Question about GE Thompson 25901EE1 Cordless Phone

Open Question

No dialtone on one of three handsets GE 5.8 GHz 25942ee3

Just as simple as that. The third handset is dead, dead, dead. No dialtone. No nothing. Worked fine until yesterday.

Posted by on

2 Suggested Answers

  • 1 Answer

SOURCE: No Dial Tone 1 Handset

I think I have the same phone. You have to put the handset with no dialtone in the main charger for about 30 seconds to reset it to the base.

Posted on Dec 25, 2008

blue_tator
  • 1 Answer

SOURCE: No Dial Tone 1 Handset

hope this helps



http://www.home-electronics.net/ge/pc/IB/25942GE3_IB.pdf

Posted on Feb 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i program your 20200-1 hand set telephone. it has 13 number memory. that i wold like to program?


To program one of the three emergency buttons:
1) lift the handset and wait for dialtone
2) press the STORE button
3) dial the phone number
4) press the STORE button
5) press one of the three emergency buttons
6) replace the handset in the cradle
To use; lift handset and press an emergency button, the phone dials the number stored for that button

To program one of the ten memory locations:
1) lift the handset and wait for dialtone
2) press the STORE button
3) dial the phone number
4) press the STORE button
5) dial a one digit number(0-9) to store the number in that location
6) replace the handset in the cradle
To use: lift the handset, press the MEMORY button, dial the memory location digit(0-9), the phone dials the number stored in that memory location


Here is a link to download the manual.
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

Feb 11, 2011 | Phones

1 Answer

No dial tone but the word "talk" appears and it lights up so I don't think the battery is dead.


I agree that the battery sounds good.
So, do you have another phone to confirm that you have dialtone coming into your home?
If so, then the two ends of your wireless phone are not communicating...
They will try to resync if you power both ends off for a few minutes (unplug the base and remove the battery from the handset).

After a few minutes off, reconnect everything and place the handset in the base.....
After 5 or so minutes, test again. If it is NOT broken inside, it should provide dialtone (if it is coming into your home).

Oct 25, 2009 | Phones

1 Answer

No dialtone on the two exta headsets


You can download the instructions from GE here. In the meantime, try placing the handsets onto the main base unit for 20 seconds each. The instructions say this is how you register the extra handsets with the base.

May 30, 2009 | GE 25952EE1 Cordless Phone

1 Answer

All three phones do not work simultaniously


you must place each handset on the main base for a few seconds

Apr 16, 2009 | Phones

1 Answer

Can't talk on both phone at same time. second on is always dead.


The DXI4286-2 is an Analog phone, it does not allow for both handset to be used at the same time. You can transfer a call from one handset to another, but cannot talk on both at the same time.
The following is from the user's manual for your phone:

Unavailable message is displayed
on the LCD screen of the
handset.
• Make sure the other handset is not already in use. Both handsets cannot be in talk mode at the
same time.
• Place the handset in the main base for at least 5 seconds to re-register to the main base.
• Make sure the handset is not too far from the main base when trying to use.

You might want to try one of the DECT or a Digital 2.4 or 5.8 GHz phones, they allow you to use multiple handsets at the same time.

Apr 04, 2009 | Uniden Cordless Phone

1 Answer

GE 2.4 GHz cordless telephone problem


Hi there, maybe I can help;
Is the phone base plugged into an switched outlet and is the switch off?

Let me know if I helped

Jan 06, 2009 | GE 21008GE2 Dual-Handset Cordless...

2 Answers

No Dial Tone 1 Handset


I think I have the same phone. You have to put the handset with no dialtone in the main charger for about 30 seconds to reset it to the base.

Dec 23, 2008 | GE 25932 Cordless Phone

1 Answer

Dead Uniden DCT5280 Handset


if battery just replace battery but the head sets are compatible with other handsets of same ghz say 2.4 you just gotta set in base and let base recognize new hand set these phones are practically built the same way but only with new technology

May 03, 2008 | Uniden Cordless Phone

2 Answers

Handset for ATT 5.8 GHz Cordless Telephone Model 5870


i have at & t 5870 cordless phone it is no t working. handset is dead i change the battery but still not working .please give some advice.

Mar 16, 2008 | Phones

Not finding what you are looking for?
GE Thompson 25901EE1 Cordless Phone Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Phones Experts

kakima

Level 3 Expert

96576 Answers

Cindy Wells

Level 3 Expert

4758 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a GE Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...