Question about JVC AV-36P902 36" TV

1 Answer

The digital clock on my 30"JVC is showing in the bottom of screen

The TV is about 6 or 7 years old and I can't find the manual to help with the settings. I can access the settings but I can't make the clock disappear. The Model No. is AV-32120. Thank you for your time. Happy Holidays.

Rona Reid

Posted by on

  • Anonymous Dec 29, 2008

    i have exactly the same problem - I've gone thru the menu but can't find ANY where to turn off the clock.

  • ronalillias Jan 04, 2009

    Hey I fixed it! Unplugging the TV for 3 minutes didn't help, and there's no display button on my digital cable remote. Well I knew I had removed it using the menu accessed directly by the buttons on the TV at least once before, and my son had done it once too. Maybe it is re-appearing because of some timer, I don't know. But I went back into the menu and using the "Set Clock" instructions, I changed the MODE from Auto to Manual, the scrolled down using the menu button and pressed the 'select' button on the line that said FINISH. Then I pressed the 'exit' button. The clock disappeared! I went back into the menu to double check the steps I had taken, and to my suprise the MODE had switched back to Auto. I left it like that. The clock is gone for now. I am content. Hope this is helpful to someone else.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

The menu screen does not function the display. Without the original remote or a universal remote that does not have a display button, try unplugging the television for at least 2 minutes or more and plug the tv back in. This should reset the tv display. If the universal remote has a display button, depress the display button until you get the desired display results. Reference the user guide below for the display button.

The digital clock on my 30 JVC AV-36D503 36" TV - User Guide (page #43)

Posted on Jan 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset TV?


reset jvc tv Questions & Answers - Fixya

www.fixya.com > Forum > Tags
... reset jvc tv question. Get free help, tips & support from top experts on reset jvc tvrelated issues. ... one on the Right 2. HDMI input not working ... ...reset television. I have a jvc 42inch that was just going to main logo screen and not beyond it.

[PDF]LCD Television Users Guide - JVC

resources.jvc.com/Resources/00/01/14/YA654ien.pdf
Audio Reset . .... See the included manual on mounting procedures. - JVC is not responsible for ... 2) Remove the screws from the back of the TV. 3) Pull out the ...

HOW TO FIX A JVC HD BIG SCREEN TV - YouTube

? 6:38
https://www.youtube.com/watch?v=r4v-xzUpQDM
Apr 11, 2012 - Uploaded by kyle dubb
Did your HD D.L.P. t.v. stop working? This movie clip will show you step by step how to easily fix your big ...

Dec 19, 2015 | JVC Audio Players & Recorders

1 Answer

No video on my JVC AV-30W475 30" flat screen.


It sounds like you have bad solder connections in the Vertical circuit or the horizontal circuit. The Vertical IC may need to be replaced if resoldering does not help.
You will need to call a good TV Tech for this repair.

Aug 09, 2009 | JVC AV-30W475 30" TV

1 Answer

Older JVC 32" TV has lines & fold over at the top of screen. TV is about 6 years old.


Check the vertical section .. You will find few Electrolytick capacitor..replace all with new one or replace the filter capacitor at vertical IC supply..

Jul 10, 2009 | JVC HD-52G787 52" Projection Television

1 Answer

Screen on JVC TV distorted


There is an Aspect button on the Remote for the TV. This button will fix this problem.

Aspect function strectches the picture horizontally or vertically to get rid of black bars in some movies. Sometimes this is good....sometimes bad

May 19, 2009 | JVC Televison & Video

1 Answer

I have a JVC tv only 1 year old and the picture is getting dark.


Sorry to tell you but JVC is a well-known un-reliable brand and if it's cheap, probably even worse. U may have screen burn from leaving a games console on while plugged into the tv, even if its not showing the game, it will burn it onto the screen. :(

Mar 24, 2009 | JVC AV27F476 27" TV

1 Answer

Double vision on tv with purple and green colors


Hello,

This television set, as well as most rear-projections, is prone to convergence driver problems. There are two large chips (STK392-110's) in the TV that need to be replaced, as well as some resistors that are likely damaged as well. Any competent TV repair shops should be able to repair this TV for 200-300 dollars. It is important to note that if the back of the TV is taken off without the proper prep., the Digital input (DVI) will be disabled permanently.

Hope this helps you...

Dec 30, 2008 | JVC AV-56WP74 56" Rear Projection...

9 Answers

HDMI no longer working


JVC AV-48P575 HDMI reset procedure:

1. Unplug HDMI cable from tv.
2. Unplug the tv.
3. Remove the rear (low) back cover.
4. Find the 6 pins on the board of the HDMI module and shortcut the pins no.1 and no.2 using a jumper(i use an old hard drive jumper).That's the higher to pins if you can't see the number.
5. Put back the rear cover.
6. Plug the tv.
7. Turn on the tv.
8. Unplug the tv(without tunrning it off).
9. Remove the back cover.
10. Remove the jumper on the pins 1 and 2.
11. Put back the rear cover.
12. Plug the tv and you're done.

Jan 04, 2008 | JVC AV-48P575 48" Rear Projection...

2 Answers

Clock stopped posted at bottom of tv


In order to remove the Clock display on the TV screen press the DISPLAY button on the remote, it may be labeled OSD on older remotes. As this button may bring up more than one display it may be necessary to press it more than once.

Jul 13, 2007 | JVC AV-27230 27" TV

Not finding what you are looking for?
JVC AV-36P902 36" TV Logo

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...