Question about Pioneer SD-582HD5 58" Rear Projection HDTV-Ready Television

1 Answer

Pioneer SD-582HD5 - screen went black, no sound, Poor remote feed

12-19-08. Two months ago the blue tube started getting brighter, and then going back to normal. Two weeks ago it was doing the same thing then suddenly the picture went black with a loud POP!. We shut the unit down, waited five minutes and turned it back on. The picture came back up, no problems. This repeated three more times over the next few days (Black with a POP). Now the screen is fine, blue tube has'nt fluttered in a while, but since the last POP the tv functions via the remote control are hard to change (i.e Channel changing, screen selection, volume control etc.). I'm wondering if the last POP may have damaged the ir control for the tv. The signal goes flawlessly through the tv to my other components flawlessly, but the inner tv functions are slow to respond. What do you think? How to fix?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

The blue tube might be leaking coolant in the high voltage area, that is the cause of the POP. This repair might not be a DIY because of the lethal high voltage surrounding the CRTs tubes.
The slow response from the remote could be because the coolant has affected the main board where the IR signal are going to the remote sensor.
Let me know if you require further assistance.

Posted on Dec 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No picture on my pioneer TV model SD-582hd5


The problem is on lamp try to replace it to get back the picture..

Feb 23, 2012 | Pioneer SD-P55A3-K 55" Rear Projection...

1 Answer

THE TV STAYS OFF


If the sound keeps working your probably just need a new lamp, if the sound does not stay on, you probably to get someone to fix the power supply.

Sep 02, 2009 | Pioneer SD-582HD5 58" Rear Projection...

1 Answer

Pioneer SD-582HD5 Picture looks 3D with red and blue copies of images seperated on the screen..


Replace BOTH of your convergence ICs they are big black ICs will have part number on them if 110s use 180s.

Feb 18, 2009 | Pioneer SD-582HD5 58" Rear Projection...

1 Answer

Pioneer SD-582HD5 - screen went black, no sound, however the power switch - red light on the front panel is still on


There are actually two fuses on the smps F201 (6.3a) & F202 (5a) if either or both of these are open the problem is not likely the fuse. What I try and tell customers is that a fuse being open is merely a symptom, never the cause.
This particular unit is plagued with poor solder connections which case the voltages to flutter violently and the symptoms you're experiencing... You would be wise to remove the power supply and replace it or have it rebuilt. There are a number of companies that specialize in rebuilding boards of this nature or any qualified shop could do it if they had the whole Tv, since they probably don't have a jig special for that unit.
In summary, check the two fuses above and just be prepared that replacing them won'y solve the problem and most likely just open the new fuses in a short time.
Bill

Premuim Technologies
PO Box 442
Long Beach, WA. 98631
360-642-4993

Sep 13, 2008 | Pioneer SD-582HD5 58" Rear Projection...

1 Answer

50" Pioneer TV blacks out and has shadow on the bottom third


yes it is worth fixing.if you r getting it repaired for the first time.
but you will have to wait for some long time to get it repaired as the tv is very old its very difficult to get the parts for reparing it.

the problem what you r facing is the problem of the convergence in your main board of the tv.
it has to be repaired.
i will advise you to get it repaired as it will work.

for doing it your self you can try clicking this link and following the given instructions in it

http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm

thanks.

Jun 25, 2008 | Pioneer SD-533HD5 53" Rear Projection HDTV

1 Answer

Picture/sound goes out after 10 minutes of TV use


Rear projection hdtv, most likely damaged tubes. Don't repair this by your self get a tv repair man to do it before you injure your self.

Jun 24, 2008 | Pioneer SD-582HD5 58" Rear Projection...

1 Answer

Vertical problem


should have taken it back day 1

Dec 12, 2007 | Pioneer SD-582HD5 58" Rear Projection...

2 Answers

Pioneer SD-532HD5


This fault happens with just about any tube type projection set. The convergence IC's simply need to be replaced. They are two black, 2"X3", stand up ICs that will start with the letters STK on the surface of them and are mounted up against a large metal heatsink. If you have the soldering skills this should not be so hard for you to do, but please if you do not have the skills or experience to replace these IC's call in a pro to assist you with this repair. Good Luck

Mar 28, 2007 | Pioneer SD-582HD5 58" Rear Projection...

Not finding what you are looking for?
Pioneer SD-582HD5 58" Rear Projection HDTV-Ready Television Logo

383 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69845 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6393 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...