Question about Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
The suction power seemed to be deteoriating so we thoroughly cleaned the chamber, etc. Upon reassembly the suction seems ok when using the extension hose but the main vacuum still seems to not have as much power and there is a noticeable high pitch whine while vacuuming.
Where can I take my Dyson for service in Dayton, OH? Or do I need to ship it somewhere?
Most any vacuum repair shop will be able to remove the obstruction causing the problem
Posted on Jul 29, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I have finally fixed my sister's dyson dc 15 beater bar problem. It was just 2 tiny broken wires connect to circuit board lead to the beater bar. The wires broke where they go through the black rubber gommet. You need a torx screwdriver tx 15 to remove 2 plastic covers to access the wires. When looking at the front of the vacuum, the gray covers located on the right side of the vacuum. 1 big cover with a black rubber gasket and other small gray cover is on the rotating ball area.
This my new year resolution is to warn people not to buy Dyson vacuum cleaner ( Junk) design to break down! Shame on you Dyson!!!! Save your money find good old vacuum cleaner with metal parts.
OLD IS IN NEW IS JUNK!
Happy New Year!
Posted on Jan 01, 2009
Hi there, SmartAlec from NelsonVacuums.com.au . I have fixed hundreds of Dyson DC07 vacuum cleaners over the last few years and i would say there are 2 possible causes for the loss of suction.
1st is that the filter looks clean but is actually worn anyway. The way to tell is remove the washable filter from your vacuum cleaner. Take out the foam insert this seems to last longer that the other part. Hold up the plastic cage to the light and look at the white part (well it used to be white anyway) you should be able to see light through it. If you cant see through it you need to replace it. Here is a link to that filter for purchase . To verify this is the problem just run the vacuum without the filter in you should see an improvement - note do not actually **** up material the filter is there for a good reason.
2nd problem is that you have a blockage in your radix assembly. If you take off the whole dirt bin and feel the suction on the upright part where the chamber joins the vacuum (basically bypassing the radix) if there is good suction here you will either need to replace the cyclone top or dismantle and clean it. (it is very difficult to clean as it doesn't completely dissassemble)
Hope this helps - If you want more help send me a message
HAPPY VACUUMING ! :)
Posted on Aug 26, 2009
Tips for a great answer:
Jan 10, 2013 | Bissell Vacuums
Jul 27, 2012 | Shark Vacuums
Dec 12, 2017 | Dyson DC14 All floors Bagless Upright...
Jan 21, 2018 | Broan-NuTone CV450 Central Bagged Central...
Dec 13, 2009 | Dyson DC17 Animal Bagless Upright Cyclonic...
Nov 30, 2009 | Vacuums
Nov 03, 2009 | Kenmore Whispertone 23312 Bagged Canister...
Apr 14, 2009 | Vacuums
Mar 09, 2009 | Kenmore Vacuums
Jan 03, 2009 | Hoover U8171-900 / U8172-900 / U8173-900 /...
702 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: