- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Without a schematic or service manual it would be a guessing game at best. I would go onto the internet and just enter "need service manual for [make, model,etc] and you should be able to find a free download of the service manual from several sources. One of them will more than likely have the information you need on it. I wouldn't try guessing you can find it on the internet somewhere. Most of the time you can download an entire service manual and print it out for free. Gillight
Hi from retired Englishman in SW France,
You will need to type into your search engine/web browser '(make model number) washer manual' and you should be presented with a number of sources from which you can either download for free or have to pay a nominal amount.
You could also try the manufacturer's web site direct ;-0)
If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
ok, have you checked for power at the power point? if you have power to the machine and the display doesn't light up after you have turned the power point on then your control module is faulty. only the phase 5 models don't power up if the pump is faulty, your machine is a phase 2 with a blue control module. by the way, what part of the machine did you pull apart? i think your pump was faulty which made the control module faulty. check the pump for a burning smell. if it is burnt then i"m sure your module is too. please reply if you need more help to fix this problem.please turn off the power b4 you work on it, don"t want any accidents . good luck.
f1 means u have a leak where pump and control module is. that is located under sump.the water has activated a flood switch near drain pump. need to find leak to fix problem. make sure power is off to unit b4 looking.please reply to how u go. good luck