Hook The VGA Cord (PC INPUT) into Your Laptop's Hookup Spot Turn The TV Input to VGA Or PC or Computer and on the Laptop it should show up if you Hit The Function Key + F8 If You Are using A Desktop Hook It To the VGA Out Just Like You Where Hooking Up To A Computer and Turn The INPUT on the TV to VGA or PC or Computer and it should show up just like A Computer Monitor
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hey william, Ok. A portible computer can connect wirelessly as long as you have a router from a supporting cable provider. what this means is lets say you have cable from...xfinity. They will set you up with a router like any other company. This router pravides a wireless adaption to your computer that can last about 3 floors up and 3 miles away. Click the bars on your task bar and click "scan for available connections" and choose your connection. sadly you can only go wired but after that get a yellow support wire and plug in to the computer and hock it up to the TV and put the computer`s sleep mode off. this sleep mode will basicly turn off all programs and go to sleep cutting off the internet on your TV. IF YOU WISH TO PUT YOUR TV WIRELESSLY THEN GO TO OPTIONS AND PRESS INTERNET AND CONNECT AND THERE YOU GO!
Problem is in either power supply or the Y-Sustain board.
The Y-Sustain is a relatively large board out of which go connections to the side of the display; it's therefore closer to either the left or the right side of the display, has at least one rather large heat sink on it and fat power cables connecting it to the main power supply.
Often there are fuses on that board - one or more.
if they are blown you can try to replace them, but expect them to blow again - usually the whole board needs to be replaced.
often that *needs* to be done in a service center as there are some adjustments to be made after replacement; don't know about this particular TV model, but it's a common thing for the plasma TVs... I hope this will help in solving the problem
This is a LCD tv right?U want to hook up free air or pay cable tv.Go in ur tv menu goto setup,go down to CH.press than pick AIR or CABLE.Than just pick one press scan u will get all free air channels or get all ur pay cable channels