Question about E-Machines T6532 PC Desktop

1 Answer

Machine will not boot up

When i turn it on all I get is a beep,beep beep ect.

Posted by on

  • bill_davis6 Dec 21, 2008

    thanks it is now working. All I did was take out the ram card and put it back in.

    Again thank you

  • Anonymous Dec 29, 2008

    I HAVE A 2.5 YEAR OLD EMACHINE T6532 WHICH WAS WORKING FINE UNTIL LAST WEEK. NO NEW SOFTWARE INSTALLED DURING THIS TIME FRAME.

    THE COMPUTER TOOK SEVERAL TRIES TO BOOT UP, OFTEN IT JUST HAD THE FAN RUNNING, BUT WINDOWS WOULD NOT START.

    WHEN IT DID GO THRU THE WINDOWS BOOT-UP I OFTEN GET AN ERROR MESSAGE WHERE THE SCREEN IS ALL LIGHT BLUE AND THE MESSAGE INDICATES THAT WINDOWS COULD NOT START BECAUSE OF AN ERROR BUT DOES NOT SPECIFY THE ERROR, IT JUST GIVES A SERIES OF 5 NUMBERS, EACH CONSISTING OF ZEROS AND LETTERS.

    THE RARE TIME IT DOES BOOT UP WITH WINDOWS ALL THE WAY THRU THE WIRELESS CARD WONT INITIALIZE AND I CAN'T GET THE INTERNET WORKING.

    ANY THOUGHTS!

    THANK YOU

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 45 Answers

This could be several problems in order of cheapest to most expensive:
Memory: Take out the RAM and re-seat it, apply even but firm pressure. Try to boot again. If this does not work...
Power Supply: Your power supply might be dead, try to pick up a brand-name one and boot once more...
Motherboard: This is the worst case scenario, your motherboard went poof buying a new computer might be better than buying a replacement motherboard.

Posted on Dec 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

How does it work?it beeps but the lights dont tell me nothing


what brand motherboard? model number? how many beeps?

Mar 04, 2016 | Computers & Internet

2 Answers

I'm having an aspire m5640. it does not boot. beep?


Yes if there are error on the system you should most likely hear a beep most of the time when there is no beep it is due to bad ram. Some times beep codes can't detect bad ram and your computer will not boot.
Open the computer up and see how many ram chips you have if you have more than one take the one in dimm slot 2 out. There should be small writing next to the slots 1,2,3,4 or Dim 1 dim 2 ect ect. you always want to keep slot 1 with ram so start by pulling out the ram out of slot 2 and turn your computer on. If your computer still dosn't post pull the ram out of slot 1 out and insert the ram that was in slot 2 into slot 1 if still no luck it's most likely your board but the best way to test this is to know that you have a good working stick of ram you could purchase one and if it dosnt work bring it back ... theres also the chance of your video card being bad but there is usualy a post code for it (beep code)
if you have no clue on what ram looks or how to open your computer just google for installing ram on a computer and you should find step by step guides

Jun 02, 2010 | Acer Aspire m5640 PC Desktop

1 Answer

If i switch ON my c300 it needs any keypress to boot the system coz if i dont it beeps continouosly and wont boot, what might be the problem?


This is a warning beep that is telling you that there is a configuration issue or faulty hardware issue like RAM, CD drive ect.. If you enter into the setup screen when it first boots you can look and see if anything is missing or configured wrong.

Jan 29, 2010 | HP Compaq Presario C304NR Notebook

2 Answers

When I power on screen shows Compaq boot screen then flashes to black then back to boot up screen. I cannot go any further. Please help.


Regarding with problem basically some part their failed. You need to check the RAM and HDD. Reset the CMOS battery remove the CMOS jamper with in 5 seconds and put it back. If you loss the first try you also recovery, to recover load the windows CD and boot up repair the windows until it is done. Good luck!

Regards
nicole

Oct 03, 2009 | Compaq Presario R3000 Notebook

1 Answer

P4M800 Wont boot


Hello there:
please try this first unplug the power to the computer
next open the case and unplug all of the cables and cords that connect to the harddrive cd rom ect ect
now locate the power supply cord that goes to the motherboard and disconnect
press the power button on the computer for 20 seconds and also if you have a reset button press it . what this hoes is releases any stored esd that is in the computer ..
now plug in the power supply back into the board and plug in the power cord and try to boot the computer and see if it comes on if so great just plug in the cords to the cd rom harddrive ect ect and than reboot and you should be ok

Sep 23, 2009 | Biostar P4M800-M7A Motherboard

2 Answers

Black screen on boot


Hello Kitana929!!!

It can be different problems, Battery, Power bottom not working, or better the mother board is bad. I really want you to connect your lap top to the power supply and check if there are lights on the indicated it is working. If there is light or lights on try to turn on your computer and pay really close attention for any noise or beeps. Then let me know what you came up with and I can get you pc to work.

Later

JUCEPEU

May 10, 2009 | Gateway M305CRV Notebook

1 Answer

I have a E machine when I turn it on the fans start up but all I get is a beep,beep beep ect. can any body help?


If it has 3 beeps it has something to do with the Ram so check that and check everything to see if plugged in

Dec 21, 2008 | E-Machines eMachines Desktop PC

1 Answer

Emachine Will not boot


different beeping patterns are codes which indicate what part of the hardware has failed (ram, video card, cpu, ect). the fan failure would not cause beeps, and would not cause the cpu to fail unless already in windows. if you could find out the manufacturer of your motherboard you could check with them about what the paticular pattern of beeps which you are getting mean.

May 17, 2008 | E-Machines eMachines Desktop PC

Not finding what you are looking for?
E-Machines T6532 PC Desktop Logo

Related Topics:

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18384 Answers

David
David

Level 3 Expert

778 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...