Tv built-in dvd player wont play thru surround sound
My built-dvd player wont play thru my surround sound system. I've tried connecting component cables from tv to receiver. Also I tried connecting regular av cables from receiver to tv. I used the dtv and dvd slots on the receiver to connect using av cables. Am I missing something.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Ok...sorry it took me so long to get back to you...Check the back of you tv and look for RCA jacks for audio and video out...There should be a yellow one for video..a white one for audio left(L) and a red one for audio righ(R)...you may not need the yellow one...now look for any inputs on the rear panel of the surround sound system...They can be marked (AUX)...they will work..once all of these are located...you will need an RCA patch cable long enough to reach from the tv to the surround sound receiver...once done...turn on the tv and the surround sound.With the remote from the surround sound remote...switch between the input sources..maybe (AUX) until you hear your tv sound come through...then you adjust the sound as needed...Assuming the DVD is built in to the surround sound system...your DVD sound will come back when you play DVD's...All connections and cables are color coded so you should have no problem connecting everything....Good luck....let me know how it goes,,,,I hope this was helpful....PEACE.....
Hi, If I understand correctly form your question,you can not hook them unless your TV has 5.1 surround sound amplifier built in...Does it ? I doubt so.. in order to get a surround sound from your TV you need a 5.1 /7.1 DVD/Receiver and you can connect your TV to listen it thru Receiver ..Here is how you can do it.. ** connect "Audio Output " as either :"2xRCA jacks"or "Optic cable output" or "HDMI "connector " of your TV , ** to "RCA input jacks " or "Optic Cable input" or if you have "HDMI input" of your DVD/ Receiver ** than just switch to
respective mode on Receiver corresponding the connector you have used on the back of Receiver ..
There you go..your Tv sound are on the DVD/receiver as SURROUNDING SOUND. By this means ,whatever you watch on the TV will come thru your Receiver
Hope this helps!..if more help requires pls let me know. Take care and please Remember to rate/vote for us to continue for Helping out the Community :)
Hi,here is my simple solution... To listen your TV on your samsung ps wx30 surround sound system ,
** you need to connect "Audio Output " RCA jacks or "Optic cable output" or "HDMI out " of your TV unit ** to "AUX input "
or "TV" OR "Any input" of your dvd player or "Optic Cable input" or "HDMI input" ** than just switch to
respective mode on dvd player corresponding your RCA or Optic connection or HDMI .. . There you go..Your TV sound is on the dvd player By this means whatever you watch on the TV (tuner, satellite , Xbox , etc..) ,it's sound will come thru your dvd player.
Hope this helps!..if more he?p requires pls let me know.. Take care and please Remember to rate/vote and give me 4 Thumbs Up for me to continue for Helping out the Community :)
This is how the connection is suppose to be, DVR "OUT", to TV "IN" using the RCA plugs, then press AV on the TV. If this is how you connected it, then maybe there is something wrong with the video wire (Yellow).
As for the DVD, you need to connect an Audio wire separately because the component Red + Green + Blue wire only stands for video. Audio is Red and White, this must be connected for you to get sound from the DVD.
To connect the Audio for your DVD player, connect Red and White wire to Audio "OUT" of your DVD player, to "AUX" in of your AVR 146 receiver, then select AUX on your receiver and sound will come out from your DVD through the receiver.
I hope this is not complicated for you. This connection is simple, all you need is to understand the basics which is OUT and IN. If you want to watch DVD on your TV, this means the DVD will be good OUT to IN of the DVD. The same goes for audio.
If you don't understand, please let me know so that I can direct you further.
Depending on if your surround system has a hdmi input or not. if it does you can connect the blu-ray player to it. If it doesn't have an hdmi input you will have to run the hdmi cable from the blu-ray to the tv then run a set of rca cables (red and white plugs) from the tv audio out to the surround systems' audio input jacks to get sound through the surround system. Most surround systems don't have an auxiliary input for another video device.
1. Connect cable to cable HD DVR box, connect video out of cable box to Sony receiver TV video in, connect audio L and R out of cable box to Sony receiver TV audio in and connect TV out of receiver to video in of Panasonic projector
2. Connect Audio and Video out of DVD player respectively to DVD in of receiver. Good Luck :)
The dvd player is responsible for reading the surround sound track, and sending it to the receiver. First make sure you are playing the surround sound track on the dvd, many have a stereo track too. Next, try another dvd and see if you can play surround sound on that one. If you can't play surround on ANY dvd I would start looking at the audio connection from dvd to receiver. Are you using an optical cable? Red, white, and yellow RCA cables? Optical will transmit any sound over only one cable, RCA cables need one cable for each channel (LF, C, RF, LR, RR, sub.) If your connections are correct, is the receiver set to play a surround sound track? Is it set in 2 channel mode?