Question about AMD Chaintech ZNF3-250 Socket 754 Mainboard w/ 7.1 Audio, SATA, GigaLAN, Firewire (MBSK754CHZNF325) Motherboard

1 Answer

Pen drive is not able to write any data

Hello,

This is Rajnish here, sir i'm having problem with my 8 GB pen drive. The problem is, when i insert my pen drive my system detects it properly. but when i transfer any data to the pen drive, it shows copying the file but as 2 or 3 progress bar moves, it suddenly shows an error "the file or path is not correct, make sure you've given the correct path". Now when i check the property then it shows "used space 0 Byte And Free Space 0 Byte". When i format the pen drive, property shows "7.65 GB is free and 0 Byte" used. And Again when i transfer the data to the pen drive same problem occurs. There is no problem with da pendrive cause i checked it on other system it works properly (Write the data as well as read the data). I'm only able to read the data with the pen drive on my system only if the data was written on other system.
I thought there would be problem with my operating system files or driver so i formatted my full PC and repartitioned but no change. And when i insert any other pen drive to my PC, it works properly. I also checked the pendrive on other USB port available in my system but still i'm getting the same problem.

My system configuration:

OS: MS Windows XP Pro Service pack 2.
Processor: AMD athelon 5000+
Motherboard: Asus A8N-MX
File System of hard Disc: NTFS
File System of pen drive during and after format: FAT32

What would be the reason causing this problem and if there is problem with hardware settings then please let me know the solution.

I'll be thankful of yours.

-
Rajnish

Posted by on

  • Cpsbhanu Jan 02, 2009

    Dear Rajnish I too have aproblem with my 4 GB Transcend Pen drive, it is slightly different than you stated. Under properties it shows used space 0 and free space is also 0, I even tried to format scan, but in vain nothing works.

  • Anonymous Mar 21, 2014

    I have a 64gb lexar flash drive
    It will not accept anymore than 1.46 gb per file Doesn.t matter how many files they all stop at that spot.There is lots of free space left Any ideas

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 85 Answers

Your pen drive is corrpted........kindly replace your pen drive from your saler.

The best earn money site..plz signup free
http://bux.to/?r=jiteshright
(Join now and receive a $0.05 Sign-up Bonus)........click on it........

Posted on Dec 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

THE TRANSCEND JF V30 /64GB PEN DRIVE NOT OPEN, WHEN WE INSERT THE PEN DRIVE WINDOW ASK FOR FORMATING EVERY TIME


The pen drive's formatting is corrupted. You must format it if you want to use it again. If the problem persists the drive is faulty and should not trusted to store valuable data.

Dec 21, 2010 | Motherboards

1 Answer

Hi. My comp uses Asus P5KPL-AM/PS motherboard. Two weeks back while copying some files 2 my pen drive, suddenly the device stopped working. Whenever i insert the pen drive, it would show 'Unrecognised USB...


there is a corruption in your pen drive...try to connect to some other PC/laptop and if working there format it and then use in you PC....
pen drives are very sensitive to shakes and shocks....we misuse pendrives by rough handling....so they will get corrupted often...
i suggets use a re-writable DVD disk of say 4.7 GB insted of usb stick ....it costs less and also does not get infected by virus....
i have stoped using mem sticks....i use DVD RW disks....

Nov 01, 2010 | Motherboards

1 Answer

Hellow sir, I am mahesh. I have transcend 4GB pen drive (JF V10). My problem is, When i connected pen drive to my pc then it could not start but it was shown in my computer as a removable disk and...


its just simple MAHESH...

1st if your pen drive has no data inside.. don't hesitate to reformat it.. then try again..

2nd check the device manager on your computer if the pen drive of yours was updated with its USB port.. just look for the UNKNOWN DEVICE in the USB port in the bottom of the device manager..

if there's no name of UNKNOWN DEVICE it means you must go to the settings of your pen drive..

just right click your pen drive then properties,, then look for the AUTO PLAY then select the action to perform..

then apply and ok... now close all documents then go to my computer and right click your pen drive and click the AUTO PLAY if its work... restart your pc... then its done... ^_^

Oct 18, 2010 | Motherboards

1 Answer

Hello sir, i have a pen drive of brand trancende 8GB , its write data on it but not shown in other computer but it occupie space .... pl. solve it . how can i use it for proper use ... AJAY SINGH -...


control panel admistrive tools,computer management,device manager scroll down universal serial bus controllers or network adapters you should see a yellow question mark? right click to reinstall drivers
hope this helps

Oct 02, 2010 | Motherboards

1 Answer

I have one 32GB Kingstone Pendrive & I have store on a data of above 1 gb but When It reconnect to PC it's show the only empty folder, so please send me solution of the same...


It’s difficult to give you an exact fix without having your pen drive in hand and at a computer, but I will give you some things to check for:

1) Does the pen drive have a read – write protection enabled? If so turn it off.

2) Make sure your windows explore has the folder view options set so that you cans see file extensions. This will definitely come in to play if the files on your pen drive are not common files. e.g. (ms word)

3) No the bad news!!! There are many reports of the 32GB Kingstone pen drive being FAKE. If you do a google search you will see many consumer complaints.

Respectfully,

David
fix4mypc

Aug 07, 2010 | Motherboards

3 Answers

My pen drive is not working problem in ic iwant my data recover pls help me. pen drive is kington 4gb purple clour


If your pen drive is not detected by your pc or any other pc. Then your pen drive hardware or chips are damaged. There is no way to recover data from it.
Or If the pen drive is working but not showing your data try Data Recovery Software like steller,recuva
download from here
http://www.stellarinfo.com/
http://www.recoverybull.com/
http://www.datarecoverysoftware.com/
http://www.filehippo.com/download_recuva/
http://www.filehippo.com/download_macrium_reflect/

You can further contact me or thanks me on my email id ejaz89@live.com

Aug 05, 2010 | Motherboards

1 Answer

Sir my Pen drive(kingston - 1 gb)does not open on


sounds like you need to install USB drivers

Jul 06, 2010 | Motherboards

2 Answers

In my pc when i insert a pendrive the data in it is not copying into my pc it shows file is corrupted but in it there is no virus.the pen drive is recognized and it shows the data but during copying to pc...


If the pen does that in all pc's then the data is truly corrupted and nothing you can do will fix that. Format the pen, put more data on it and try to read it. If the corrupt message appears again then the pen is dead, junk it.

Jun 23, 2010 | Intel Motherboard

Not finding what you are looking for?
AMD Chaintech ZNF3-250 Socket 754 Mainboard w/ 7.1 Audio, SATA, GigaLAN, Firewire (MBSK754CHZNF325) Motherboard Logo

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top AMD Motherboards Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1042 Answers

yadayada
yadayada

Level 3 Expert

61215 Answers

Are you an AMD Motherboard Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...