Move HD to another PC with SCSI card then make backup of all three partitions, then boot up your RIP and restore the HD using GHost program on the C drive. Check in the *.txt file how is done. Hope this help
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
E602 is a hard disk error. If the machine is coming up and working sometimes and not others, then either your hard drive is going bad or there is a corrupt file in the firmware. Try reloading system software if the issue is still present replace the hard drive. Loading system software requires special software (Service Support Tool) made by Canon.
Hi, Do you have experiance with canon software upload and disk issues?
To upload system software, system language and format you need canon's service support tool and PC with Centronic interface. There is catch for HDD type and you need to write the HDD's serial number in Service support tool database ( THESE IS ONLY DONE IF YOU CHANGE THE HDD WITH NOT CANON ONE ).
Turn machine on while honding down the 1 and 9 keys.Machine will run a hardrive check program that takes 20-30 min.Power cyle main power in about an hour.If this dosn`t work system software and or new hardrive.$$$$$