COST OF THIS - Hoover F5520 SteamVac Duo Upright Wet Washer

Probably by replacing the strip - it is open. Cost of part may be more than entire unit and not be cost effective to repair.

Replacement cost for comparative model depends on how old the model was. A newer model may not be near the same as an older model.

https://www.amazon.com/gp/product/B01CT85AXW/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

Buy a new one. Motors cost almost as much as the unit.

I've got a better idea to help you repair your vacuum that needs service! Do it yourself rather than pay through the nose at a Dyson repair shop between the cost of labor and the cost of parts, it'll cost YOU A LOT!

Crucial Vacuum manufactures parts (filters, hoses, belts, etc) that fit the Dyson for typically 1/3 of the price & they have free shipping. They also have how-to videos on youtube to help you replace the part!

If you have questions, visit <a href="http://www.crucialvacuum.com/">Crucial Vacuum</a> or email them at [email protected]

Well, if it is 'broken', there are stores that repair them. If it was an expensive vacuum it may be worth checking out how much the repair will cost. Then, you can measure the cost of repairing or purchasing a new one. Most repair centers will not charge you for the repair estimate of cost. Look in the yellow pages or online for Sew-Vac stores or vacuum repair for a store near you. Good Luck!

There is NO reason why not. But usually the cost of transformers is quite high.

Brushes not moving are usually caused by the turbine bearing seized. This job requires the turbine to be removed, completely dissassembled, cleaned new bearings and then re assembled and installed. The tank is another part, if your tank does in fact need replacement then the normal cost is between 45-60 dollars. Even if he completely replcaed the turbine, those cost about 35-45 dollars. I do know that the new tank style (all clear) is made much better than the original (2 color). This model is a good one. you are getting to the 50% of cost for a new model. if you get this one fixed make sure they install a gasket under the turbine, to prevent further issues.

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_b96ba3f038cf317c

you can find used models fairly cheap. i have one we paid about $60 for. look around the internet in places like craigslist or ebay.

If you call dyson at 1-866-693-9766 they will give you a list of locations near you. And if there aren't any locations near you they will help you arrange to ship it directly to them(don't know about the cost of shipping it though). Good luck.