Question about Texas Instruments TI-84 Plus Calculator

1 Answer

TI Connect problem with Mirage OS

I just downloaded Mirage OS to my calculator, and I was able to transfer a few programs. Now, it isn't letting me transfer any Mirage OS programs at all to my calculator. Can anyone help me?

Posted by on

  • calvinpom Dec 23, 2008

    I wish that was the problem. That would have been very simple to fix. I've already tried that, though.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 73 Answers

It is possuble that you have run out of archive space. To clear some up, press 2ND - MEM (the + key), 2 then 1. This will give you a list of all things on your calculator. Some of these may be neccessary for some math courses, but you can always put them back on later, so you can remove anything you want from here without any irreversable effects. Delete anything you don't need (excluding the games and Mirage, of course) by moving next to it with the up and down arrow keys and pressing the DEL key.

Posted on Dec 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you transfer ti83 os to ti 84?


The TI83Plus has the capability to transfer its OS to another handheld device. It is possible that the TI84Plus hardware will accept it. But why downgrade?. Why not resinstall the OS? The latest version 2.55MP is available on the TI website.
You say emphatically that you tried everything and maybe so, but I will ask you: Have tried to connect the calculator to a computer and explored its content with TI connect. You may retrieve some information about its status.
The TI connect software will allow you to transfer a version of the OS even if the calculator appears to refuse to turn ON (screen contrast problem.) If it cannot it will let you know.

Try again.

Feb 03, 2012 | Texas Instruments TI-84 Plus Calculator

1 Answer

My RAM was cleared and now all of my favorite programs (including wrong calculation programs) were cleared. How am I supposed to revive the programs?


The applications created by TI people can be downloaded from education.ti.com and transferred to the calculator using the TI Connect software. Similarly, the third party program found on the Internet at tiCalc.org or other sites can also be downloaded and transferred to the calculator. As to the programs you typed in yourself, you will have to retype them again.

To prevent future losses of programs you must frequently backup the contents of your calculator on a computer. Use the TI connect backup feature.
I must add that you can also transfer programs and apps from a similar calculator.

Jul 30, 2011 | Texas Instruments TI-84 Plus Silver...

1 Answer

Urgenttttt --- when i used notefolio on my computer to transfer notes to my calculator TI-89... i could not find transferred notes on my calculator!! where can find it?? or do i have to download...


You need to install notefolio to your TI-89.

You can download the program from:
http://education.ti.com/educationportal/sites/US/productDetail/us_notefolio_89.html

After you download the program file, you can use TI-Connect to transfer the program file to your calculator (after you connect the calculator to the computer with the USB cable). To transfer the files, simply drag and drop the program file onto the TI-Connect icon on your computer.

To learn more about the Notefolio app, here is the guidebook:
http://education.ti.com/educationportal/downloadcenter/SoftwareDetail.do?website=US&appId=6204&tabId=2

Nov 25, 2009 | Texas Instruments TI-89 Calculator

1 Answer

I get a access denied error when i try to transfer programs to my ti 84 plus


Hello,
Here is what the TI Knowledge Base has to say about resolving the problem you have.Hope it helps.

How do I resolve the error "Access Denied" when transferring an App or OS using the TI Connect software?

The error "Access Denied" indicates that the TI-Connect software could not complete the current transfer due to an unforeseen error. Please try the following troubleshooting steps if the error persists.
Perform a manual "Garbage Collect" on the calculator (TI-83 Plus and TI-84 Plus family only):
• Press [2nd] [0] [TAN] [ENTER] [ENTER] [2].
NOTE: A manual "Garbage Collect" can take up to 5 minutes to complete.
• Attempt to transfer data to the calculator.
Uninstall and reinstall the TI-Connect software:
• Go to Start >> Settings >> Control Panel or Start >> Control Panel and select "Add or Remove Programs".
• Locate the TI-Connect software in the list and then choose "Remove".
• Once the software uninstall process has completed, please shut down and power off the computer.
• Wait approximately 20-30 seconds and then reboot into Windows.
• Download and install the latest version of the TI Connect software from the TI Connect Software home page.
• Once the TI Connect software install process has completed, restart the computer before using TI-Connect.
• Attempt to transfer data to the calculator.
If the above troubleshooting steps do not work, please contact TI-Cares Technical Support for additional troubleshooting.

Oct 28, 2009 | Texas Instruments TI-84 Plus Calculator

1 Answer

Can you delete ram with ti connect?


This is your question which I think is the solution for this question!

I downloaded Mirage OS, and now I can't download any of the games. I downloaded tetris before, and then I came back and can't download anything through TI connect.


Obviously, at times ti connect is going to be worthless to you if you have OS Mirage. So, that's correct! Plus, it didn't cost me a calculator to find that out!

For you to get it off? I can think of a few, I glad I don't have too..

May 26, 2009 | Texas Instruments TI-84 Plus Silver...

1 Answer

MIRAGE OS HELP


I'll just tell you your calculator is going to crash big time if you don't get the 3rd party software off of it. sooner more than later.

Jan 24, 2009 | Texas Instruments TI-84 Plus Silver...

1 Answer

Is there a way to play games and put in a password on a TI-83 plus?


Yes, there is. There is a program called mirage os and another one but i forgot the name. You should google it to find online. You need to have ti connect which you can get it off the ti website. Well mirage os can have a password by pressing alpha in it. Also in order to have a password to turn it on you would need to go to mirage and then press on and then it should turn off. To program you would need to know assembly or ti basic (they are basically the same language). To start programming he would need to press the prgm button and the options are reached by pressing the prgm button again.

Sep 10, 2008 | Texas Instruments TI-83 Plus Calculator

1 Answer

Error message for TI-84 Plus


Try and resolve this issue by re-installing the calculator's operating system using the TI OS Downloader. To do this, please follow the steps listed below. Be sure you have fresh batteries in your calculator.

1. Download the OS 2.43 file to your computer (preferably the desktop).

2. Open the TI OS Downloader by going to Start>>Programs>>TI Tools>>TI Connect>>TI OS Downloader. If you do not see TI OS Downloader, you may need to install the latest version of TI Connect. You can download a free copy from:
www.education.ti.com/downloadticonnect

3. From the main screen, select your calculator and cable type. Click "Next" to continue.

4. From this screen, locate the OS 2.43 file by clicking on the yellow browse folder and navigating to the location where you downloaded it. Double-click the OS 2.43 file to select it.

5. Remove one triple A battery from your TI-84 Plus. With the battery removed, press and hold the [DEL] key while you re-insert the battery.

6. You should see a "Waiting..." message on the screen of your calculator. If so, disconnect the USB cable from your computer, re-connect it and then click "Start Download". This should begin the OS transfer process.

Aug 19, 2008 | Texas Instruments TI-84 Plus Calculator

11 Answers

TI-84 PSE: Stuck on waiting... please install operating system now screen


The best way to solve this problem is to get a 2nd TI-84 to link into with the linking USB cable. Then turn on working calc press the 2nd button then link button (or the XTON) variable button. Scroll up to option G: SEND OS "DO NOT HIT ENTER YET" and then remove and replace one battery from the non-working unit. NEXT press enter on working unit to SEND OS.

Oct 18, 2007 | Texas Instruments TI-84 Plus Silver...

5 Answers

I cant do anything on my calculator.....when i turn it on it says "waiting... please install calculator software now." When i press the "on" key, it says, "ERROR! Press any key to turn the unit off. Then...


i've got a similar problem...my ti 84+ doesn't turns on anymore...reseting device didn't change anything. the ti-support wasn't that big help..
but its right, how to communicate with a calculator, that doesn't want to get turned on!??!.

Oct 01, 2006 | Texas Instruments TI-83 Plus Silver...

Not finding what you are looking for?
Texas Instruments TI-84 Plus Calculator Logo

Related Topics:

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Texas Instruments Calculators Experts

kakima

Level 3 Expert

96518 Answers

k24674

Level 3 Expert

7987 Answers

Stevan Milanovic

Level 2 Expert

243 Answers

Are you a Texas Instruments Calculator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...