Question about Weather King 12AJA6001AH Air Conditioner

1 Answer

I'm renting an apartment with what appears to be an old...very old furnace. I've gone to the leasing office and nobody has come to look at it yet and it's been nearly 3 days without heat in my place. So here's the problem. I lit the burner as it must have been out the whole summer. I figured lighting the burner would give me heat but no luck. When looking at the furnance there's a chain pulley on the left with a low/high speed. When I pull the chain the motor/fan turns on but blows cold/cool air. No heat. I even jacked the thermostat up to 90 and still no heat. With the fan not running and the thermostat jacked there's still no heat. Nothing kicks on. My apartment is about 52 inside...very cold but wouldn't be so bad if it were 117 outside but that's not the case. Any suggestions?

Posted by on

  • Danny Clark
    Danny Clark May 11, 2010

    Have you checked to make sure the gas it turned on at the shutoff valve and at the gas valve?

×

1 Answer

I got a solution.don't mess with it.
just harrass the landlord till you get service.it's against the law not to provide you with heat.be patient though....we are coming off the holidays.any people are just returning to work.that includes supply houses to get parts.

by the way, did you pay your gas bill?check for gas to the gas valve at the inlet.

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get a landlord to fix my furnace?


Ask him if you should just call a furnace company to fix it and then deduct the cost from your rent check and include a copy of the bill in the rent check envelope.
Either he'll say ok or, more likely, he'll make sure he keeps getting full rent payments and finds the cheapest fix on his own before you hire someone expensive.

Feb 20, 2015 | Air Conditioners

1 Answer

I need to rent 20 units 3 tonner aircon. any body there to help me find where can i rent it


You are going to have to get help more local to you. I suggest you look at equipment rental companies in your country/city. I cannot recommend because I dont know here you are located, and please do not say.

You may find you can rent/lease this many units from a manufacturer or a distributor in your area. Were I you, I would be calling the distributors listed in your telephone directory.

Thanks for your question @ FixYa.com

Jul 28, 2011 | Air Conditioners

2 Answers

Furnace works good,but when it shuts off there is a bang that can be heard through out the house


Hi,
The bang is the ductwork contracting somewhere...finding that can be difficult and getting to it to fix it may be very hard...
The metal is snapping back into shape after being pushed apart by the air pressire...you maybe able to help it by making sure that all of the air vents are open so the duct does not build so much pressure inside...


heatman101

Apr 16, 2011 | Air Conditioners

1 Answer

How old is a ruud furnace model number ugaa- 08KC, ser. number RN3D104F18794988


Hello, The model number for Ruud/Rheem equipment is located in the 12-13 digits, these appears to be a 1994. I have seen some furnaces with an age older than when the home was built (a 1995 furnace in a home built in 2000), so good job checking the serial number. This gives you the age it was manufactured.
Hope this helps James

Apr 03, 2011 | Air Conditioners

1 Answer

When furnace cycles on theirs a slight oil smell until the blower kicks on I had the furnaced cleaned and nozzle replaced still the smell comes out of the heat register whats my next move tear unit apart...


You didn't mention how old your oil furnace is. But, if it's got some age on it and it's hasn't been serviced annually, the heat exchanger may very well be cracked. But, before you decide to tear it apart and make it a DIY project, you may well want to half a qualified service technician take a look at it. Because, replacing the heat chamber, even if you do it yourself, may be more expensive in the long run, than replacing the furnace with a more efficient, up to date model.

Don't forget, most oil furnaces can be converted to gas (either Natural Gas or Propane) which burns cleaner & hotter than oil. And cost less to operate. I did it in one of my previous homes and was glad I did. My annual heating cost decreased almost 30%. That savings paid for the conversion in 3 years.

Hope this helps.

Feb 16, 2011 | Air Conditioners

1 Answer

When the thermastat turns on the furnace doesn't ignite the burners and the pilot light is lit. Everything appears to be normal, fan runs, thermastat appears to work properly.


You may have an open limit or a bad gas valve. Check and see if you get 24 volts to the gas valve, if you do then you gas valve has gone out.

Oct 06, 2010 | Air Conditioners

2 Answers

I have a new home 1 yr and when the furnace kicks in, I am assuming the fan it makes a noise but as soon as the heat starts the noise is gone, could this be the furnace blower


Check by turning the unit off and turn the fan to on. Do you hear the noise now? The noise your hearing could be coming from your combustion fan assembly instead. Newer furnaces have a in-shot burner and are nosier than the old style of heater.

Jan 04, 2010 | Carrier XHB123D X/Y Series Heat/Cool Air...

Not finding what you are looking for?
Weather King 12AJA6001AH Air Conditioner Logo

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Weather King Air Conditioners Experts

Tim Whalen

Level 3 Expert

3056 Answers

Cris Sparks
Cris Sparks

Level 2 Expert

338 Answers

John Tripp
John Tripp

Level 3 Expert

4636 Answers

Are you a Weather King Air Conditioner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...