Question about Intel DG31PR Motherboard

3 Answers

DG31PR USB Devices not detecting !!

I bought new pc with DG31PR mother board after I formatted and reinstalled the drivers. USB HDD and USB Wi fi Adapter is not working. Its dectecting after that not working.

Can you please help me to recover this problem !!

Posted by on

  • 3 more comments 
  • peble0peble Dec 21, 2008

    No boss !!



    I didnt went to install the Vista I reinstalled the Windows XP only.



    After that its showing the problem. Can you help me please..

  • adnanabbasi Jan 01, 2009

    ihave the same prob

    but no way to solv this

    if anyone has

    plz share

  • Durdle Jan 03, 2009

    Same issue here, tried with Linux, XP, Vista. gives a generic malfunction error in windows, and an enumeration error in Linux.

    I flashed the bios with the latest bios from Intel, still a no go. Neither the onboard or frontside ports work, I'm stumped, ready to return the board.

  • Anonymous Jan 19, 2009

    DG31PR USB Devices not detecting !! problem, and notify you when a new solution is offered.

  • Roy Lonsinger
    Roy Lonsinger May 11, 2010

    What operating system? If you had Windows XP installed before & then went to Vista with the new motherboard you will need new drivers.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey
i solved this
Just go to device manager
look for ur usb root hubs
rights click on them
uninstall the driver
aftr uninstalling all usb drivers
click on 'scan for hardware changes' icon
windows will again load the drivers and it will right

Posted on Jan 02, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,179 Answers

Try downloading the newest Windows XP drivers from the manufacturers website for your devices. Once you have the newest drivers install them and see if that fixes the problem. Hope this helps.

Posted on Dec 21, 2008

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

Fiend your solution direct from intel. Here is your solution....

DG31PR USB Devices not detecting !! - d89218e.jpg

http://www.intel.com/motherboard/prob676ijt65/solution
135

Posted on Mar 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sir i hve intel DG31PR mother board and


Did u fully formated ur pc? if u get virus also u get this problem n when u install the os dont use the same os cd what u have already used ok coz maybe the virus is in ur os cd files ok do agin and let us knw what is happening

May 22, 2010 | Intel Motherboard

1 Answer

Faulty usb`s


i should try to instal the usb driver again then try to connect 

Nov 20, 2009 | Motherboards

4 Answers

Problem with DG31PR board while loading windows 2003 server.


check HDD and RAM, make sure your HDD new formated

Sep 03, 2009 | Intel DG31PR Motherboard

1 Answer

Intel dg31pr mother board why dont show display?


First check your num lock led if it on and off when you press num lock key then your cpu is ok.
Then therer is issue with monitor to cpu loose connection
or
Screen resolution problem.
For that when you power up press F8 key then enter in enable vga mode.then go to control panel and dispaly then settings then change screeen resolution to 1024*768 then apply and ok.
Aslo reconnect connection from monitor to cpu vga port.
Also check in bios some times your harddisk is not detected proeprly.
If problem still remains open cpu cabinet and reconnect data cable and power cable to harddisk.
Refix RAM memory.
Pull cmos cell for 15 minutes then check.
Thanks for using fixya.
Pls rate solution if it help you .

Jul 18, 2009 | Intel DG31PR Motherboard

1 Answer

Problem with installing win2003 on motherboard DG31pr


It mainly due to the lower version of driver trying to install at the time of installation of windows 2003.because older windows does not contain proper driver for latest Mother board chipset.

So install latest Windows 2003 or updated windows 2003 Operating system.

Jun 25, 2009 | Intel DG31PR Motherboard

1 Answer

Can i install xp-sp3 without Sata driver on motherboard 'DG31PR'


You have a board with 4 SATA ports on it and a SATA HDD. The hardware detection routines will see this and load the SATA drivers. Why would you even want to try to set it up without them?

Mar 21, 2009 | Intel DG31PR Motherboard

1 Answer

DG31PR Problem with extender usb 2.0 in cascade


go into the control panal and looking in the following folders;
device manager, adding new hardware, network and sharing folder,
problems and report.

look trew the sections that apply
looking for any type of marks that should not be there
red, yellow, orange,
green mark okay

rod

Jan 30, 2009 | Intel DG31PR Motherboard

1 Answer

Pendrive is not detecting


Try to enable your usb ports in Setup mode...

Try to test your usb port with another pendrive...

Reinstall your USB motherboard Drivers...

re-format your pendrive with a hp flash format utility....

Good Luck!

Dec 05, 2008 | Gigabyte GA-8IDXH Motherboard

Not finding what you are looking for?
Intel DG31PR Motherboard Logo

Related Topics:

2,118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

Sudeep Chatterjee
Sudeep Chatterjee

Level 3 Expert

3267 Answers

Are you an Intel Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...