Question about Toshiba e-STUDIO 282 Black and White Copier

1 Answer

Replacing staples How do I replace the staples on the Studio 232 staple replacement

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 126 Answers

If I remember correctly, you open the cover and there should be a release handle, the staple unit will swing/ slide out , gently grasp the used staple cart. and while pushing down and pulling out. Install new staples.

Posted on Jan 05, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Add staples

replace staple unit, they are terrible.

Dec 07, 2014 | Toshiba E-Studio 456 Multifunction Copier

1 Answer

How to add staples to copier

Oper the finisher door. Pull out the staple cartridge holder and replace the new staple cartridge. Follow detailed instructions at the side panel door ..

Jul 07, 2014 | Toshiba e-Studio 4540C Multifunction Color...

1 Answer

How to load staples in canon imagerunner 3300 copier

Does your copier have the finisher or saddle to have staples? There should be instructions in the user manuals for replacing staples. If you don't have the user manuals, I'd ask Canon to purchase replacement copies or look on the web.

Nov 23, 2009 | Canon imageRUNNER 3300 All-In-One Laser...

1 Answer

Replacing the Staples

The copier will inform you when it's out of Staples. To check the staples, open front cover of the finisher (device on left that catches copies) There should be a pictorial diagram on how to remove/install cartridge on inside surface of cover. Page 7-12 of the Copier Reference Guide if your finisher has 3 trays. Page 7-38 of the Copier Reference Guide if your finisher has 1 tray. Hope this helps.

Jun 18, 2009 | Canon imageRUNNER 400S Copier

1 Answer

Replacing staples

1-Open door in finisher ( where paper is delivered and stapled)
or push finisher away from copier and look on the right rear
2- remove the old unit by lifting up and out ( should be a small white box
3-before inserting new staples remove the band surrounding it : Careful not to drop, if you do you must make sure they face the right way in the box !!!!!!
4-insert in stapler

Sep 08, 2008 | Canon imageRUNNER 400S Copier

1 Answer

Replacing staples

Fur this Pls contact to HCL Infosystems Ltd (O.A Division)
Delhi address-
HCL,261,Okhla Ph-3,New Delhi-20
Phone No-

Jul 19, 2008 | Toshiba e-Studio 232 Black and White...

1 Answer

Out of staples

in the menu /control panel choose the single or double sided copies w no staples

Jun 12, 2008 | Toshiba e-Studio 350 Copier

1 Answer


please make sure that there are no staples jammed in the unit,
take the staple cartridge out, release the leaver on the staple cartridge and remove the first sheet of staples, close up the leaver, and reinsert in the copier.

then try to staple again

May 13, 2008 | Toshiba e-Studio 350 Copier

Not finding what you are looking for?
Toshiba e-STUDIO 282 Black and White Copier Logo

Related Topics:

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Printers & Copiers Experts


Level 2 Expert

254 Answers

Anthony Chiang
Anthony Chiang

Level 3 Expert

524 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you a Toshiba Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides