Question about Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 60 series grinds when spin starts

Just replaced a broken coupler. Worked well for 5 days then started making grinding noise when washer goes into spin and starts pumping out water. Rechecked the coupler and its all good. Washer is pretty old.....But would like to fix this one.

Posted by on

  • padtae Dec 21, 2008

    The grinding noise happens sometimes when the washer is used, not all the time, could it be something floating around in the gearcase?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 179 Answers

Try taking the pump off the motor and see if the grinding noise stops could be something in your pump or a bad pump

Posted on Dec 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Kenmore 70 series washer sounds like it has something stuck in it and makes a grinding and buzzing noise the agitator will barely move but the washer will drain but not spin


That could be the motor coupler. It could also be the transmission. It is pretty easy to fix. I recently worked on my brother's washer:

Aug 04, 2012 | Kenmore 20722

1 Answer

My Kenmore 80 series washer won't spin, and it just makes a loud gear grinding noise. What could this be, and how do I fix, in the simplest form please I'm chick... :)


rebecca it is probably the motor coupler. Move or slide ur machine over and if there is ruber filings under it then it is the coupler.

Apr 04, 2012 | Kenmore 24032\24036 Top Load Washer

1 Answer

I have a kenmore 90 series washer that won't spin. It makes a grinding type noise at that point in the cycle. I followed the trouble shooting guide and checked the motor/gearbox coupler. The coupler looks...


If the coupling is OK then the problem is most likely to be further up the drive-line, which means the gearbox has probably failed. .........Nomess

May 16, 2010 | Washing Machines

1 Answer

Machine won't drain, or spin and makes a grinding noise


This problem sounds like it could be serveal different thing. A motor that has a broken coupler will make a grinding sound. This machine does not use a belt. A gearcase can aslo make a loud noise when defective. Once I found a wire bra inside a pump and it made a grinding noise. All these things must be check in order to figure out what and where the problems lies.

Mar 23, 2010 | Kenmore 23822 Top Load Washer

1 Answer

Kenmore 80 Series washer will not spin; MOD#110-22882101


you need to replace the motor coupler between the motor and the trans.,let me know if you need more help,mike

May 26, 2009 | Washing Machines

1 Answer

Kenmore washer will not agitate or spin & makes grinding noise


CHECK THE MOTOR coupler located between the motor and then transmission this will be a good place to start if you lean back the washer and look from the bottom you will see a thing between the motor and the tranny that looks like a oreo cookie check and see if that is broken in any way

Jan 11, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Squeaking/grinding/rattle noise during wash and spin


That sounds like a clutch problem - probably just worn and need replacement. Will definitely need to pull to find exact fault.

Regards

Nov 16, 2008 | Washing Machines

8 Answers

Kenmore Washing Machine 70 series


You most likely have a broken coupler between the motor and gearcase.
You can buy the part for about $10 or have someone come out and replace it for about $150-200.
If you will post the complete model number from the the washer so I can see which style cabinet you have, I will try to walk you through the repair. It isn't very complicated if you are handy with home repairs.
With the age of the machine it probably just needs a coupler, but it could also have a problem in the transmission or basket drive that has caused the failure.

Nov 13, 2007 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 24032\24036 Top Load Washer Logo

Related Topics:

173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...