Question about Watts Brass Pipefast Staple Gun Pipe To Wood Fast Easy

1 Answer

Powerfast staple gun works poorly

I bought the staple gun as a close out at the home center (this should have been a tip-off that it doesn't work well). It will fire, but it doesn't seem to have enough power to fully seat in the softest wood. For professional use, if it doesn't work flawlessly under the most severe conditions, it's worthless!

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Gun is most likely a multi strike gun. Try not moving the body of the stapler and pushing the strike lever again, repeat if necessary.

Posted on Feb 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just bought TR110 staple gun and no staples are firing out


check the spring,. also there must be something lodged in it... look closer..
Ck

Feb 13, 2011 | Powerfast Stanley TR110 Light-Duty Staple...

1 Answer

Bought 5/16 8mm staplescannot get to fit in channel so stapler can beused


This gun uses the T-50 style staples. It uses Heavy-Duty, Narrow Crown Staples.

Jan 06, 2011 | Powerfast Stanley TR110 Light-Duty Staple...

1 Answer

How do I load my manual powerfast staple gun? Pictures?


Howdy, I don't have pictures, but that model is loaded from the bottom (not the back,as one might expect) while the plunger is pulled to the rear then pushed back in once the staples are laid in the track on the bottom. Handy once you get used to it:)

Regards, Farmerbear

Sep 08, 2010 | Desa International Powerfast Heavy Duty...

1 Answer

I have a PowerFast staple gun #31600. Can not


I got some staples stuck in my Powerfast 31600 too. I THOUGHT they were the right staples, I was wrong. You have to bend a little tab on the bottom of the stapler to let the slide come out of the back. Then you can remove the staples. Replace the slide and tap the tab back into place with a punch.

Oct 01, 2009 | Powerfast Tools & Hardware - Others

3 Answers

Powerfast strap gun for romex misfiring


just a try spray with a generous coat of pb blaster while firing a few then follow with a good coat of household oil then oil before using just something to give it a try

Nov 17, 2008 | Tools & Hardware - Others

3 Answers

LOAD IT


pull out the spring at the end of the gun. turn the staple gun upside down. Lay the staples in the track pointed side up, push in the spring slide so that it locks. You are ready to staple.

Nov 08, 2008 | Powerfast Stanley TR110 Light-Duty Staple...

Not finding what you are looking for?
Watts Brass Pipefast Staple Gun Pipe To Wood Fast Easy Logo

162 people viewed this question

Ask a Question

Usually answered in minutes!

Top Watts Tools & Hardware - Others Experts

Marvin
Marvin

Level 3 Expert

82208 Answers

Brad Brown

Level 3 Expert

17473 Answers

john h

Level 3 Expert

17342 Answers

Are you a Watts Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...