Question about Panasonic KX B09-V4 (KX-B09-V4) Network Adapter

1 Answer

Printer compatibility My kx-b09-v4 will work with a Brother HL-2700 whick is now U/S. It does not work with a Konica Minolta,which jeust spis out plain paper. Any suggestions please. Thanks in advance. Brian

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers
Re: printer compatibility

Is your printer doing the same thing when you perform the self test of this printer (usually power held down for 8seconds or press power on and print at the same time) will identify either a print cartridge problem or a driver install problem.

Posted on May 18, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Dell 2155cn

You can make your printer WiFi compatible by connecting it to your wireless modem/router using the Ethernet port on the back of the printer, if the printer is located within a reasonable distance from the modem/router. The cost of an Ethernet cable (even a longer one) is probably less than the cost of the wireless adapter (I assume you have not bought the adapter yet).
To find out if the wireless adapter is compatible with your printer, you can call Dell technical support (for the printer or the adapter).

Hope this helps.

Jul 01, 2014 | Network & Wireless Adapters

1 Answer

Connect brother mfc-j430w printer

CLICK HERE for the support page on the brother website, for that model printer. If the WiFi network you see in the printer network setup, shows a lock, you merely need to continue the network setup and enter the WiFi password (passphrase), for it to connect. You do need the correct password to succeed. Also you can only use one network connection type, at a time. Either WiFi or network cable, not both. Dosconnect any usb cables to be sure.

Sep 25, 2013 | Buffalo Technology Wireless-N Nfiniti ...

1 Answer

I have an old Power Mac G5 WITHOUT wireless capability. Just bought a Belkin F7D2101 Surf & Share Wireless USB Adapter. But I can't seem to find a driver for Mac. Is there a solution?

Belkin surf is not compatible with any versions of Mac osX...Take it back to stores...

The list of belkin adapters that supports MAC OSX are...
buy any of the following models...
f5d9050 v4
f5d6050 v2
f5d5055 v1 & v2

Feb 06, 2011 | Belkin Surf Share Wireless USB Adapters...

1 Answer

Looking for a MAC driver for my F7D4101. The F7D8302 allows MACs to access it, so I bought it's little brother, the F7D4101, thinking I wouldn't have any issues. I need this to work with my MAC, please...


You are trying to install F7D4101 in your mac computer , which is not possible because its not compatible with Mac computers

There is no drivers for the Mac OS for this F7D4101 wireless adapter , its compatible only with Windows XP, Windows Vista, Windows 7

Thanks & Regards,


Dec 31, 2010 | Belkin Play Wireless USB Adapter (F7D4101)

1 Answer

Is there a Driver for LinkSys WMP54G V4 drive for Windows 7 32Bit?

There is but it is laggy and slow. The latest vista patched driver work's much better surprisingly. Try it out!

Sep 10, 2010 | Linksys Wireless-G WMP54G 802.11g/b

1 Answer

How do i get the lexmark x4975 working wireless

When setting up a Lexmark printer for wireless use, you must initially have the printer connected via USB. Once setup is completed, then you will have wireless access.

Jun 07, 2010 | Lexmark X4975 3-in-1 Wireless Inkjet...

1 Answer

Networking printer issue

vista open devices & printers add printer connect direct via cat5 patch power cycle lexmark

Nov 16, 2008 | Lexmark (13A0288) Network Adapter

1 Answer

Connecting my Brother MFC 440cn printer to the internet

It turns out my dad had the usb cable plugged into the ethernet port instead of the usb port. It works fine now.

Thanks for the response.

Oct 26, 2008 | Network & Wireless Adapters

1 Answer

Setting up my mfc-440cn brother

Im guessing the "Brother" is a printer....the Printer should connect using a usb port, Unless its an ethernet port for the printer then you will need a router to connect both printer and computer. Are you using a High Speed connection or a dial up connection?

Nov 17, 2007 | Network & Wireless Adapters

Not finding what you are looking for?
Panasonic KX B09-V4 (KX-B09-V4) Network Adapter Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Network & Wireless Adapters Experts

Martin Murray

Level 3 Expert

1614 Answers

L Pfaff
L Pfaff

Level 3 Expert

11572 Answers

Level 2 Expert

81 Answers

Are you a Panasonic Network and Wireless Adapter Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides