Question about Siemens WXLP1460 Front Load

1 Answer

Machine blocks at rince cycle

I have a Siemens XL 1460 and lately it blocks just before the rince cycle. The only time it recently completed a cycle is when I let it run empty.

Posted by on

  • Anonymous Apr 05, 2009

    My machine will not rinse or spin. The wash cycle still seems to be fine but sticks once it reaches the rinse. Stopping the machine and putting on a seperate rinse or spin does not work either. Do you have any suggestions on what I can do?

  • Anonymous Mar 31, 2014

    the dispenser will not empty even though the cycle has completed

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,462 Answers

Running empty or full makes no difference. problem may be not draining to test this, put some water in appliance from a jug then start the cycle. (first action is to drain) see if water disappears. get back to me if you wish

Posted on Apr 03, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ewf1090 washing machine stops at the rince cycle and stops the timer just counts down to 1 minute and never completes the cycle


problem program board or switch system
have a technician test / replace problem board / switch

Feb 24, 2016 | Washing Machines

1 Answer

Water not going to the rince compartment


YOUR TUBE IS BLOCKED THAT RINSES INTO THE COMPARTMENT

Dec 27, 2013 | Maytag Neptune Washing Machines

1 Answer

Will not rince at end of wash cycle


If ur machine have additives cycle, check whether the solenoid valve (for opening water inlet to the additives' tray) is working or not. You can check this by listening to the sound of water during additive cycle. If it is not working, you have to replace the water inlet valve unit.

Nov 19, 2012 | Bosch Washing Machines

1 Answer

Washer skips spin cycle


You have an issue with the controller on your machine. Needs replacement.

Sep 17, 2017 | Maytag Legacy Series Top Load Washer

1 Answer

Floods floor when on rince cycle Program Bed andBath. Fault intermittant


If you didn't flood the floor when the washer emptied on the wash cycle, it is more likely that you have a partially plugged up drain than a malfunctioning washer!

Has you drains been cleaned lately, being the spring time you might have a root problem partially blooking the drains.

Watch you washer, if the washer flushes the water down the drain line it is working. If the water comes over the top of the drain line, then you have a slow drain.

Jun 01, 2011 | Washing Machines

1 Answer

Couple of years old . not old. Recently stopped completing cycles. seems to happen after the washcycle or rince, not sure. Need to manually turn over to spin and re-start machine. help!!


Be certain BOTH fill hoses are turned on. What happens is hoses get reversed, and someone turns off the hot water (which is connected to the cold inlet) and the machine needs cold water on rinse, so it will JUST STOP and wait happily forever. Both taps on and then check for reversed hoses.

Mar 31, 2011 | Washing Machines

1 Answer

I have an older maytag commercial washer . The motor hums when it is ready to spin after the rince cycle. If I lift the lid immediatly and wait about 2 minutes, then close the lid the machine starts and...


The lid activates a micro switch. If it is not pushed down properly it waont spin. This switch is meant to inhibit the spinning process for safety reasons.

Jan 03, 2018 | Washing Machines

Not finding what you are looking for?
Siemens WXLP1460 Front Load Logo

Related Topics:

618 people viewed this question

Ask a Question

Usually answered in minutes!

Top Siemens Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1474 Answers

Marvin
Marvin

Level 3 Expert

81423 Answers

shaun taylor

Level 3 Expert

1527 Answers

Are you a Siemens Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...