Question about Asrock P4V88 (P4V88 RAID) Motherboard

1 Answer

Asrock Motherboard problems with SATA HDD

Hi,

i have Asrock P4V88, Socket 478, Chipset VIA PT880,
Celeron 2,8GHz
512Mb 400Mhz DDR RAM

i have tried to install a new SATA HDD, but even the BIOS did not recognized it. (Samsung HD322HJ) - SATA, 30Gb

(The HDD works because i have formatted it in another PC.)
ATA is working properly.

please help me what i have to do to work.

Thanks

Posted by on

  • 1 more comment 
  • pompom666 Dec 20, 2008

    yes, i checked every cable, both sata slots (there are two),

    all BIOS settings, did not work.



    i suspect it will 1,5Gb/s vs. 3Gb/s problem, but i do not know what to do.

    it is a 3Gb/s HD.



    pompom666

  • pompom666 Dec 20, 2008

    yes, i think the same,

    i have read more about it, sy use adapter (IDE-SATA), others buy SATA I HD.



    That's it,

    thanks



    pompom666

  • Mark Robinson May 11, 2010

    have you tried another data connection..ie another sata slot on the board....are all cables ok ?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,179 Answers

It is possible that you are trying to use a SATA II HDD in a system that supports SATA. SATA II devices are not backwards compatible usually,

Posted on Dec 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the max size of ddr400 memory you can fit into ddr1 & ddr2 dimm slots on a p4vm8 mother board


1) Total maximum amount for motherboard is 2GB.

2) There are 2 Ram Memory slots.

3) Maximum amount for EACH ram memory slot is 1GB.

Either DDR Sdram at 266MegaHertz, or 333MHz, or 400MHz.
PC2100, PC2700, and PC3200, respectively.

http://www.asrock.com/mb/VIA/P4VM8/

There is no DDR1 and DDR2 slots, in a manner of speaking.

May be marked on your motherboard that way, but stating it that way on a computer product support website = No.

You're going to make someone think, you don't know what you are talking about.

They may think you are referring to DDR Sdram, and DDR2 Sdram, and they know the motherboard only uses DDR Sdram ram memory.

Suggest state Slot 1 and Slot 2; or DIMM 1 and DIMM 2.

For additional questions please post in a Comment.

Regards,
joecoolvette

Mar 18, 2013 | VIA ASRock P4VM8 P4(S478)/...

1 Answer

Dear Sir, my mother board d101 has been damaged can i use of p4sd m/b insted of that while i want all rest parts remain using i dont want change ram,SMPS, Proccesser etc.


fbhushan, the Intel D101GGC motherboard (Grand Country) supports;

1) Intel Pentium 4, Intel Celeron D, and Intel Pentium D processors that fit in an
> LGA 775 processor socket.

http://en.wikipedia.org/wiki/LGA_775

The Processor has the socket holes, and the processor socket (LGA 775) has the pins.
775 socket holes, and 775 pins.

The Front Side Bus (FSB) can be either 533MegaHertz, or 800MHz.


2) Supports DDR Sdram ram memory at either 333MegaHertz or 400MHz.
(PC2700 and PC3200, respectively)

Will support Up To 2GB of ram memory.
Has two ram memory slots. The maximum amount for EACH slot is 1GB


3) The SMPS used for it has,
A) One 24-pin ATX main power cable

http://www.playtool.com/pages/psuconnectors/connectors.html#atxmain24

B) One 4-pin ATX +12 Volt power cable,

http://www.playtool.com/pages/psuconnectors/connectors.html#atx12v4


The Intel D101GGC motherboard has Four SATA headers (Connectors) on it, so I'm going to assume you are using a SATA harddrive.
This would mean the SMPS you are using should have at least one SATA power cable.

It should also have an assortment of 4-pin standard Peripheral power cables.
(Misnomered as 'Molex')



The Asus P4SD (Motherboard chipset Intel 865PE) supports;

1) Intel Pentium 4 and Intel Celeron processors that fit in a > Socket 478 processor socket

http://en.wikipedia.org/wiki/Socket_478

The Processor has the pins, and the processor socket has the socket holes.
478 pins, and 478 socket holes.

Your Processor will NOT work.

The Ram Memory WILL work.

The SMPS MAY work.

I state MAY because the Asus P4SD motherboard uses a 20-pin ATX main power cable.

If the last four pins of the 24-pin ATX main power cable that you have on your SMPS right now, Do Not remove, you can Carefully cut them off. Wrap them up, and out of the way.
If you need guidance on this I can help instruct you.

You need an IDE (PATA) harddrive, or a SATA adapter card to use a SATA harddrive.

So there you have it sir.
Regards,
joecoolvette

Nov 22, 2010 | Intel D101GGC Motherboard

2 Answers

How do i change the memory bus speed on my dell optiplex 170l? The CPU is an Intel Celeron 2.4GHz. The mother board processor speed is 400MHz and the Bios indicates a memory bus speed of 266MHz and does...


You checked in the right place as far as looking in the BIOS, however, memory and CPU sockets do not necessarily have the same buss speed. My FSB runs at 1066Mhz and my RAM at 800Mhz, it all depends on what type of RAM you buy as to the bus speed. You can up the bus speed on your RAM if you wish to reduce bottle-necking, but I've only done that a few times. In order to adjust anything, you must set the settings to manual. Be careful when you change this stuff around though, voltages must also be adjusted accordingly.

Feb 28, 2010 | Dell OptiPlex 170L PC Desktop

1 Answer

I am looking for specs for a dell motherboard e139765


Dell Bluford e139765 motherboard:
Chipset: Intel 845GL with ICH4 southbridge Socket: 478 CPU Support: s478 Intel Celeron and Intel P4 400/533 FSB (BIOS rev A04 or newer required for latest models) RAM Support: 2x DDR PC2100 128MB-512MB (non-ECC) Sound Card: Analog Devices ADI 198x Integrated Audio Form factor: Non-ATX LAN: Broadcom BCM4401 10/100
USB: 4

Nov 18, 2009 | Dell Computers & Internet

1 Answer

Asrock P4V8+ freezes after ram checking


Try going into the BIOS and selecting safe or minimal settings/options save and reboot. If this works go back to BIOS and make changes one at a time until it may not work again, then you will know which option is causing the system hang ups. My guess is also your motherboard is SATA 1 capable (1.5
gbs) not SATA 2, in which you could purchase a separate controlller card for your HDD. Good luck.

Jul 02, 2009 | Intel D865GBF Motherboard

2 Answers

Computer starts up then shuts off


make sure you pushed the ram ships in all the way.also make sure that you didnt unhook anything from the mobo when you opened your computer.

Feb 19, 2009 | MSI P4MAM2-V Motherboard

1 Answer

Compatible board for P-4


ok so its a 478 socket

best board available is an asrock P4I65g
Specification Value Product Description ASRock P4I65G - motherboard - micro ATX - i865G Product Type Motherboard Form Factor Micro ATX Dimensions (WxDxH) 24.4 cm x 19.8 cm Chipset Type Intel 865G / Intel ICH5 Max Bus Speed 800 MHz Processor 0 ( 1 ) - Socket 478 Compatible Processors Pentium 4, Celeron D RAM 0 MB (installed) / 2 GB (max) Supported RAM Technology DDR SDRAM Storage Controller ATA-100, Serial ATA-150 USB Ports Configuration 4 x USB Storage Ports Configuration 2 x ATA, 2 x SATA Graphics Controller Intel Extreme Graphics 2 Dynamic Video Memory Technology 2.0 Audio Output Sound card - 5.1 channel surround Networking Network adapter - Realtek RTL8101L - Ethernet, Fast EthernetView extended Specifications

Oct 18, 2008 | Intel D865GBF Motherboard

1 Answer

Upgrade cpu


According to the product website your board supports all intel socket 478 cpu's. Maybe you bought a faulty cpu ?
M266A
  1. Socket 478 for Intel® P4 processor
  2. VIA® P4M266A chipset
  • FSB 533MHz
  • Supports Hyper-Threading Technology
  • Hybrid Booster - a safe overclocking feature
  • 2xDDR 266/200
  • Integrated ProSavage8 3D Graphic
Socket 478, Intel® Pentium 4 / Celeron
- FSB 533/400MHz

Jun 22, 2008 | Asrock M266A Motherboard

2 Answers

Asrock P4i65G motherboard/CPU


Hi Rlforeard, yes the BX80546PG3000E is compatible with the motherboard P4I65G.
http://www.alvio.com/product_view.aspx?product_ID=61048&source_ID=froogle
Here is the list from Asrock. CPU's supported for the Asrock P4I65G board. You will find you can go higher.
http://www.asrock.com/mb/cpu.asp?Model=P4I65G&s=478

Good Luck!
Mike

Jun 02, 2008 | Asrock Computers & Internet

Not finding what you are looking for?
Asrock P4V88 (P4V88 RAID) Motherboard Logo

Related Topics:

1,273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Asrock Computers & Internet Experts

David
David

Level 3 Expert

778 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Computer Links

Level 3 Expert

2385 Answers

Are you an Asrock Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...