Question about Televison & Video

Open Question

Proscan ps61700 television when turned on smells like it is burning, so when we opened it we see that one part is on fire. obviously, we no longer use it, but wondering how to fix it. the part on fire is small, and says "4045273A" and then "DET99078".. can we just replace the part?

Posted by on

2 Suggested Answers

Slinteriors
  • 8617 Answers

SOURCE: i need a part #

Your model has the CTC195 chassis which has flyback number 239111 you can get a replacement at the following link for 13.99. hope this helps here is the link.
http://www.electronix.com/catalog/product_info.php/products_id/13075

Posted on Feb 10, 2008

  • 1 Answer

SOURCE: Proscan PS61700 Beeping no picture

I have a 60in Proscan Projection TV. My picture is out and the TV only beeps.

Brian Allen

Posted on Mar 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I replaced the power supply unit on my 50" ProScan flat screen and now it wont even turn on just a clicking sound when you hit the power button.


The replacement power supply could have been installed incorrectly or may have been defective as received.

Nov 20, 2014 | Proscan Televison & Video

1 Answer

Plasma made a loud pop then shut off and will not turn back on. There was also a burning smell. Any suggestions on a fix and price is appreciated.


Having similar problem and it sounds like an obvious short circuit if you heard it and can smell it, and it probably took out power supply fuse, so the first thing to do is pull off back of TV and look for obvious toasted components by eye or smell. Capacitors sometimes will pop when they go, and you can see the tops will be bulging out, or black marks, so look and smell all large capacitors first on power supply main board, then check to see if fuse blew. Sometimes the obvious is easy to fix.

Good luck,

Sep 30, 2012 | Dell W4200 42 in. HD-Ready Plasma...

1 Answer

On my ld4088 flat screen there was a smell and then the screen was no longer visiable I could hear the sound But no picture


First is unplug and do not attempt to turn set on.

Someone qualified needs to open the set and see what burned.

Simple as that---keep trying to use and other parts not bad may be destroyed not to mention risk of a fire.

Mar 29, 2012 | Televison & Video

1 Answer

When I turn knob to on, dryer just humms and i smell a burning smell. what could be the problem?


Hello
Obviously from what you describe, the drum is not turning.Most likely the drum belt is burning against motor pulley or idler pulley( most likely broken). If it were burning electric smell that would indicate motor under duress.If the dryer is full ,empty it and try again. You could have overloaded.If same result you'll have to open her up and check belt ,pulley and motor.

All fixable
Good luck

Feedback greatly appreciated1

Jul 28, 2011 | Kitchen Ranges

2 Answers

I have a sony bravia LCD TV. I heard a clicking sound and then there was a burnt smell. Is the TV worth fixing?


If you call Sony's customer care and create a case file/ticket number with them they are supposed to have a service provider look at your television at no cost to you. You have to specifically state there was a burning smell or an electrical burning smell. The evaluation from the service provider should be free. The repairs may not be free but you would not have to go through with them if they aren't free and if you don't feel that they are worth the cost. The company is supposed to offer to evaluate your television because by law if your television caught fire and there was personal or property damage you could sue them. They want to avoid this at all costs.

May 05, 2010 | Sony BRAVIA KDL-40S2000 40 in. LCD HDTV

1 Answer

5 min to turn on with a electric burning smell


Probably the power supply board has leaky capacitor's.
They can smell bad. if you could see the PSB the caps would be puffed at the top and leaking oil. It wont be long and the set will go out " lose all power"

Mar 05, 2009 | iLO V27DMBX Television

2 Answers

Proscan 61700 chassis ptk195 ft


There are two STK on conv. board, even if they are not 392-180.

To know if the STK are the problem, test the pico fuses at base for continuity.
Replacing STKs require a precision soldering job, using thermal compound and taking care not to damage C board. This is not a job for beginners, and should be done by an experienced technician.

Here is how an stk looks like:

398eb7f.jpeg


c835318.jpeg

Mounted:

61862c8.jpg


Dec 28, 2008 | Proscan PS61700 60 in. Rear Projection...

1 Answer

I need a part # for a flyback transformer for an rca proscan model # ps61700


Your model has the CTC195 chassis which has flyback number 239111 you can get a replacement at the following link for 13.99. hope this helps here is the link.
http://www.electronix.com/catalog/product_info.php/products_id/13075

Feb 10, 2008 | Televison & Video

1 Answer

Proscan PS61700 Beeping no picture


I have a 60in Proscan Projection TV. My picture is out and the TV only beeps.

Brian Allen

Feb 03, 2008 | Proscan PS61700 60 in. Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...