Question about Singer 5050 Mechanical Sewing Machine

1 Answer

I have a singer cg 550 sewing machine and I am not sure which slot to put the bobbin thread in first

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 69 Answers

If you put the bobbin in the case with the thread coming off in a clockwise direction, the thread should just fall into a slot and gently tug on the thread and it will slide through the tensions. Lay it across the bobbin case and then pick up the thread with the needle.

Posted on Feb 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a singer CG 590C. It didn't come with manual. I'm just learning to sew. My bobbin was hung up with thread when I pulled on it I pull the whole bobbin casing out. How do I get it back in? Help


First thing, you should probably get a manual for your machine.
Singer CG 590 Commercial Grade Manual

How to thread Singer CG 590

This machine is listed as a commercial grade professional sewing machine, so you are going to have some additional learning curve if you are just beginning to sew.

...

Nov 23, 2015 | Singer Sewing Machines

1 Answer

I just received a new Singer CG-590. Have threaded the machine and bobbin. Each time I try to pick up the bobbin thread, the top thread wraps around the bobbin case. It will not pick up the bobbin...


try turning the bobbin the opposite way, and if that doesn't help then take the machine back and get another one, maybe even a different model

Dec 26, 2013 | Singer Sewing Machines

1 Answer

I just purchased a singer cg-550/500 and after threading the machine and inserting the filled bobbin, I was unable to bring up the bobbin thread with the needle. I followed the instructions carefully but...


if im not mistaken, the bobbin when you place it in the bottom, you have to thread it is as well to the part where the needle comes down and collects and goes back up. please re-look at instructions for placement of bobbin

Mar 05, 2011 | Singer Sewing Machines

1 Answer

Model CG-550. Needle hits a bottom plate. All thread and bobbin removed. Took the feed cover off. Do not see the problem.


Possible bent or wrong needle. If ok, check the zig-zag mechanism to see if it has come uncoupled from the needle mechanism. Good luck!

Oct 02, 2010 | Singer CG550 Mechanical Sewing Machine

1 Answer

New Problem...I have a Singer CG-550. When I try and sew anything, the needle hits something inside where the bobbin is. The little black casing holing the bobbin keeps moving all over the place, I slip...


On the right of the black bobbin case there are two screws, you can slacken those screws off and move the bobbin case nearer to the guard leaving enough room for the thread to pass through, if the needle is hitting the bottom you may need to retime the machine.

Mar 06, 2010 | Singer Sewing Machines

1 Answer

Excess bobbin thread under the fabric


I know you hate to hear this but you are probably threading it incorrectly. Make sure that the presser foot is in the up position when you thread the machine. This ensures that the tension discs are open and the thread makes it in between the disc.

Feb 27, 2009 | Sewing Machines

1 Answer

Singer CG-590


You can find a Users Manual plus a workbook that you can get in PDF and print. Users Manual is 44 pages and workbook is 58 pages. Go to www.mannualowl.com and search for Singer CG 590n manual. It's all free.

Apr 19, 2008 | Brother CS-8072 Computerized Sewing...

1 Answer

Lost maual on singer cg-550 c need the stitching sequinces or suggestions on why my bobbin side thread is largely looping. I have checked my threadng.


Have a look at this website.
If they do not have the manual you want email them and they will help.
The looping problem is the bottom tension is to slack, on the same website look at the repair section and it explains how to adjust the bobbin tension.
www.sewusa.com

Apr 17, 2008 | Singer CG754 Mechanical Sewing Machine

3 Answers

Help cannot use my singer cg 590!


I have also bought a Singer CG590 and after a few days of sewing almost threw it out the window!!!...a waste of money is what I say!

Mar 18, 2008 | Sewing Machines

Not finding what you are looking for?
Singer 5050 Mechanical Sewing Machine Logo

Related Topics:

355 people viewed this question

Ask a Question

Usually answered in minutes!

Top Singer Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Cindy Wells

Level 3 Expert

4759 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Singer Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...