Question about Konica Minolta magicolor 2400 Laser Printer

1 Answer

Error i refilled my toner in my magicolor 2400w and need to reset my error light

Posted by on

  • tonyremax Jan 10, 2009

    thank you ,works perfect,............instead of tape I put a credit card ,makes the wife happy!!!

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

The only way to reset the toner error is to replace the counter chip on the toner cartridge. These should go for about $10 a piece. Otherwise, you can set the engine to continue on error, and ignore the blinking light. Better yet, I put a piece of electrical tape over it. You can still read the status on the LED's, but not have your wife complain about it. Saves you $40.

Posted on Jan 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Minolta 2400W errors


GO and get 4 Konicminolta image units one for each color and replace them do not use third party. NEVER ever use a vacuum cleaner the static electricity can cause sensors to go bad !!!!!!!!!!!! might have destroyed the chips on the image units SO recommend get all new hopefully you did not destroy the control board with static electricity

Apr 27, 2010 | Minolta magicolor 2400W Laser Printer

1 Answer

How to deactivate toner colour errors?


if any toner ends in a printer, then replace it.otherwise error will show continuously.

Apr 22, 2010 | Konica Minolta magicolor 2400 Laser...

1 Answer

The ERROR light of my Minolta magicolor 2400W Laser Printer stays on. I have inserted a new drum and all the cartridges are full. What do I do?


Try to open the blue cover and close it. Then press a few times the "rotate toner" button. After that powerswitch off and on, should run.
If it´s don´t worked, make sure you have every transport secure away from the cartridges.
The contact`s should be clean in Printer and on cartridges.
If still the same prob, start from first tip.
It´s worked by my 2400W feed new toner.

Nov 25, 2009 | Minolta magicolor 2400W Laser Printer

1 Answer

Replaced drum error light blinking


Start the Konica Minolta Status application on your PC and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Apr 14, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Error light flashed when trying to print with Magicolor 2400W


Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Jan 20, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Using refill not intended for 2400W


You need to be careful about the size of the grains in the toner. I would use toners from other printers of the same make and model series, but when you go outside them you really need to know the exact natue (specifications) or the toner you use. The chips just reset the counter that the printer tracks to tell you when you are just about out, but they are not critical for operation, but you must set the print engine to continue on error.

Oct 13, 2008 | Konica Minolta magicolor 2400 Laser...

1 Answer

Konica magicolor 2400W


To clear chip after refilling toner cartriage.
Go to "Tonerfillyourself.com" I bought refill toner and it includes a new chip and it's not hard to replace it. (Comes with instructions)

Apr 09, 2008 | Konica Minolta magicolor 2400 Laser...

1 Answer

Error light, can't find the problem


Hi, you should check the position of paper sensor flag, called "actuator" (part number 4139 3505 02). On the picture - part 15. The "paper jam" error message means also - "toner cartidge missing", "paper out" or "photoconductor missing" e8dd7eb.gif

Sep 12, 2007 | Minolta magicolor 2400W Laser Printer

Not finding what you are looking for?
Konica Minolta magicolor 2400 Laser Printer Logo

641 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6117 Answers

David Burkhart
David Burkhart

Level 2 Expert

210 Answers

George Mclaughlin

Level 2 Expert

339 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...