SanDisk Cruzer Every time I plug- in my SanDisk Cruzer micro 16GB won't do anything. My computer does detect it, but when I open it shows nothing, Compleatly Empty. All the data that was already in the SandDisk when I bought it is gone as well. The thing is it was working fine

Try a different USB device on each of the USB ports on your computer.
Hopefully, all your USB ports are working correctly.

Try a different USB port on your computer.
Hopefully, the SanDisk will be detected on one of the ports.

Try a USB port on a different computer.
If the SanDisk still is not detected, then spend $10 to buy a new 4GB flash-drive.

From the SanDisk website it says Win2000 and WinXP certified. It says nothing about Win7. try it in a different pc with Xp and see if it works. If it does then it is not compatible with Win7

Just to make sure, try connecting it into another computer (but not in Radio Shack), if the device gets detected by another computer, then you need to try enabling the USB Legacy Support of your computer.

But if the other computer does not detect it, then you need to take it back to Radio Shack and verify with them if there's any additional driver or firmware upgrade that would help you to detect the SanDisk.

Have a good day!

It is likely an issue with the filesystem. The FAT filesystem gets easily corrupted. If that's the case, reformatting it with FAT32 should help. But remember - reformatting erases all the data, so don't do it if you have anything important on the drive!

Actually, your laptop hasn't detected your flash drive. Please make sure all of your software on the computer is completely up to date. Next, try plugging the flash drive into a different computer to see if it shows up. If it doesn't show up on a different computer, then try formatting it. Once formatted, try again. There is a possibility that the flash drive has gone bad, but just take things one step at a time.

Start at the beginning. Look at how you entered your password and retrace your steps.

i have a 16 gb pendrive which is detected in my mac but not in any windows...............help me out here

Dont worry about being prompted, that is an OS option and you may of turned off by accident. When you insert the flash drive into your USB port, does th elight on the drive ligh up? If not your flash drive may of gone bad.

If it does light up, click on "My Computer" and see if it shows up there.

Strange... Vista does seem to have a problem with everything Sandisk...

Anyway, this should be all you need:

Launchpad Installer

Launchpad Uninstaller

my sandisk cruzer micro 1Gb flash drive was not working for a month while i was copying 5o nos of photo on it.If i plugged in my device my pc getting hanged and the flash drive was not detected, please give me solution.....