Question about Candy DFI Plan Built-In Dishwasher

2 Answers

Candy cdi 1012 dishwasher

Hi, i'm stumped, my washer wont get hot or dicharge its waste,despite me changing the stat,i've had the pumps to bits and i cant find any blockages,it also discharges if you change programme after it goes into fault/lockout,as i'm an electrician by trade and am red hot on clothes washers, this is my first dishwasher repair, thankfully its mine! any ideas!

many thanks!

Posted by on

  • 1 more comment 
  • nthnbrn Jan 23, 2009

    We have the same machine and the same problem. Can find no blockage, electrician friend thinks it may be the PDC?

  • Anonymous Jan 28, 2009

    i have the same fault hoover has changed parts three times still not fixed mess job

  • mattv1971 Mar 08, 2009

    I have the same problem. We thought it might be a blockage somewhere and have cleaned everything but no joy.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My problem is exactly the same. What is the solution ?? Please help

Posted on Jan 04, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Did anyone ever manage to work out what the cause of this was? Our dishwasher is exactly the same. We had it fixed once under warranty and it lasted about a year before breaking again. Unfortunately we never asked what work was done during the first repair. Thanks. Stuart

Posted on Jul 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Candy cdi 1012/2-80 is leaking at bott of door. Whats up.


my candy dishwasher is leeking from the bottom of door what can i do

Nov 23, 2010 | Candy DFI Plan Built-In Dishwasher

1 Answer

My candy 1012 dishwasher won't drain fully- someone said that perhaps a filter needs cleaning- I've cleaned out the one in the bottom of the machine -is there another one?


CHECK PUMP,DISCHARGE LINE .
I WOULD START BY SEEING IF IT PUMPS OUT IN A LRG BUCKET 1ST.
SOMETIMES IT IS OUTSIDE OF THE D/WASHER.. FRED

Feb 14, 2010 | Candy DFI Plan Built-In Dishwasher

1 Answer

Candy cdi 1012 runs for approx 3 minutes goes to fault and does not make the spray arms move


I haven't got an answer to your problem, I just feel more comforted that someone else has the same fault as mine.

Feb 01, 2010 | Candy Dishwashers

1 Answer

Candy dishwasher CDl 1012/2-80, program stuck?


Hi Derek if its only been used about as you say ten times it will stil be under gaurantee,just call the supplier and have them solve the problem for you mate it sounds as if the program selector is faulty as it is all eletronic programming and could even be a faulty circuit board.
hope this helps

regards JL

Oct 04, 2009 | Candy Dishwashers

1 Answer

Dishwasher wont complete program 1 2 or 3


Hi,
Did you ever resolve this problem with your dishwasher, unfortunately i've exactly the same type of problem!
Thanks Steve

Dec 18, 2008 | Dishwashers

1 Answer

Candy CDI 1012 Dishwasher


providing its not under guarantee remove mains plug and remove door skin from front of door carefully, as it has to go back on, look for any broken wires just above the door hinge, there will be about 10 or 15 wires, its possible that if you have checked what you said have checked properly that one of these wires has got hot and broken (very common fault of all dishwashers aver 3 year old) replace wire with care etc, work safely,

Oct 06, 2007 | Candy 17 in. CS455 Built-in Dishwasher

Not finding what you are looking for?
Candy DFI Plan Built-In Dishwasher Logo

Related Topics:

1,503 people viewed this question

Ask a Question

Usually answered in minutes!

Top Candy Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Ryan S
Ryan S

Level 2 Expert

328 Answers

ptpumpman

Level 3 Expert

406 Answers

Are you a Candy Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...