music. Highlight and Right Click Drag - Copy here.

The legit way is to pay Apple $38 to allow you to put non iTunes music on their device.

Jan 10, 2017 | Apple iPod Audio Players & Recorders

1 Answer

T612 Altec Lansing ipod player. The connector where the ipod sits is loose. Ipod wont stay.


The connector needs refitting , screwing in or replacing.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 06, 2017 | The Audio Players & Recorders

1 Answer

Hi I have an apple ipod model A1285 I loaded music but i cant play it. The play list shows 0. Can you please assist.


may want to check the library in iTunes to make sure the files are there on your hard drive and on your iPod if the problem persists clear your library and make iTunes find your music in your hard drive again and try placing the music onto the device once more

Jan 06, 2017 | Apple A1285 Nano 8Gb 4Gen Personal Mp3...

1 Answer

I cant get in ipod


http://support.apple.com/kb/ht1212

Mar 24, 2014 | Audio Players & Recorders

1 Answer

How to reset my combination lock number on ipod A1236


Hi William
If you have forgotten the code or put the wrong code in your ipod, you can unlock the Ipod by doing the following:
Connect your IPod to the primary computer you use it with (the first one Ipod synced with), and open iTunes.
When you disconnect iPod from the computer, it will no longer be locked.
If you can't unlock Ipod using either (the code or connecting it to the computer you use to manage its songs). . . you can restore your ipod to factory settings using ipod Updater.
Please note that this will erase all data on your ipod.
Afterwards, you can add your music and data back to your ipod.
If you want to change the primary computer that your Ipod is associated with, do this:
1. Restore your iPod. WARNING: The restore process cannot be undone.
All of your songs and files will be deleted.
Always make a backup of your important data.
2. Connect your ipod to the computer that you want to be the primary computer.
3. Open iTunes and synchronize.
If you can't unlock your ipod and you don't have access to the primary computer, your only option is to restore the Ipod, which will erase all music and data.
Please take time to rate me
Bud

Apr 03, 2013 | Audio Players & Recorders

2 Answers

My ipod is just playing without the sound carrying through to the speakers. I dont know how to make it work?


Verify there is nothing plugged into the headset port, including headsets, headphones, or adapters.
Original iPhone only: While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris in the headset port:



To remove debris in the headset port, try connecting a pair of headphones to the headset port and then remove the headphones. Repeat this several times.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (choose Settings > General > Bluetooth).
If that doesn't work, try restarting the iPhone. Hold the Sleep/Wake button until "slide to power off" appears. Slide to power off your device. When it is off, press the Sleep/Wake button to turn it back on.
If restarting the iPhone doesn't resolve the issue, try restoring the device.

May 28, 2011 | Audio Players & Recorders

2 Answers

Motorola S9 bluetooth headphones


Try 0000 this is standard manufacturing default code for nearly any blue-tooth device that has security feature enabled and because the moto s9 as far as i can see has no way of being able to change this code it must be still at the manufactured setting

Aug 06, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Apple iPod nano 2nd Generation MP3 Player Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Apple Audio Players & Recorders Experts

Jazz Boyce
Jazz Boyce

Level 1 Expert

728 Answers

mac colar

Level 2 Expert

421 Answers

Sean Cole
Sean Cole

Level 2 Expert

250 Answers

Are you an Apple Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...