Question about Kenmore 3.8 cu. ft. HE3 Front Load Washer

2 Answers

Dryer not heating he3 kenmore elite

Dryer does not heat

Posted by on

  • knightsrepai Dec 20, 2008

    he3 kenmore elite dryer not heating

  • Anonymous Jan 04, 2009

    where is the fuse

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My he3 gas dryer wont fire up and dry the clothes

Posted on Mar 21, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 91 Answers

Repl/ thermal fuse if no heat if heating for a little while clean exhaust, and repl/ coils

Posted on Jan 04, 2009

4 Suggested Answers

michiganfan9
  • 179 Answers

SOURCE: kenmore elite he3 dryer

take the bottom panel off the washer it is held in by two or three screws the heating element is off to the right

Posted on Dec 20, 2008

  • 16 Answers

SOURCE: kenmore elite dryer runs cold no heat

Most of the time its the thermal fuse part # 3390719

Posted on Jul 22, 2009

SOURCE: My Kenmore Elite (Whirlpool) HE3 elctric dryer is no

A dryer not heating usually means that either the heating element is burned/broken (open circuit); a thermal fuse in line with the heating element is blown or; a thermostat is faulty.

Dryer needs to be partially disassembled to diagnose with a multimeter.

Charlie

Posted on Sep 29, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

He3 gas dryer not heating


thee a lot compenents in the heat circuit it could be any one of them , starting with the thermal fuse,thermostat, safety valve ,glow bar, and flame sensor

Apr 30, 2014 | Kenmore Elite HE3 Steam 8674 Dryer

1 Answer

He3 gas dryer not heating


http://homeguides.sfgate.com/troubleshoot-kenmore-elite-gas-dryer-wont-heat-77443.html

Apr 30, 2014 | Kenmore HE3 Gas Dryer

1 Answer

Kenmore elite he3 electric dryer no heat


Do you mean the heating coil was replaced? or the thermal cut offs?

You might have a bad thermostat or heating relay.

Mar 25, 2014 | Kenmore Elite HE4 Electric Dryer

1 Answer

I have a Kenmore Elite HE3 model 11094834200 it heats up for about 5 minutes and than stops heating. I replaced the thermistor thinking that was the problem but it wasn't. If I try re starting t


Number 34 is the sensor strips located on the rear bulkhead inside the dryer. Clean them thoroughly with Windex or 409. Dryer sheets build a wax buffer on them sensors that moisture cannot penetrate. If no wetness is detected the control shuts her down thinking them clothes is did. Either that or you forgot to reconnect the sensor wire when puttin her back together Kimosabe.

Jul 10, 2012 | Kenmore Elite HE4 Electric Dryer

1 Answer

My kenmore elite he3 dryer has quit heating could it be the heating element and if so where can i find it on the dryer? The model # is 110.82822103 and the serial# is MR1751757


Hi,

If you are having problems with your gas dryer not heating the most common problem is that the ignitor goes bad. Even though it glows sometimes it is still not working properly.



if you dryer is gas check out this gas no heat tip....



If you have an electric dryer, you can have many different things that can go wrong causing the dryer not to heat.



check out this electric no heat tip...


heatman101
][][][][][][][][][][][][][][][][][][][][][][

Jun 05, 2010 | Kenmore Elite HE3 Steam 8674 Dryer

1 Answer

My Kenmore Elite (Whirlpool) HE3 elctric dryer is no


A dryer not heating usually means that either the heating element is burned/broken (open circuit); a thermal fuse in line with the heating element is blown or; a thermostat is faulty.

Dryer needs to be partially disassembled to diagnose with a multimeter.

Charlie

Sep 29, 2009 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

1 Answer

Kenmore elite dryer no heat


You may want to check if the heating element needs replacing. Most Dryers have 2 heating elements that are found by taking the back off, some of the newer dryers have 3.

Jun 08, 2009 | Kenmore Dryers

1 Answer

Drum turns...no heat


change the heating elament this is not hard to do it goes back the same way you take it out thank you for useing fixya
please rate me

Apr 19, 2009 | Kenmore Elite HE3 Steam 8674 Dryer

1 Answer

Dryer working but no heat


The manual says that two circuit breakers used,and that the dryer
can spin but no heat if one of them tripped, check your panel and see
if any breakers are tripped. If this was the problem,have an electrician
check the circuit.

Apr 09, 2009 | Kenmore Elite HE3 Steam 8674 Dryer

1 Answer

Kenmore elite he3 dryer


take the bottom panel off the washer it is held in by two or three screws the heating element is off to the right

Dec 20, 2008 | Kenmore 3.8 cu. ft. HE3 Front Load Washer

Not finding what you are looking for?
Kenmore 3.8 cu. ft. HE3 Front Load Washer Logo

712 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Ron Lankford

Level 3 Expert

5386 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

2mikecurtis

Level 2 Expert

65 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...