An expert who has achieved level 2 by getting 100 points
An expert who has answered 20 questions.
An expert that has over 10 points.
An expert whose answer got voted for 2 times.
Re: the box super help!!
Hi unplug the box and when you plug it back in press menu and then key in 1570 another menu comes up press nagravision and then key in these codes 00-- b0 b8 4f 04 e6 5f 87 80 01--a3 eb ec 07 d6 49 d2 eb press ok to store and then exit good luck
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
My set top box has setup menu, channels, autoscan to scan for channels. They changed some of the channels here after the original switch to digital, and a fresh autoscan was needed to again find the channels that moved. See if your box has autoscan for channels, and do it.
Try the recommendations in a document posted on the FCC site (http://hraunfoss.fcc.gov/edocs_public/attachmatch/DOC-291403A1.doc)
Also be aware the several stations have had problems with the transition. Some changed frequencies on which they were transmitting and encountered area coverage issues that didn't meet their expectations. They have been working with the FCC to remedy the problems and many stations have temporarily increased output power to compensate for the issues. Some of these stations may be difficult to receive and you may need to get larger antenna. If you are still having problems call the FCC DTV transition hotline at 1-888-CALLFCC (1-888-225-5322) or the TV station for advice.
hi unplug the box and when you plug it back in press menu and then key in 1570 another menu comes up press nagravision and key in these codes 00-- b0 b8 4f 04 e6 5f 87 80 01--a3 eb ec 07 d6 49 d2 eb press ok to store and then exit
Your ability to receive stations will be based on the the type of antenna you have. There are three typical types: a Yagi ( It is the traditional type) it is uni directional ; bi--directional; and lastly omnidirectional. Both the Yagi and Bidirectional need to be pointed toward the local ABC affiliate tower to receive signal this may result in loss of others channels at that time. Finally all antennas have a range that they are effective. Check the range of the antenna you have. If you go to www.antennaweb.org they can tell you the proper azimuth for pointing your antenna and they will give you a breakdown of the towers so you can see the specific tower you need to point toward to get ABC and if I remember correctly they give you the distance from your location to the tower.
If you have any questions post a comment to this solution. Hope this helps you.
The term pass through does not necessarily mean passive. What you could have is a switched pass through system. which basically means as long a power is on the signal is not acted upon by the device hence the signal passes through the box when the power is switched off the box stops passing the signal. if you want the signal to from the Sat box to the TV and bypass the DVR you could use a switch to do that (this is just a suggestion).