Question about Kenmore Washing Machines

Open Question

Manaual for kenmore heavy duty washer model #E12477 type 11301

Onwers manaual

Posted by on

6 Suggested Answers

IFIXALL
  • 868 Answers

SOURCE: model 110.22952100 Kenmore Elite Heavy Duty Washer

Motor is bad.Replace the motor.

Posted on May 22, 2008


onthejob5130
  • 640 Answers

SOURCE: What is the capacity of a my washer.

4.2 thats about 26 pounds

Posted on Jan 04, 2009

  • 91 Answers

SOURCE: slow cold water only fill kenmore heavy duty 70 902202

remove fill hoses and inspected for debris or cloggs ,,,,

Posted on Jan 04, 2009

  • 20 Answers

SOURCE: squeaking noise Kenmore portable clothes washer

He checked the brake? i wonder why.... sounds like u need some grease on the agitator shaft or possibly something else.

Posted on Feb 13, 2009

SolutionGuy
  • 331 Answers

SOURCE: What is the date of manufacturing based on the serial number of my Kenmore 70 series washer?

Tyler,
It came off of the Clyde, OH production line the 26'th week of 2001.

Amazing, ain't it? Seriously... the info is embedded in the serial number. Here's the link to the code sheet.

Please remember to rate this solution as "FixYa", OK?

SG

Posted on May 02, 2009

jsrock516
  • 5911 Answers

SOURCE: Whirlpool Ultimate Care Heavy Duty Washer will not spin

It sounds like you have a broken motor coupling. This is a very inexpensive and simple repair.

If the washer will fill and drain, but won't agitate or spin, you may have a broken motor coupling. The noise of the motor engaging, lack of agitation and ability to still drain are the usual symptoms. This is a common fail item with this model washer through normal wear and tear. Newer versions of the coupler are more resilient and resist breaking. The following link explains how to replace one:

http://www.fixya.com/support/r385252-replacing_motor_coupling_whirlpool_top
The motor coupling is located between the drive motor and the transmission and takes the place of a drive belt. They do wear out and can break. The replacement part number is included in the link I provided and is an improved upgraded coupling that is more resilient. It should last longer. If you have questions, or require additional assistance, please let me know. I hope this helps you.

A replacement coupler can be purchased on line at appliancepartspros.com for about $11. Just use the part number in the link and "Search by Part Number" for your search criteria.

Posted on Jul 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Washer has a blouse caught under the agitator. How do I get it out?


get both hands on the paddle (top end in the machine) and pull down and towards yourself,, and the paddle will come out letting you to take the blouse out

Oct 19, 2012 | Kenmore Washing Machines

1 Answer

Want a owners manual for a stacable Kenmore heavy duty Mod 110.88732796 -


Go to managemylife.com and type your model number under the "Manuals" link. Your owner's manual is available in .pdf (Adobe) format that you can download or print for FREE. I hope this helps you.

Apr 02, 2010 | Kenmore 98702 Stacked Washer/Dryer

1 Answer

Kenmore heavy duty 70 series model 110-8237012


probably your drain pump leaking it has a seal right where it attaches to motor,,,,mine is leaking there but haven't replaced it yet! lol

Feb 27, 2010 | Kenmore Washing Machines

1 Answer

Direct drive-type Kenmore washer will not spin.


Check the video at the following link. I think you will find it helpful. Hope so and best wishes.

http://www.youtube.com/watch?v=WLPGs2UMUJc

Sep 14, 2009 | Washing Machines

2 Answers

What is the date of manufacturing based on the serial number of my Kenmore 70 series washer?


Tyler,
It came off of the Clyde, OH production line the 26'th week of 2001.

Amazing, ain't it? Seriously... the info is embedded in the serial number. Here's the link to the code sheet.

Please remember to rate this solution as "FixYa", OK?

SG

May 02, 2009 | Kenmore 3.2 cu. ft. Plus Top Load Washer

1 Answer

Kenmore Heavy Duty Washer Leaking from bottom


Probably the drain pump seal has gone bad.
Check it for leaks.
If your floor is good and level look for water near the front center of the machine.

Feb 25, 2009 | GE WHRE5260E Top Load Washer

1 Answer

Squeaking noise while washing is going on. No noise at any other time. Repair man checked brake and said it was good. Any help would be wonderful as the noise is driving me crazy. Kenmore model...


Have you or did the repair man check the belt to make sure it was still good and nothing was stretched? Also the motor to make sure that it was not causing this problem? And everything is oiled properly?

Feb 09, 2009 | Kenmore 2.1 cu. ft. Portable Top Load...

1 Answer

Squeaking noise Kenmore portable clothes washer


He checked the brake? i wonder why.... sounds like u need some grease on the agitator shaft or possibly something else.

Jan 04, 2009 | Kenmore 23822 Top Load Washer

1 Answer

Speed Control only works in Heavy Duty


sound like your motor is going out ,,,, the wiring at the motor may also be loose from out of balance loads

Nov 23, 2008 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore washer top load heavy duty 80 fluid leaking


It's rusty Water probably the water pump housing is cracked might be replaceable need to take a look at it or call Kenmore for the part

Apr 13, 2008 | Kenmore 24032\24036 Top Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Jesus  Colon
Jesus Colon

Level 1 Expert

12 Answers

Fred Sops

Level 2 Expert

271 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...