Question about Sanyo VWM-900 VHS VCR

1 Answer

DVD Player/Video Cassette Recorder

The minute the power button on my player/recorder is turned on to record or play,moving lines appear across the picture. this happens with new dvds/tapes or while recording/replaying a program. it happens on both, the vhs as well as dvd player part. Can anybody help? Thank you.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert whose answer got voted for 20 times.

  • Expert
  • 50 Answers
Re: DVD Player/Video Cassette Recorder

Hi It sounds like possibly there is stray RF getting into your video signal from your DVD/VCR combo to your tv. Check that your cables are ok, but also, if you can, try moving the unit in relation to the tv, if it is underneath, try putting it on top or beside the tv, I've seen the effect you describe be cause by lack of sheilding in both the tv and DVD/VCR, and moving the unit could cure it. Good Luck!

Posted on Apr 04, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

8mm JVC tapes put into a VHS tape that will play on a combined TV and VCR. Please, please, I need your help! Found tapes from 15 years ago.

You need an 8mm player or the camera that recorded the tapes. Connect the video and audio from the 8mm player/camera to a VHS recorder. Put the 8mm on play and the VHS on record.

Jan 08, 2015 | JVC P-6120JDU Video Cassette, 8mm 120...

1 Answer

VCR ejecting my cassettes

Try removing the top cover & have a look to see what happens when you put the tape in & press play/rewind etc. Is the take up spool (right hand spool) turning properly or is there slack tape not being taken into the cassette? Are the heads spinning ? I think your problem is more likely to do with the tape not travelling smoothly around the tape path. Possibly the clutch gears need cleaned or the soft brakes may not be dis-engaging properly.

Jul 19, 2009 | VCRs

1 Answer

Sony DVD Player/Video Cassette Recorder

need make and model, most of the time you can just connect to line output og vcr to line input , has to be a dvd recorder not just a player.

Oct 23, 2008 | VCRs

1 Answer

Dubbing from vcr to vcr

Connect with RCA cable to RCA jacks\plugs::
output [player] audio to INPUT [recorder]
OUTPUT [player] Video to INPUT [recorder]
Place blank tape in RECORDER, Tape that you want to record from into PLAYER.Press Record [recorder machine], wait one second, press PAUSE.( thats to give record tape "breathing" space.) Set up your player tape to start playing. When you know what you want to record, press PAUSE again to begining recording. Press PAUSE after the recorded section to install 2nd tape, etc. etc.
NOTE:: some VCRs use PAUSE 2nd time to release and continue recording, while some machines you must press RECORD button again to release PAUSE. you must expirement before begining your project.

May 24, 2008 | Zenith VCS442 VHS VCR

1 Answer

VCR, DVD, TV Connection

first let me say that a dvd player and a dvd recorder are different. the dvd player can only play dvd while a dvd recorder can both play and record dvd that is said. what i understand from what you write is currently is - out of your tv box into your dvd player then out of your player into your tv........ ok some dvd has two connections. line one and line two if your tv box is in line one then you should plug the rca cable in line two in. then you select line two on the dvd player then plug the other end to your vcr in line out so that is out of your vcr into line two of your dvd player.(some times one of the connection is at the front of your player hidden) if your dvd player only have one connection then you would have to plug out your tv box and replace it with the vcr cable and when you finish coping your vhs tape you plug in back your tv box to your dvd player. hope i could help.......... Tracy

Apr 02, 2008 | VCRs

1 Answer

Recording Problems


Most tv sets with freeview built in do not allow you to record it.
Check your tv instruction manual to see if it is at all possible.


Feb 09, 2008 | VCRs

2 Answers

DVD player /video cassette recorder

pull your head out of you *** and clean the heads

Dec 14, 2007 | VCRs

Not finding what you are looking for?
Sanyo VWM-900 VHS VCR Logo

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sanyo VCRs Experts

Michael Houda

Level 1 Expert

8 Answers


Level 3 Expert

4502 Answers


Level 2 Expert

146 Answers

Are you a Sanyo VCR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides