Question about JVC KD-G140 Car CD Player

3 Answers

Don't know how to set the clock on my jvc kd-g240/kd-g140 car stereo

Posted by on

  • 2 more comments 
  • robin102669 Dec 20, 2008

    Thank you for you help, I have this manual the only thing it says is clock h and clock m, I didn't see any buttons that say that. I just don't see instruction on how to do it on this manual. I had someone else check it out too. I appreciate you help

  • Anonymous Dec 31, 2008

    How the hell do you set the time on this cd receiver (JVC KD-G140).
    I would appreciate some help. Thank you.


  • Anonymous Jan 17, 2009

    You would think this stereo system is user friendly but it's not. I can't figure out how to program anything. Thanks for uploading the manuel for this unit. I'm gonna give it a try.

  • Anonymous Feb 10, 2009

    I have the same problem.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

Like he said hold sel down fer a feww seconds and use yer skip up and down buttons to scroll threw the menu and then when u hit clockH use the volume button to chage it and go back and do he same to clock M and then hit sel to finish.

Posted on Jan 16, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Press and hold the sel button until the menu pops up then scroll through til you see clock settings.

Posted on Dec 07, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 341 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i set clock on jvc kdg140


Press and hold SEL until menu appears
Using the scan button (FWD/REV), select Clock H
Using the volume knob/button, set the value
Using the scan button (FWD/REV), select Clock M
Using the volume knob/button, set the value
Press SEL to save and exit

May 11, 2010 | JVC KD-G140 Car CD Player

1 Answer

Need info on wire color coding for jvc car cd player: JVC KD-G140


Try going to the crutchfield website and look for help installing stereo. they can get you vehicle specific wiring codes for free. Also, almost everey stereo has common color codes for wiring. red- switched batt. +, yellow-constant batt. +, black= ground, blue- power anrenna, etc.

Apr 12, 2010 | JVC KD-G140 Car CD Player

1 Answer

Need change clock time


turn key on car but once ur stereo is on turn ur stereo off not the car then ull see just the clock on then go to set.

Mar 24, 2010 | JVC KD-G140 Car CD Player

1 Answer

Can't set clock i have a jvc kd-g140


hold sel for a few seconds then search threw using yer skip up and skip down button. untill u hit clock H then use yer volume botton to change.... then hi yer skip up again untill u hit clock M and use yer volume again. then hit sel to finish.

Nov 19, 2009 | JVC KD-G140 Car CD Player

1 Answer

Set clock on radio


Hello atesha23,

Below is the step-by-step procedure for setting the JVC clock. Please note that after you have entered the PSM mode, if you have not pressed a button for about 2 seconds, the radio will automatically exit the mode and return to normal operating mode. In that case, you must restart PSM by holding the "SEL" button until the display changes.

(1). Enter the PSM mode by pressing and holding the
SEL button until the display changes.
(2). Use the rocker switch left/right until "CLOCK
H" is displayed.
(3) Set the clock hours by turning the volume
control up/down.
(4) Press the rocker switch again until "CLOCK M"
is displayed.
(5) Set the clock minutes by turning the volume
control up/down.
(6) Press the SEL button to finish and EXIT.

Hope this helps.

Mar 31, 2009 | JVC KD-G140 Car CD Player

1 Answer

Clock setting on jvc kd-g140 car audio deck


Press the Mode button (M) and the display will flash mode. Then hold the select button (SEL) until it changes to display something else. Hit left and right seek until you find clock M and clock H. Hit select again and use the volume button to change the time! Took me two freaking hours to figure that **** out.

Jan 11, 2009 | JVC KD-G140 Car CD Player

1 Answer

SET THE CLOCK ON THE STEREO


I have Modle # KD-G140 and i dont remember how to set the clock

Oct 27, 2008 | JVC AM FM CD DET FACE CAR STEREO

1 Answer

Unable to play MP3 CDs on JVC KD-G140


I had this same problem and realized after reading the manual that this model does not play mp3's. They use the same manual for the g140 and the g240 (the model which plays mp3s).

May 19, 2008 | JVC 50W x 4 MOSFET CD Deck with MP3...

2 Answers

Car clock setting


For the JVC KD-G200 look here for instructions on how to set the clock...

http://www.fixya.com/support/p187738-jvc_kd_g200_cd_player/manual-17158/page-9

Nov 25, 2007 | JVC KD-G200 CD Player

Not finding what you are looking for?
JVC KD-G140 Car CD Player Logo

Related Topics:

673 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio Receivers Experts

kakima

Level 3 Expert

96396 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

Radames Pagan
Radames Pagan

Level 3 Expert

195 Answers

Are you a JVC Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...