Question about Storage Controllers

2 Answers

Installing Optex Memory Card Reader

Dear Experts

I have an Optex Memory Card Reader OSDRDR that fits in the USB Port. I have Windows 98SE. Running the installation on it's own Windows 98SE cannot find a driver. There is the other option of selecting one but I don't know which one, and have been warned by clicking a couple that the driver does not match the device and it might not work correctly. I visited the mfr. website.
www.gentec-intl.com and saw under ''Support'' there were Drivers for Windows 98. So, not knowing if that was the ''fix all'' for both versions of Windows 98, I tried, and from the log report- it said: ''Setup detected an incorrect version of Windows.'' And there were more errors and problems throughout the rest of the report. -Installation was unsuccessful. So, my question, is there a driver for this device, either somewhere in Windows 98SE- and how would I find it and install it- or is there one the web, and where might that be?

Thanks

~ Frustrated

Posted by on

  • 1 more comment 
  • Inez Wallace Mar 05, 2009

    i just purchase an optex card reader and the sales clerk at the store just said plug it into your usb port put the card in the my pictures from my card will appear , this did not work what am I doing wrong

  • Anonymous Mar 25, 2009

    WILL NOT RECONIZE THIS READER..WIN 98SE

  •  Elva Cartwright
    Elva Cartwright Feb 27, 2013

    I tried down loading picturwes from the card and it won't do it, I wonder why?

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 187 Answers

You should email the company and ask about this specifically. Sometimes the drivers they show don;t work or require something else to be loaded, such as a specific .Net framework version.

Posted on Dec 31, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a possible solution, so simple but took me 5 hrs to figure it out. Plug in your optex, go to control panel and click 'add hardware'. The wizard will add and the pictures popped up right away. Duh!

Posted on Feb 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm running windows 7 32bit and want to install a SATA port expander but there are no instructions on doing it without makeing the a RAID aray.


You should have posted the model of what you want this on, usually the reason is to add RAID so its faster.

You could use USB 3.0 ports for your drives and get the same speed you will get from Sata 2 using HDD.

Try just plugging it in, run windows update, then go to ADMIN tools, computer MGNT, storage, disk MGT, see if you can see the added storage, then just Look for the unpartitioned HDD usually represented by a black header
right click it and select format.
on the following instructions

Feb 23, 2013 | Vantec UGTST310R PCI Host Card 6 Port 4...

1 Answer

I put my sd card into driver and the computer dosnt seem to recognise it can you help me


Make sure you have the driver installed for your memory card reader.

Mar 14, 2011 | Storage Controllers

1 Answer

Question mark at mass storage adapter it says no driver installed. for gateway mx6453


There are a few drivers that may need to be installed.
Click Here to go to the download page for your model.
Once there, bookmark the website, as you may need it in the future.
Second, download the "Chipset" driver - install it by double clicking on what you downloaded, then after it finishes installing - reboot your computer. (THIS SHOULD FIX IT)

Check to see if the problem is still there.. if so, try the following drivers from that website:
Card Reader Driver (TI 2.0.0.9)
Card Reader Driver (Gateway 2.0.0.2)
Memory Card Reader Driver (Gateway 1.0.3.2)

Feb 23, 2011 | Storage Controllers

1 Answer

How can I get the usb memory stick to work on my computer? I have been using it for awhile and leaving it in place and it lights up occassionally now, not all the time as before. The computer does not show...


no to the firefox question. try the stick in a different usb port to make windows "relearn" to read it. if it won't it may just be failing (going bad).

Sep 13, 2010 | Storage Controllers

1 Answer

1 WANT INSTALL A PNY USB CARD READER WRITER, A DONT HAVE ANY DISK HOW CAN I DO THIS?


you should not need any drivers. just plug the card reader in an available usb port on your pc and you will be ready to go.

Jan 27, 2010 | PNY USB SmartMedia Reader PC (SFRUSBWB)

1 Answer

Usb 2 card is only working at low speed after reinstalling windows xp. How can I get it to go to high speed? NEC 4 Port USB 2.0 PCI Controller Card


Make sure that you have the proper driver installed for your USB interface. Your motherboard should have come with a CD, or you can go to the motherboard manufacturers website and download the latest chipset drivers.

Once they are downloaded, install them and re-start your PC. Windows XP will then recognize a whole set of new components and allow your card to run at higher speeds.

You are looking for the PCI Bridge driver in particular, but I would recommend installing ALL the drivers that are available from the motherboard manufacturer.

Jan 22, 2010 | SYBA (SD-NECU2-3E1I) (SD-NECU2-3E1I) USB...

1 Answer

Can't read SM 128 card on Vista or XP


The solution was that the SmartMedia card I was using seems to have been corrupted. It works perfectly well in my device to record music, but cannot be read through either of my computers. However, another SmartMedia Card does work and I have been able to download files, so it must be the card. The manufacturer of the MRS-4 recording device, ZOOM, say that they know of no way to repair the corrupted card.
Best wishes,

Nov 15, 2009 | PNY USB SmartMedia Reader PC (SFRUSBWB)

1 Answer

Trying to trainsfer program from my computer to the tevion memory


Place the flash drive (mem stick) into the USB port of the computer. Copy the files to it. Remove it from the computer and put it into the USB port of the other computer. Copy the files from the flash drive to the computer hard drive.
The memorystick (flash drive) will show up as another disk in File Manager/Windows Explorer, and disappear when the device is removed.

You cannot transfer already installed games from computer to computer, only the files. The game must be installed from the original CDs in order to function.

You can transfer documents, music, pictures, etc.

Jun 12, 2009 | Storage Controllers

1 Answer

System freeze


The issue was resolved by uninstalling SP3. I uninstalled SP3 and the USB PCI card and rebooted. When SP2 reinstalled the device it installed the corect driver (5.1.2600.2180) and everything is now functional. Have no idea why the correct driver was not in XP SP3.

Jan 24, 2009 | SYBA (SD-NECU2-3E1I) (SD-NECU2-3E1I) USB...

1 Answer

High speed usb port in a emachine 350


That is really a question for them. Differetn system will support different devices. In most cases, adding a USB 2 card will work with almost any system that is not over a few years old.

Dec 28, 2008 | Koutech Systems Koutech I/O Future PU320...

Not finding what you are looking for?
Storage Controllers Logo

Related Topics:

2,556 people viewed this question

Ask a Question

Usually answered in minutes!

Top Storage Controllers Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Robert Graf

Level 2 Expert

156 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Are you a Storage Controller Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...